7461117.pdf downloaden

1
2
3
4
(5x2,54= 12,7 )
A
B
(5x2,54= 12,7 )
M10
3 ±0,5
Bevelled edge 0,3 ±0,2 around
B
D
3,5 ±0,2
C
28,5
10
10
q 16
E
DETAIL B (5:1)
Execution: Press-Fit
Surface coating [email protected] Sn on [email protected] Cu
(TOLERANCES)
(PROJECTION)
DIN ISO 2768-m
(SURFACE)
SCALE
(MATERIAL)
DATE
NAME
(TITLE)
DRAWN 2009/07/15 Dino Cantara
Power
VERIFIED 2009/07/15 Heiko Schmid
F
2:1
CuZn39Pb3
(1:1)
TOTAL WEIGHT: 32,7 g
WEIGHT Cu: 0,0669 g
WEIGHT Sn: 0,1370 g
Element 90° with threaded hole M10
full plain Pin-Plate
(DRAWING NUMBER)
Sheet
7461117
ISSUE
CHANGE
DATE
NAME
CONFIDENTIAL !! ALL RIGHTS RESERVED. Passing on or duplication without prior written agreement prohibited.
1
1
1
2
3
4
Drill hole specification for chemical surfaces
A
O 1,6 -0,03
min. 0,1
O 1,475 ±0,05
B
min. 25>m copper max. 60>m
Drill hole specification for HAL
C
O 1,6 -0,03
min. 0,1
O 1,45 ±0,05
D
max. 15>m Sn
min. 25>m copper max. 60>m
E
(PROJECTION)
This electronic component is designed and developed with the intention for use in general electronics equipments.
Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control,
submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention,
medical, public information network etc. where highersafety and reliability are especially required or if there is
possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval.
In addition, even electronic component in general electronic equipments, when used in electricalcircuits that require
high safety, reliability functions or performance, the sufficient reliabilityevaluation-check for the safety must be
performed before by the user before usage.
(SURFACE)
(TOLERANCES)
SCALE
20:1
(MATERIAL)
DIN ISO 2768-m
DATE
NAME
(TITLE)
DRAWN 2013/08/27 Dino Cantara
VERIFIED 2013/08/27 Wladimir Werz
F
Power Elements Specification
Press-fit system
(DRAWING NUMBER)
ISSUE
CHANGE
DATE
NAME
CONFIDENTIAL !! ALL RIGHTS RESERVED. Passing on or duplication without prior written agreement prohibited.
Sheet
1
1
Similar pages