ELECTRICAL SOLUTIONS A. System Overview Pan-Ty ® Push Mount Ties • Natural nylon material for indoor use • Weather resistant material has greater resistance to damage caused by ultraviolet light – indoor or outdoor use • Heat stabilized material for high temperature applications up to 239°F (115°C) – indoor use • Wingless design allows tie to be used in confined spaces • Cable tie, mount, and fastener in a single part • Economical push mount ties are used to attach bundles to another surface such as a flat panel • Anchor is easily pressed into a pre-formed hole and locks in place • Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties PLP1.5I Head Design PLP2S-C Part Number C1. Wiring Duct C2. Surface Raceway PLP2S-M0 Length In. mm Width Thickness In. mm In. mm Nominal Max. Hole Panel Dia. Thickness In. mm In. mm Max. Min. Bundle Loop Recommended Std. Dia. Tensile Str. Installation Pkg. In. mm Lbs. N Tool Qty. Std. Ctn. Qty. C3. Abrasion Protection 1000 C4. Cable Management Nylon 6.6 Intermediate Cross Section PLP1.5I-C 6.1 156 .135 3.4 .045 1.1 .187 4.7 .093 2.4 1.25 32 40 178 GTS, GTSL, GS2B, PTS, PPTS, STS2 100 GTS, GTSL, GS2B, GTH, GS4H, PTS, PTH, PPTS, STS2, STH2 1000 10000 Standard Cross Section PLP1S-M 5.3 135 .180 4.6 .050 1.3 .250 6.4 .125 3.2 1.00 25 50 222 PLP1.5S-M 6.7 170 .180 4.6 .050 1.3 .250 6.4 .125 3.2 1.50 38 50 222 PLP2S-C 7.9 200 .180 4.6 .050 1.3 .250 6.4 .125 3.2 1.75 45 50 222 D1. Terminals 1000 10000 100 1000 Weather Resistant Nylon 6.6 D2. Power Connectors Intermediate Cross Section PLP1.5I-M0 6.1 156 .135 3.4 .045 1.1 .187 4.7 .093 2.4 1.25 32 40 178 GTS, GTSL, GS2B, PTS, PPTS, STS2 1000 25000 D3. Grounding Connectors GTS, GTSL, GS2B, GTH, GS4H, PTS, PTH, PPTS, STS2, STH2 1000 10000 E1. Labeling Systems Standard Cross Section PLP1S-M0 5.3 135 .180 4.6 .050 1.3 .250 6.4 .125 3.2 1.00 25 50 222 PLP2S-M0 7.9 200 .180 4.6 .050 1.3 .250 6.4 .125 3.2 1.75 45 50 222 1000 10000 E2. Labels Heat Stabilized Nylon 6.6 Intermediate Cross Section PLP1.5I-M30 6.1 156 .135 3.4 .045 1.1 .187 4.7 .093 2.4 1.25 32 40 178 GTS, GTSL, GS2B, PTS, PPTS, STS2 1000 25000 GTS, GTSL, GS2B, GTH, GS4H, PTS, PTH, PPTS, STS2, STH2 1000 10000 Standard Cross Section PLP1S-M30 5.3 135 .180 4.6 .050 1.3 .250 6.4 .125 3.2 1.00 25 50 222 PLP2S-M30 7.9 200 .180 4.6 .050 1.3 .250 6.4 .125 3.2 1.75 45 50 222 1000 10000 E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory) B1.33