4227

SHD325311
SHD325311P
SHD325311N
SHD325311D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4227, REV. C
HERMETIC ULTRAFAST RECTIFIER
SINGLE / DUAL - COM. CATHODE / COM. ANODE / DOUBLER
DESCRIPTION: 200 VOLT, 20 AMP, 35 NANOSECOND HERMETIC RECTIFIERS IN TO-254 PACKAGE.
Ceramic Seal Option – For ceramic seals use part number prefix SHDC
MAX RATINGS/ELECTRICAL CHARACTERISTIC
ALL RATINGS ARE AT TA = 25 C) UNLESS OTHERWISE SPECIFIED
RATING
PEAK INVERSE VOLTAGE (PER LEG)
SYMBOL
MAX.
UNITS
PIV
200
Volts
MAXIMUM FORWARD VOLTAGE DROP @ TA = 25C (PER LEG)
SINGLE / COMMON CATHODE (P)
Vf
If = 10 Amps
If = 16 Amps
Volts
1.0
1.1
1.2
If = 20 Amps
MAXIMUM FORWARD VOLTAGE DROP @ TA = 25C (PER LEG)
COMMON ANODE (N) / DOUBLER (D)
Volts
Vf
If = 10 Amps
1.1
1.2
1.3
If = 16 Amps
If = 20 Amps
MAXIMUM FORWARD VOLTAGE DROP @ TA = 125C (PER LEG)
SINGLE / COMMON CATHODE (P)
Vf
1.0
1.1
Volts
IO
20
Amps
IFSM
200
Amps
trr
35
nsec
MAXIMUM REVERSE CURRENT Irr @ PIV (PER LEG) @ TA = 25C
Irr
10
A
MAXIMUM REVERSE CURRENT Irr @ PIV (PER LEG) @ TA = 125C
Irr
1.0
mA
MAXIMUM JUNCTION CAPACITANCE(PER LEG) @ VR = 10V, f = 1MHz
CJ
150
pF
MAXIMUM THERMAL RESISTANCE (PER LEG)
RJC
2.0
C/W
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
Top/stg
-55 to
+150
C
COMMON ANODE (N) / DOUBLER (D)
If = 16 Amps
O
MAXIMUM DC OUTPUT CURRENT (TC = 100 C)
PEAK SINGLE CYCLE SURGE CURRENT (PER LEG)
tp = 8.3 msec
MAXIMUM REVERSE RECOVERY TIME (PER LEG) @ If = 0.5A, Ir = 1.0A,
Irr = 0.25A
©2013 Sensitron Semiconductor  221 WEST INDUSTRY COURT  DEER PARK, NY 11729-4681
 PHONE (631) 586-7600  FAX (631) 242-9798  www.sensitron.com  [email protected]
SHD325311
SHD325311P
SHD325311N
SHD325311D
SENSITRON
TECHNICAL DATA
DATA SHEET 4227, REV. C
MECHANICAL DIMENSIONS: In Inches / mm
.149
(3.78
.139
3.53)
Dia.
.685 (17.40
.665 16.89)
1.235
(31.37
1.195
30.35)
1
.045
2
(1.14
.035
0.89)
3 Places
.545
(13.84
.535
13.60)
.800
(20.32
.790
20.07)
.545
(13.84
.535
13.58)
.260
(6.60
.249
6.32)
.050
(1.27
.040
1.02)
3
.150(3.81) BSC
.150(3.81) BSC
2 Places
TO-254
PINOUT TABLE
DEVICE TYPE
SINGLE RECTIFIER
DUAL RECTIFIER/COMMON CATHODE (P)
DUAL RECTIFIER/COMMON ANODE (N)
DUAL RECTIFIER/DOUBLER (D)
PIN 1
CATHODE
ANODE 1
CATHODE 1
ANODE
PIN 2
ANODE
COMMON CATHODE
COMMON ANODE
ANODE/ CATHODE
PIN 3
ANODE
ANODE 2
CATHODE 2
CATHODE
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of
the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation
of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or
any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use
at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party.
When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
©2013 Sensitron Semiconductor  221 WEST INDUSTRY COURT  DEER PARK, NY 11729-4681
 PHONE (631) 586-7600  FAX (631) 242-9798  www.sensitron.com  [email protected]