158302260.pdf downloaden

A Dimensions: [mm]
B Recommended land pattern: [mm]
D Absolute Maximum Ratings (Ambient Temperature 25°C):
Properties
Test conditions
Value
Unit
PDiss
198
mW
100
mA
Continuous Forward Current
IF Peak
IF
60
mA
Reverse Voltage
VRev
5
V
ESD Threshold/ Human Body Modell
Absolute thermal resistance junction to solder
point
VESD
2000
V
RθJS
32
K/ W
Junction temperature
Tj
125
°C
Power dissipation
Peak Forward Current
C Schematic:
duty/10
@1kHz
E General information:
•Operating temperature: -40°C to +85°C
•Storage temperature (on tape & reel): -40°C to +85°C; 60% RH max.
•Moisture Sensitivity Level (MSL): 3
DESCRIPTION
Optical Properties:
Properties
Value
Chip Technology
InGaN
Emitting Color
Cool White
Lens Type
Top LED
WL-SWTP SMD White Top View PLCC LED
3.0
2016-06-18
KaS
ZAn
2.1
2015-03-23
SSt
HOe
2.0
2014-11-10
SSt
ZAn
1.1
2014-06-03
SSt
PLD
1.0
2014-01-30
SSt
PLD
REV
DATE
BY
CHECKED
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
[email protected]
Order.- No.
158302260
SIZE
A4
Size: 3022
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
D Electrical & Optical Properties:
Properties
F1 Viewing Angle:
Value
Test conditions
min.
Chromaticity coordinate X according to CIE 1931
60 mA
cx
Chromaticity coordinate Y according to CIE 1931
60 mA
Luminous Flux
60 mA
Forward Voltage
60 mA
cy
Φv
VF
Correlated Color Temperature
60 mA
CCT
Reverse Current
5V
Color Rendering Index
60 mA
IRev
CRI
Viewing Angle
60 mA
2θ50%
typ.
Unit
max.
0.3233
0.3327
19
22
3.2
lm
3.4
V
5
μA
6000
85
K
90
120
°
DESCRIPTION
WL-SWTP SMD White Top View PLCC LED
3.0
2016-06-18
KaS
ZAn
2.1
2015-03-23
SSt
HOe
2.0
2014-11-10
SSt
ZAn
1.1
2014-06-03
SSt
PLD
1.0
2014-01-30
SSt
PLD
REV
DATE
BY
CHECKED
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
[email protected]
Order.- No.
158302260
SIZE
A4
Size: 3022
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
F2 Spectral:
F3 Forward Current vs. Forward Voltage:
DESCRIPTION
WL-SWTP SMD White Top View PLCC LED
3.0
2016-06-18
KaS
ZAn
2.1
2015-03-23
SSt
HOe
2.0
2014-11-10
SSt
ZAn
1.1
2014-06-03
SSt
PLD
1.0
2014-01-30
SSt
PLD
REV
DATE
BY
CHECKED
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
[email protected]
Order.- No.
158302260
SIZE
A4
Size: 3022
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
F4 Luminous Intensity vs. Forward Current:
F5 Derating Curve:
DESCRIPTION
WL-SWTP SMD White Top View PLCC LED
3.0
2016-06-18
KaS
ZAn
2.1
2015-03-23
SSt
HOe
2.0
2014-11-10
SSt
ZAn
1.1
2014-06-03
SSt
PLD
1.0
2014-01-30
SSt
PLD
REV
DATE
BY
CHECKED
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
[email protected]
Order.- No.
158302260
SIZE
A4
Size: 3022
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
F6 Chromaticity diagram:
F6 Chromaticity Performance - Bin groups from
5300K to 5600K
Cx
Cy
5600K to 6000K
Cx
Cy
6000K to 6500K
Cx
Cy
561
0.3290
0.3417
601
0.3215
0.3350
651
0.3130
0.3290
0.3290
0.3538
0.3207
0.3462
0.3115
0.3391
0.3376
0.3616
0.3290
0.3538
0.3205
0.3481
0.3371
0.3490
0.3290
0.3417
0.3213
0.3373
0.3290
0.3417
0.3215
0.3350
0.3130
0.3290
0.3290
0.3300
0.3222
0.3243
0.3144
0.3186
0.3290
0.3417
0.3215
0.3350
0.3130
0.3290
0.3371
0.3490
0.3290
0.3417
0.3213
0.3373
0.3366
0.3369
0.3290
0.3300
0.3221
0.3261
0.3290
0.3300
0.3222
0.3243
0.3144
0.3186
562
602
652
DESCRIPTION
WL-SWTP SMD White Top View PLCC LED
3.0
2016-06-18
KaS
ZAn
2.1
2015-03-23
SSt
HOe
2.0
2014-11-10
SSt
ZAn
1.1
2014-06-03
SSt
PLD
1.0
2014-01-30
SSt
PLD
REV
DATE
BY
CHECKED
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
[email protected]
Order.- No.
158302260
SIZE
A4
Size: 3022
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
G Packaging Specification - Tape and Reel [mm]:
DESCRIPTION
WL-SWTP SMD White Top View PLCC LED
3.0
2016-06-18
KaS
ZAn
2.1
2015-03-23
SSt
HOe
2.0
2014-11-10
SSt
ZAn
1.1
2014-06-03
SSt
PLD
1.0
2014-01-30
SSt
PLD
REV
DATE
BY
CHECKED
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
[email protected]
Order.- No.
158302260
SIZE
A4
Size: 3022
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
H Soldering Specifications:
H2: Classification Reflow Profile:
H1: Classification Reflow Profile for SMT components:
Profile Feature
Pb-Free Assembly
Preheat
- Temperature Min (Tsmin)
- Temperature Max (Tsmax)
- Time (ts) from (Tsmin to Tsmax)
150°C
200°C
120 seconds max.
Ramp-up rate (TL to TP)
3°C/ second max.
Liquidous temperature (TL)
Time (tL) maintained above TL
217°C
60 seconds max.
Peak package body temperature (Tp)
250°C max.
Time within 5°C of actual peak temperature (tp)
10 seconds max.
Ramp-down rate (TP to TL)
6°C/ second max.
Time 25°C to peak temperature
220 seconds max.
Applied cycles
2 cycles max.
DESCRIPTION
WL-SWTP SMD White Top View PLCC LED
3.0
2016-06-18
KaS
ZAn
2.1
2015-03-23
SSt
HOe
2.0
2014-11-10
SSt
ZAn
1.1
2014-06-03
SSt
PLD
1.0
2014-01-30
SSt
PLD
REV
DATE
BY
CHECKED
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
[email protected]
Order.- No.
158302260
SIZE
A4
Size: 3022
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
I Cautions and Warnings:
The following conditions apply to all goods within the product series of WL-SWTP
of Würth Elektronik eiSos GmbH & Co. KG:
General:
All recommendations according to the general technical specifications of the data sheet have to be complied with.
The usage and operation of the product within ambient conditions, which probably alloy or harm the component surface, has to be avoided.
If the product is potted in customer applications, the potting material might shrink during and after hardening. The product is exposed to the
pressure of the potting material with the effect that the LED body, pins or termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endangered to be affected. After the potting material is cured, the LED body, pins or termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.
The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of
the customer. All technical specifications for standard products do also apply to customer specific products.
Washing varnish agent that is used during the production to clean the customer application might damage or change the characteristics of the
LED body, pins or termination. The washing varnish agent could have a negative effect on the long term function of the product.
Product specific:
Follow all instructions mentioned in the data sheet, especially:
•The soldering profile has to be complied with according to the technical reflow/ or wave soldering specification, otherwise this will void the
warranty.
•All products shall be used before the end of the period of 12 months based on the product date code, if not a 100% solderability can´t be
ensured.
•Violation of the technical product specifications such as exceeding the absolute maximum ratings will void the warranty.
•It is also recommended to return the LEDs to the original moisture proof bag and reseal the moisture proof bag again.
•Certain LED surfaces consist of soft material. Pressure on the top surface has to be handeled carefully to prevent negative influence to the
function and reliability of the LEDs.
•ESD prevention methods need to be applicated for manual handling and processing by machinery.
•Resistors for protection are obligatory.
•Luminaires in operation could harm human vision or skin on a photo-biological level, therefore direct light impact has to be avoided. All
products are additionally certified as risk groups 0 to 2 according to DIN EN 62471:2008
Direct mechanical impact to the product shall be prevented as the material of the LED body, pins or termination could flake or in the worst case it could break.
The standard deliveries include values in the range and limitation as defined in the Electrical & Optical Properties specified in the datasheet.
On each reel, only one bin is sorted and taped. The bin is defined on intensity, chromaticity coordinate or wavelength and forward voltage. In
order to ensure highest availability, the reel binning of standard deliveries can vary. A single bin cannot be ordered. Please contact us in advance, if you need a particular bin sorting before placing your order to clarify the lead time, MOQ and pricing.
DESCRIPTION
WL-SWTP SMD White Top View PLCC LED
3.0
2016-06-18
KaS
ZAn
2.1
2015-03-23
SSt
HOe
2.0
2014-11-10
SSt
ZAn
1.1
2014-06-03
SSt
PLD
1.0
2014-01-30
SSt
PLD
REV
DATE
BY
CHECKED
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
[email protected]
Order.- No.
158302260
SIZE
A4
Size: 3022
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
J Important Notes:
The following conditions apply to all goods within the product range of
Würth Elektronik eiSos GmbH & Co. KG:
1. General Customer Responsibility
Some goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain
application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to
the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described
in the product specification is valid and suitable for the respective customer application or not.
2. Customer Responsibility related to Specific, in particular Safety-Relevant Applications
It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.
In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure
of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of
the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.
Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at
www.we-online.com.
3. Best Care and Attention
Any product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty.
4. Customer Support for Product Specifications
Some products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in
charge should be contacted who will be happy to support in this matter.
6. Product Life Cycle
Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about
inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available.
Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered.
The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.
7. Property Rights
All the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as
well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth
Elektronik eiSos GmbH & Co. KG.
Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth
Elektronik eiSos GmbH & Co. KG components or services are used.
8. General Terms and Conditions
Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth
Elektronik eiSos Group”, last version available at www.we-online.com.
5. Product R&D
Due to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product
Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the
PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected.
DESCRIPTION
WL-SWTP SMD White Top View PLCC LED
3.0
2016-06-18
KaS
ZAn
2.1
2015-03-23
SSt
HOe
2.0
2014-11-10
SSt
ZAn
1.1
2014-06-03
SSt
PLD
1.0
2014-01-30
SSt
PLD
REV
DATE
BY
CHECKED
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
[email protected]
Order.- No.
158302260
SIZE
A4
Size: 3022
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Similar pages