Permafluor Architectural Finishes ™ High Performing Paints That Let You Design In Vibrant Living Color Black Boysenberry Hartford Green Sandstone Classic Bronze Military Blue Bone White Colonial White Antique Bronze Dove Gray Dark Ivy Charcoal Redwood Sea Wolf Medium Bronze Superior Performance Coatings That Meet AAMA 2605 Requirements There’s a painted finish as expressive and enduring as the buildings you design. Permafluor™ Architectural Coatings combine beauty and successful performance as only a 70% fluoropolymer based coating can. Permafluor™ colors add life to your architectural expressions. Fifteen standard colors and a limitless pallet of custom colors can satisfy your creative needs. The standard colors are always in stock at Kawneer Paint Facilities for fast turn around while the Permafluor™ custom colors can be formulated to meet your needs. This is a paint that endures along with your architectural statement. Permafluor™ is formulated to maintain integrity for years. Outstanding durability translates to substantial maintenance savings over the life of the building. Thousands of buildings throughout the world are a testament to the lasting beauty and performance of Kawneer standard Permafluor™ Architectural Coatings. Kawneer #22 Stock Permafluor™ Architectural Coatings The 15 standard Permafluor™ colors shown on this chart are Kawneer #22 stock coatings. They are stocked at Kawneer Paint Facilities for fast turn around of painted projects. The following specifications are required for the proper application and end-use results of Permafluor™. Performance properties represent minimum results when Permafluor™ is applied according to specifications. Guide Specifications Permafluor™ coating will meet or exceed test requirements of AAMA 2605, Voluntary Specification, Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Aluminum Extrusions and Panels. Performance Table CriteriaPerformance AAMA 2605 Meets or Exceeds Substrate Aluminum only Pretreatment Multi-Stage Cleaning and Conversion Coating Dry Film Thickness (ASTM D 7091) 1.2 mil Specular Gloss (ASTM D 523) Low and Medium Dry Film Hardness (ASTM D 3363) F minimum Impact Resistance 1/10" Deformation No Loss of Adhesion Abrasion Resistance (ASTM D 968) Coefficient of 40 minimum Salt Spray (ASTM G85 Annex A5) Hours: 2,000 Scribe or cut edges: Rating 7 Field: Rating 8 Humidity Resistance (ASTM D 2247 or ASTM D4585) Hours: 4,000 Few #8 Blisters Max. 10 Years South Florida Color Change: 5DE (Hunter) Units Max. Chalk Resistance: Rating 8 Max. 10% Muriatic Acid Spot Test 15 min. No Blistering or Visual Change Mortar (Alkali) Resistance 24 Hour Spot Test, No Visual Change 72 Hour Detergent Immersion (@ 100° F) No Loss of Adhesion Boiling Water Adhesion No removal of film after 20 min. exposure The following are guidelines for specifying and applying Permafluor™: Pretreatment – The aluminum shall be thoroughly cleaned using a multi-stage cleaning process to remove organic and inorganic surface soils and residual oxides. Apply a chemical conversion coating to which organic coatings will firmly adhere. Primer – The cleaned and treated substrate shall be primed to a thickness of 0.2 – 0.3 mils using approved factory application methods. Paint – The Permafluor™ paint system shall contain 70% PVDF (Hylar 5000® or Kynar 500®) resin and durable ceramic pigments. It shall be factory applied and oven baked for a topcoat film thickness of 1.0 mil minimum. Clear topcoat, if required, shall be applied at 0.4 – 0.8 mils. Kawneer Company, Inc. Technology Park / Atlanta 555 Guthridge Court Norcross, GA 30092 kawneer.com kawneergreen.com 770 . 449 . 5555 © Kawneer Company, Inc. 2014 LITHO IN U.S.A. Form No. 14-2195 Permafluor™ is a trademark of Kawneer Company, Inc. and Alcoa Inc. Hylar 5000® is a registered trademark of Solvay Solexis, Inc., Kynar 500® is a registered trademark of Arkema Inc. * Note: These color samples are as close as possible to actual colors offered within the limitations of printing techniques. Final color specification shall be as per approved color samples. Permafluor™ finishes are formulated for Kawneer Company, Inc.