PACKAGE MECHANICAL INFORMATION SOT23-6 Package Outline Dimensions This surface mount package consists of a chip mounted on a leadframe and fully encapsulated in an epoxy mold compound. With Pb-Free terminations, this package meets the requirements of IPC/Jedec J-STD-20, moisture level 1 at 260 °C. 0.35 - 0.50 (0.014 - 0.020) 0.85 - 1.05 (0.033 - 0.040) 6 5 4 2.60 - 3.00 (0.102 - 0.118) 1 2 0.20 (0.007) 0 - 10 ° 3 1.70 - 2.10 (0.067 - 0.083) 0.35 - 0.55 (0.014 - 0.022) 2.80 - 3.05 (0.110 - 0.120) 0.90 - 1.30 (0.035 - 0.051) 0.09 - 0.20 (0.004 - 0.008) 1.50 - 1.75 (0.059 - 0.070) 0.90 - 1.45 (0.036 - 0.057) DIMENSIONS = MILLIMETERS (INCHES) NOVEMBER 2015 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. SOT23-6 Tape and Reel Dimensions The product is packaged in tape and reel format per EIA-481 standard. P 0 P 1 d PART ORIENTATION T E Index Hole 120 ° F D2 W B PIN 1 D1 D P A Trailer ....... ....... End C Device ....... ....... ....... ....... Leader ....... ....... W1 Start DIMENSIONS: 10 pitches (min.) MM (INCHES) 10 pitches (min.) Direction of Feed Item Symbol SOT23-6 Carrier Width A 3.90 ± 0.10 (0.154 ± 0.004) Carrier Length B 3.90 ± 0.10 (0.154 ± 0.004) Carrier Depth C 0.90 ± 0.10 (0.035 ± 0.004) Sprocket Hole d 1.55 ± 0.05 (0.061 ± 0.002) Reel Outside Diameter D 178 (7.008) Reel Inner Diameter D1 50.0 MIN. (1.969) Feed Hole Diameter D2 13.0 ± 0.20 (0.512 ± 0.008) Sprocket Hole Position E 1.75 ± 0.10 (0.069 ± 0.004) Punch Hole Position F 3.50 ± 0.05 (0.138 ± 0.002) Punch Hole Pitch P 4.00 ± 0.10 (0.157 ± 0.004) Sprocket Hole Pitch P0 4.00 ± 0.10 (0.157 ± 0.004) Embossment Center P1 2.00 ± 0.05 (0.079 ± 0.002) Overall Tape Thickness T 0.20 ± 0.10 (0.008 ± 0.004) Tape Width W 8.00 ± 0.20 (0.315 ± 0.008) Reel Width W1 Quantity per Reel -- 14.4 MAX. (0.567) 3000 NOVEMBER 2015 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 3312 - 2 mm SMD Trimming Potentiometer SOT23-6 Recommended Land Pattern Dimensions 2.40 (0.094) 1.90 (0.074) 0.95 (0.037) 0.70 (0.028) 1.00 (0.039) DIMENSIONS = MILLIMETERS (INCHES) NOVEMBER 2015 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.