ATK0000CE37

Light Touch Switches/EVPAE
4.5 mm×2.2 mm Side-operational Edge Mount
Light Touch Switches
Type:
EVPAE
■ Features
● External dimensions : 4.5 mm×2.25 mm (Excluding
the push plate), Height 2.9 mm (Printed circuit board
being as low as 0.95 mm)
● Improved soldering strength in the operating direction
● Long operational life
● Measure against electro static discharge(ESD)
■ Recommended Applications
● Operation switches for portable electronic equipment
(Mobile phones, Digital still cameras, Camcorders
Portable audio players, etc.)
■ Explanation of Part Numbers
1
2
3
4
5
&
7
1
"
&
Product Code
Type
6
7
8
9
Height
■ Specifications
Type
Snap action / Push-on type SPST
Rating
Contact Resistance
Electrical
Insulation Resistance
Dielectric Withstanding Voltage
Bouncing
Operating Force
Mechanical
Endurance
Push Travel
1000 mΩ max.
100 MΩ min. (at 100 Vdc)
250 Vac (1 minute)
10 ms max. (ON, OFF)
1.6 N, 3.0 N, 3.5 N
1.6 N, 3.0 N, 3.5 N : 0.15 mm 1.6 N (With L-shape terminals) : 0.13 mm
Push Strength
50 N (1 minute)
Operating Life
200000 cycles min.
Operating Temperature
Storage Temperature
Minimum Quantity/Packing Unit
Quantity/Carton
10 μA 2 Vdc to 20 mA 15 Vdc (Resistive load)
–40 °C to +85 °C
–40 °C to +85 °C (Bulk)
–20 °C to +60 °C (Taping)
3500 pcs. Embossed Taping (Reel Pack)
17500 pcs.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2015
Light Touch Switches/EVPAE
■ Dimensions in mm (not to scale)
No. 1
(General dimension tolerance : ± 0.2)
( )dimensions are reference dimensions.
EVPAE
1
1 2 1'
2
1'
Edge Mount
+00.5
–0.10
0
1.5±0.1
0.8±0.1
R0.3 max.
1
2
1'
R0.3 to R0.5
2-0.25 max. (0.2tpy)
1±0.1
0.3±0.1
2-0.6±0.1
0.6±0.1
0.08 +00.7
0
0.4 max.
(0.3tpy)
Dimensions for reference
2.2
+0.2
1.7 –0.1
+0.2
4.8 0
3.1±0.1
1.35±0.1
+0.08
+0.2
+00.8
–0.05
0.95
1.65±0.1
0.4 max. (0.3tpy)
3.3
3.6 –0.1
2.6 –0.1
Circuit Diagram
0.55
2.9
1.5
4.5
2.2
2-0.25 max.
3.8 +0.1
0
5.6±0.1
Note : Please put your consideration
not to let any burrs of printed
wiring board stick out from
the mounting surface of our switches.
PWB land pattern for reference
Push plate side
(2.3)
✻ Height from surface of PCB : 0.95 mm
Part Numbers
Operating Force
Height
Push Plate Color
Operating Life
EVPAEBB2A
1.6 N
0.95 mm
Black
200000 cycles
EVPAEDB2A
3.0 N
0.95 mm
Black
200000 cycles
EVPAEJB2A
No. 2
3.5 N
0.95 mm
Black
200000 cycles
EVPAE
(General dimension tolerance : ± 0.2)
( )dimensions are reference dimensions.
1
2
1'
1 2 1'
With L-shape terminals
回路図
GND
0.95 –0.10
+0.05
GND
0.6±0.1
0.43±0.10
0.55
1.5
2.9
0.6
2.2
+0.08
3-1.65±0.10
+0.2
2.2
1.7 –0.1
2.6 –0.1
+0.2
5.55
(2.3)
Part Numbers
EVPAEGE2A
2-f0.65 0
GND terminal shall be
inserted to this hole.
1'
2-0.3 max.
+0.1
3.8 0
5.4±0.1
6.4±0.1
Push plate side
PWB land pattern for reference
✻ Height from surface of PCB : 0.95 mm
Operating Force
Height
1.6 N
2
2-0.3 max.
0.6±0.1
2-0.6±0.1
+0.10
1
2-0.65±0.10
2-1.1±0.1
2-0.3±0.1
4.5
3.1±0.1
1.5±0.1
0.8±0.1
1.35±0.10
3.6 –0.10
3-0.4 max. (0.3tpy)
R0.15
3.3
0.95 mm
Note : Please put your consideration
not to let any burrs of printed
wiring board stick out from
the mounting surface of our switches.
Push Plate Color
Operating Life
Black
200000 cycles
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2015
Light Touch Switches/EVPAE
■ Recommended Reflow Soldering Conditions
● Embossed Carrier Taping
Fan or Normal Temp.
230
180
Tape width=12.0 mm
t1
Feeding hole
Chip pocket
P2 P0
fD0
E
150
F
W
A
B
Operation Top (°C)
MAX.
260
(Normal Temp.)
t2
90±30
P1
Chip component
Tape running direction
40±10
Soldering Time (s)
Unit: mm
Part No.
Height
A
B
W
EVPAE
2.9
5.5±0.2
2.9±0.2
12.0±0.3
F
E
P1
5.5±0.1 1.75±0.10 8.0±0.1
P2
P0
D0 Dia
t1
t2
2.0±0.1
4.0±0.1
1.5+0.1
0
0.3±0.1
3.3±0.20
P2
P0
D0 Dia
t1
t2
2.0±0.1
4.0±0.1
1.5+0.1
0
0.3±0.1
3.3±0.20
With L-shape terminals
Unit: mm
Part No.
Height
A
B
W
F
EVPAE
2.9
6.1±0.2
2.9±0.2
12.0±0.3
5.5
E
P1
1.75±0.10 8.0±0.1
● Standard Reel Dimensions in mm (not to scale)
T
E
Item
C
A
B
D
E
013.0±0.5
021.0±1.0
2.0±0.5
B
Rate (mm) 0380.0±2.0 080.0±1.0
C
D
r
A
W
Item
W
T
t
r
Rate (mm)
13.5±1.0
17.5±1.0
—
—
t
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2015
Similar pages