2x2 and 4x4 Fiber-Duct Routing System: FRSP14--WW-ENG

2x2 and 4x4 Fiber-Duct™ Routing System
S p e c i f i c a t i o n S H EET
specifications
The 2x2 and 4x4 routing systems shall be used to route, segregate, and protect
fiber optic and communication cabling. The solid wall routing systems should be
UL Listed as an optical fiber channel for general purpose use. They shall be
compliant with UL 2024A and NEC articles 770 and 800 when installed per
instructions. The slotted wall channel and cover shall be UL Recognized. A
full complement of fittings with a 2" minimum bend radius, snap-on covers, and
mounting brackets shall be available. Channel and fittings shall be manufactured
from impact-resistant and flame retardant (V-0) materials. Channel shall have
non-slip snap-on covers that can be easily removed to allow access for moves,
adds, and changes. Channel and fittings finish shall be pure color, resist
scratches, dents, and not peel or corrode. Available system colors shall be
yellow, orange, black, and light gray. A full complement of brackets shall be
available for attaching system components to ladder rack, threaded rod,
auxiliary framing, equipment racks, and raise floor pedestals.
technical information
2.25"
(57.1mm)
4.25"
(107.9mm)
4.10"
(104.1mm)
2.25"
(57.1mm)
A = 4.0 in.2
(2580mm2)
Dimensions are in inches (Dimensions in parentheses are metric).
Open channel 50% fill capacity (2" pile up):
2x2 Fiber-Duct™ System
Fiber Optic Ribbon Interconnect
Augmented
Open channel 50% fill capacity (4" pile up):
4x4 Fiber-Duct™ System
Fiber Optic Ribbon Interconnect
Augmented
Cable
1.6mm
2.0mm
3.0mm
5.20mm
Category 6, 6.1mm
Category 6, 7.6mm
No. of Cables
562
359
160
53
39
25
1.6mm
2.0mm
3.0mm
5.20mm
Category 6, 6.1mm
Category 6, 7.6mm
2343
1499
666
221
161
103
Material:
Rigid PVC (channel), ABS (fittings)
Flammability:
94V-0
Approvals:
UL Listed to 2024A Optical Fiber Cable Routing
Assemblies UL Recognized (File No. E147128) slotted
wall CSA Certified (File No. 016446 0 000) slotted wall
CSI spec form:
LP-CSISPEC-FD-1
key features and benefits
Large capacity 2"x 2"
and 4" x 4" sizes
Ideal for routing, segregating, and protecting large amounts of fiber
cabling; provides a more secure installation for fiber or high performance
copper cabling
Minimum 2" bend radius
control fittings
Bend radius control in fittings helps prevent excessive bends in fiber optic
and high performance copper cabling
Snap-on covers
Covers snap on or off channel and fittings to enclose or gain access to
system; fully encloses the channel to provide protection per UL 2024A;
provides quick and easy access for moves, adds, and changes
Mates to Panduit cable
management rack panels
Provides methods to mate system to equipment mounted on standard EIA
19" or 23" equipment racks and vertical cable managers
applications
The Fiber-Duct™ 2x2 and 4x4 Routing Systems are
comprised of channel, fittings, and brackets designed
to segregate, route, and protect fiber optic cable
and copper cabling. It is suited for data center
applications where cable is routed from distribution
areas to equipment cabinets or racks. It is used in
Telco Central Offices to route fiber optic jumper
cables between fiber distribution frames and
equipment bays. It can be deployed over the
racks or in approved under floor applications.
Fittings maintain a minimum 2" bend radius to
w w w. pa n d u it.c o m
protect against signal loss due to excessive cable
bends. Available system colors are yellow, orange,
black, and light gray to differentiate various types of
cabling. A full complement of brackets is available to
attach system components to support structures
found in all applications. The Fiber-Duct™ 2x2 and
4x4 Routing Systems are part of the Panduit
complete fiber distribution system, which includes
the FiberRunner ® 24x4, 12x4, 6x4, 4x4, and 2x2
Routing Systems, cable management, and racks.
Channel and Cover
2x2 solid wall channel (6'):
4x4 solid wall channel (6'):
2x2 slotted wall channel (6'):
4x4 slotted wall channel (6'):
2x2 cover (6'):
4x4 cover (6'):
Fittings and Spillouts
2x2 coupler:
4x4 coupler:
2x2 horizontal right angle:
4x4 horizontal right angle:
2x2 horizontal tee:
4x4 horizontal tee:
2x2 4-way cross:
4x4 4-way cross:
2x2 end cap:
4x4 end cap:
2x2 inside vertical 45°:
4x4 inside vertical 45°:
2x2 outside vertical 45°:
4x4 outside vertical 45°:
2x2 inside vertical
right angle:
4x4 inside vertical
right angle:
2x2 outside vertical
right angle:
4x4 outside vertical
right angle:
4x4 to 2x2
Fiber-Duct ™ Reducer:
2x2 bend radius
control trumpet:
4x4 bend radius
control trumpet:
4x4 innerduct transition:
4x4 adapter to TE 4x4
FiberGuide*:
4x4 adapter to various
4x4 systems:
2x2 plastic snap rivet:
4x4 plastic snap rivet:
Plastic bolts and wing nuts:
Plastic bolts and hex nuts:
2x2 vertical tee:
4x4 vertical tee:
1-port spillout to 1.5" I.D.
corrugated tubing:
2-port spillout to 1.5" I.D.
corrugated tubing:
3-sided vertical tee
trumpet spillout:
3-sided BRC trumpet
spillout for 2x2 exit:
Mounting Brackets
Existing 1/2" thr rod brkt:
Existing 5/8" thr rod brkt:
New 1/2" thr rod brkt:
New 5/8" thr rod brkt:
Under-floor brkt:
Ladder rack brkt:
"L" wall mount brkt:
Adjustable "Z" bracket:
Low profile "Z" bracket:
EIA/TIA threaded rod
mounting bracket:
Two-piece ladder
rack 1/2" thr rod:
Two-piece ladder
rack 5/8" thr rod:
Two-piece framing clip 5/8"
hr rod to 9/16" C-channel
aux. framing bars:
S2X2**6NM
S4X4**6NM
E2X2**6
E4X4**6
C2**6
C4**6
FCF2X2**
FCF4X4**
FRA2X2**
FRA4X4**
FT2X2**
FT4X4**
FFWC2X2**
FFWC4X4**
FEC2X2**
FEC4X4**
FIV452X2**
FIV454X4**
FOV452X2**
FOV454X4**
FIVRA2X2**
FIVRA4X4**
FOVRA2X2**
FOVRA4X4**
FRF42**
TRC2BL
TRC4BL
FITF4X4B
FADC4X4
FTDNS4X4**
NR2WH
NR4BL
F14PWN
F14PN
FVTHD2X2**
FVT4X4**
FIDT2X2**
FIDT4X4BL
FTR4X4**
FTR2X2**
FTRBE12
FTRBE58
FTRBN12
FTRBN58
FUSB
FLRB
FLB
FZBA1.5X4
FZBLP
FEIAB58
F2PCLB12
F2PCLB58
FRAFC58
*TE 4x4 FiberGuide Management Systems
is a registered trademark of TE Connectivity.
**Substitute:YL = Yellow, OR = Orange,
BL = Black, and LG = Light Gray.
2x2 and 4x4 Fiber-Duct™ Routing System
Channel and Cover
S2X2**6NM
S4X4**6NM
E2X2**6
E4X4**6
C2**6
C4**6
Fittings and Spillouts
FCF2X2**
FCF4X4**
FOVRA2X2**
FOVRA4X4**
F14PWN
FRA2X2**
FRA4X4**
FT2X2**
FT4X4**
FRF42**
F14PN
FFWC2X2**
FFWC4X4**
TRC2BL
TRC4BL
FVTHD2X2**
FVT4X4*
FEC2X2**
FEC4X4**
FITF4X4B
FIV452X2**
FIV454X4**
FADC4X4
FIDT2X2**
FIDT4X4BL
FLB
FZBA1.5X4
FOV452X2**
FOV454X4**
FTDNS4X4**
FTR4X4**
FIVRA2X2**
FIVRA4X4**
NR2WH
NR4BL
FTR2X2**
Mounting Brackets
FTRBE12
FTRBE58
FEIAB58
FTRBN12
FTRBN58
FUSB
FLRB
FZBLP
FRAFC58
F2PCLB12
F2PCLB58
**Substitute: YL = Yellow, OR = Orange, BL = Black, and LG = Light Gray.
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
[email protected]
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
[email protected]
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
[email protected]
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
[email protected]
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
[email protected]
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
[email protected]
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: [email protected]
or by phone: 800.777.3300
©2014 Panduit Corp.
All rights reserved.
FRSP14--WW-ENG
Replaces WW-FRSP07
1/2014
Similar pages