New Product New Introduction Product Introduction NEW! PAN1327/1317 SERIES BLUETOOTH® RF MODULES Dual-Mode ANT™ and Wireless Bluetooth® Connectivity Introducing Panasonic’s newest breakthrough in wireless networking, the PAN1327/1317 Series RF Modules featuring both Dynastream’s ANT wireless protocol and Bluetooth connectivity. This powerful new technology combination creates a low cost, ultra-low power wireless networking solution for short range applications. The ANT protocol is perfectly suited for low data rate sensor network topologies in personal area networks (PANs) and practical wireless sensorP networks (WSN’s). The PAN1327/1317 provides a building block for ANT+™i devices, allowing the creation of interoperable products through implementation of ANT+ device profiles. ANT+ managed network software facilitates the collection, automatic transfer and tracking of sensor data for monitoring personalBluetooth-Module wellness information. ANT applications are most commonly found in sports and low power medical devices. The PAN1327/1317 Host Controlled Interface (HCI) Series also brings Texas Instrument’s CC2567, to an easy-to-use module format. Panasonic’s tiny footprint technology offers a module of only 85.5 mm2 including antenna. The modules are designed to accommodate PCBs pad pitch of 1.3mm and as little as two layers for easy implementation and manufacture. PAN1450 OUTLINES - ENW89803J The PAN1450 provides wireless interface per the BT 1.2 specification. Interoperability and BT compliance testing have been completed for the BT Chip ZV4301 from Zeevo, Inc. to facilate rapid time-to-market. TM The BT Chip incorporates a widely popular 32-bit ARM7TDMI CPU core with sufficient bandwidth to support a wide range of embedded µController applications and the module provides full ARM7 software development access. The PAN1450 is manufactured in a 13,4 x 18,7 x 2,2 mm³ SMD package and the only external component needed is an 50 ohm antenna. Any customizations for the software can be handled with our recommended partners. FEATURES Supply Voltage Range: 1.7 - 4.8V Profiles: SPP, A2DP andOverview AVRCP - Inquiry results with RSSI (1.2) frequency hopping (AFH) enabled (1.2) Based upon TI’s CC2567-- Adaptive High throughput (>600 kbps) - Hold-, Park- and Sniffmode Integrates with TI’s ultra - low-power MSP430 Up to 128 bit encryption - Audio capability on an SCO channel microprocessor - Support for very low power modes - sleep and deep sleep - All bluetooth data rates (up to 57,6/723,2Kbps) • Very fast algorithm for both ACL and eSCO User Interfaces • Supports Extended Range Tx power with 10dBm - Full-speed USB version 2.0 compliant - Programmable baud rate UART (9,6 Kbps - 921,6 Kbps) typical output - Debug UART (DUART) General Purpose I/O‘s (interruptible) • Low power scan method-- 16 for page and inquiry scans PCM audio (1 channel) at 1/3rd normal power - SPI and JTAG interface ENW-89827A2JF PAN1327, CC2567, Bluetooth & ANT, HCI module, antenna BLUET ODULES M Description TH QUAL OO B01839 PR ED Part Numbers Radio Features - High sensitivity design (-86 dBm typ.) - Integrated RF shield - Class 2 module (0dBm typ. output power) - One antenna port IF I PAN1327 Part Numbers: • • • • TM IRELESS • Best-in-class Bluetooth RF performance (Tx power, Rx sensitivity, blocking) • Fully Qualified Bluetooth v4.0 EDR • Dimensions PAN1327: 9mm x 9.5mm x 1.8mm (width x length x height) • Dimensions PAN1317: 6.5mm x 9mm x 1.7mm (width x length x height) • Certifications: Bluetooth, FCC, IC and CE • Operating Temperature Range: -20ºC to +70ºC (Optional -40ºC to +85ºC) W Product Performance: Cut the Cable ODUCT Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is any doubt regarding the safety of this product, kindly inform us immediately for technical consultation. PAN1450 Rev. A PAN1317 Part Numbers: Part Numbers Description ENW-89827C2JF PAN1317, CC2567, Bluetooth & ANT, HCI module, no antenna www.panasonic.com/rfmodules [email protected] 1-800-344-2112 Copyright © 2011 Panasonic Corporation of North America. All Rights Reserved. Specifications are subject to change without notice. PAN1327NPI Rev. 1.1, FY10-052-XXX New Product New Introduction Product Introduction Block Diagram PAN1327: Interfaces: The PAN1327/PAN1317 Host Controlled Interface supports several transport layers with the following features: • UART Rates of up to 4Mbps • Three and Four Wire UART Transport Applications: • Sports and Fitness • Heart Rate Monitor • Blood Pressure Sensor • Blood Glucose Meter • Thermometer • • • • • • Assisted Living • Flood Alarm • Heating Control • Automatic Key Control Industrial Sensors Toys Entertainment Devices Mobile Accessories All Bluetooth Wireless Applications Block Diagram PAN1317: Bluetooth Module Pin Compatibility: Series Description PAN1315 BT Classic PAN1317 Dual Mode BT and ANT PAN1325 BT Classic with antenna PAN1327 Dual Mode BT and ANT with antenna Compatibility 100% Pin Compatible 100% Pin Compatible All Panasonic Bluetooth RF Modules are 100% pin compatible with the next generation of Bluetooth Classic and Low Energy devices. This unique design feature enables designers to seamlessly transition between Bluetooth Classic, Low Energy and ANT enabled modules, addressing larger markets and providing migration paths to circumvent obsolescence. Technical Specifications for PAN1327 and PAN1317: Parameter Receiver Sensitivity (BER=10-3) Value -93 dBm Condition / Notes GFSK, Typical, Dirty TX On Output Power 10 dBm VDD_In = VBAT Power Supply 1.7 - 4.8 V Battery or DC/DC Ultra Low Power Scan 135 uA 1.28s Interval GFSK DH1\DH5 33 mA Full Throughput -20°C to + 70°C -40°C to + 85°C Optional Operating Temperature Range www.panasonic.com/rfmodules [email protected] 1-800-344-2112 Copyright © 2011 Panasonic Corporation of North America. All Rights Reserved. Specifications are subject to change without notice. PAN1327NPI Rev. 1.1, FY10-052-XXX