346

1N6672
1N6672R
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 346, REV. A
HERMETIC ULTRAFAST RECOVERY RECTIFIER
DESCRIPTION: 300 VOLT, 15 AMP, 35 NS, RECTIFIER IN A HERMETIC TO-254 PACKAGE.
MAX RATINGS/ELECTRICAL CHARACTERISTICS
ALL RATINGS ARE AT TA = 25 C UNLESS OTHERWISE SPECIFIED.
RATING
PEAK INVERSE VOLTAGE (PER LEG)
SYMBOL
MAX.
UNITS
PIV
300
Volts
Vf
1.35
Volts
MAXIMUM FORWARD VOLTAGE DROP (PER LEG)
0
IF = 10A, TA = 25 C
0
1.55
IF = 20A, TA = 25 C
0
IF = 10A, TA = -55 C
0
MAXIMUM DC OUTPUT CURRENT (TC = 100 C) (PER LEG)
PEAK SINGLE CYCLE SURGE CURRENT tp = 8.3 msec.
MAXIMUM REVERSE RECOVERY TIME (If = 0.5A, Ir = 1.0A, Irr = 0.25A)
0
MAXIMUM REVERSE CURRENT Ir @ PIV PER LEG (TC = 25 C)
1.45
IO
15
Amps
IFSM
150
Amps
trr
35
nsec
Ir
50
A
5
mA
0
(TC = 100 C)
R
MAXIMUM OPERATING TEMPERATURE RANGE
TOP
-55 to
+175
C
JUNCTION CAPACITANCE VR = 10Vdc, f = 1MHz
CJ
150
pF
JC
VSIG = 50mV (p-p) (Max)
* Suffix R denotes common anode version.
©2012 Sensitron Semiconductor 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681
PHONE( 631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
2.0
0
MAXIMUM THERMAL RESISTANCE (PER LEG)
C /W
1N6672
1N6672R
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 346, REV. A
MECHANICAL DIMENSIONS: In Inches / mm
.149 (3.78
Dia.
.139 3.53)
(6.60
6.32)
(1.27
1.02)
.800 (20.32
.790 20.07) .545 (13.84
.535 13.58)
.685 (17.40
.665 16.89)
1.235 (31.37
1.195 30.35)
.260
.249
.050
.040
.545 (13.84
.535 13.60)
1
2
.045 (1.14
.035 0.89)
3 Plac es
3
.150(3.81) BSC
2 Plac es
.150(3.81) BSC
TO-254
PINOUT TABLE
TYPE
DUAL RECTIFIER, COMMON CATHODE
DUAL RECTIFIER, COMMON ANODE (R)
PIN 1
ANODE 1
CATHODE 1
PIN 2
COMMON CATHODE
COMMON ANODE
PIN 3
ANODE 2
CATHODE 2
SCHEMATIC
1
2
3
COMMON CATHODE
1
2
3
COMMON ANODE
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
©2012 Sensitron Semiconductor 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681
PHONE( 631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
Similar pages