Dynamic Cable Manager Specification Sheet

Dynamic Cable Manager
S P E C I F I C AT I O N S H E E T
specifications
The dynamic cable manager shall reduce the strain
that static mounts experience during the opening
and closing of electrical cabinet doors. The cable
bundle shall remain stationary with a ball-and-socket
tether transferring and absorbing the strain during
assembly, installation, and transportation. The
mounts shall be manufactured from a Nylon 6.6
material with a rubber adhesive.
technical information
Patent:
Pending
Mount material:
Nylon 6.6
Color:
White
Adhesive type:
Rubber
Adhesive application
temperature range:
-40°F to 120°F (-40°C to 49°C); continuous
Environmental compliance:
2002/95/EC RoHS
key features and benefits
Unique mount design
Transfers the dynamic load of the bundle away from the edge of
the mount; preventing mount from peeling off panel surface
Ball-and-socket tether
Retains position of bundle relative to hinge while opening and
closing panel door(s), reduces normal load by up to 70% with
bundles over three-quarters of an inch, and reduces peak shear
loads by up to 75% compared to typical static mounts; eliminating
the risk for potential shocks and shorts that could damage
internal components and extending service life of cable bundles
and mounts
Universal slot design
Permits use of any cable tie up to 50 Ibs. minimum loop tensile
strength; providing design flexibility
Rubber adhesive
Rated for service conditions -40°F to 120°F (-40°C to 49°C);
suitable for use within the control panel environment
applications
The Panduit dynamic cable manager is a
reliable and cost-effective solution for securing
cable bundles in control panels that have
hinged access into the panel box, which also
ensures continuity of the related systems in
the physical infrastructure. These mounts are
well suited for use with control panels
featuring control lights, touch pads, and
w w w. p a n duit .c om
switches in the panel door. The unique mount
allows the panel door to be easily opened
and closed and extends the service life of
the adhesive in applications where bundle
movement is unavoidable.
Dynamic Cable Manager
1.12" x 1.12"
(28.4mm x 28.4mm)
mounting base:
ABDCM30-A-C
Recommended Cable Ties
Use with Pan-Ty ® or Dome-Top ®
Barb Ty Cable Ties up to
Standard cross section
(50 lbs. minimum
loop tensile strength)
Dynamic Cable Manager
ordering information
Part Number
ABDCM30-A-C
Used With
Cable Ties
Mounting
Method
Miniature,
Intermediate,
Standard
Rubber
Adhesive
Length
A
Overall
Width
C
Width
B
Height
D
In.
mm
In.
mm
In.
mm
In.
mm
Material
Color
Std.
Pkg.
Qty.
1.12
28.4
1.12
28.4
1.98
50.3
0.66
16.8
Nylon 6.6
White
100
Std.
Ctn.
Qty.
1000
A
B
C
D
typical installation
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
[email protected]
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
[email protected]
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
[email protected]
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
[email protected]
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
[email protected]
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
[email protected]
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
©2015 Panduit Corp.
ALL RIGHTS RESERVED.
Contact Customer Service by email: [email protected]
or by phone: 800.777.3300
Replaces WW-WASP11
WASP37--WW-ENG
11/2015
Similar pages