1 2 3 4 ( 5,08 ) A (2x2,54= 5,08 ) B O 0,1 3,2 +0,2 - 3,8 ±0,2 B D q7 3,5 ±0,2 Bevelled edge 0,3 ±0,2 around 5 ±0,2 17,5 3 ±0,5 C DETAIL B (5:1) E (1:1) Execution: Press-Fit Surface coating 5-10Am Sn on 2-4Am Cu (TOLERANCES) (PROJECTION) DIN ISO 2768-m (SURFACE) DATE NAME (TITLE) DRAWN 2009/07/14 Dino Cantara VERIFIED 2009/07/14 Heiko Schmid F 2:1 CuZn39Pb3 SCALE (MATERIAL) TOTAL WEIGHT: 3,7 g WEIGHT Cu: 0,0141 g WEIGHT Sn: 0,0289 g Power Element 90° with hole Ø3,2 two Rows Pin-Plate (DRAWING NUMBER) Sheet 7461062 ISSUE CHANGE DATE NAME CONFIDENTIAL !! ALL RIGHTS RESERVED. Passing on or duplication without prior written agreement prohibited. 1 1 1 2 3 4 Drill hole specification for chemical surfaces A O 1,6 -0,03 min. 0,1 O 1,475 ±0,05 B min. 25>m copper max. 60>m Drill hole specification for HAL C O 1,6 -0,03 min. 0,1 O 1,45 ±0,05 D max. 15>m Sn min. 25>m copper max. 60>m E (PROJECTION) This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where highersafety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electricalcircuits that require high safety, reliability functions or performance, the sufficient reliabilityevaluation-check for the safety must be performed before by the user before usage. (SURFACE) (TOLERANCES) SCALE 20:1 (MATERIAL) DIN ISO 2768-m DATE NAME (TITLE) DRAWN 2013/08/27 Dino Cantara VERIFIED 2013/08/27 Wladimir Werz F Power Elements Specification Press-fit system (DRAWING NUMBER) ISSUE CHANGE DATE NAME CONFIDENTIAL !! ALL RIGHTS RESERVED. Passing on or duplication without prior written agreement prohibited. Sheet 1 1