AJR

PACKAGE MECHANICAL INFORMATION
SMA
Package Outline Dimensions
2-Pin Plastic Small Outline Surface Mount
DO-214AC, JEDEC Publication 95
4.06 - 4.57
(.160 - .180)
2.29 - 2.92
(.090 - .115)
2
Index
Mark
(if needed)
2.00 - 2.40
(.079 - .095)
0.76 - 1.52
(.030 - .060)
1.58 - 2.16
(.062 - .085)
0.10 - 0.20
(.004 - .008)
1.27 - 1.63
(.050 - .064)
4.83 - 5.59
(.190 - .220)
DIMENSIONS ARE:
MILLIMETERS
(INCHES)
MD-SMA-001-a
JULY 2005
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
SMA
Tape Dimensions
2-Pin Plastic Small Outline Surface Mount Single-Sprocket Tape
3.90 - 4.10
(.154 - .161)
1.55 - 1.65
(.061 - .065)
1.95 - 2.05
(.077 - .081)
0.40
MAX.
(.016)
1.65 - 1.85
(.065 - .073)
5.45 - 5.55
(.215 - .219) 11.70 - 12.30
(.461 - .484)
3.90 - 4.10
(.154 - .161)
1.5
MIN.
(.059)
Direction of Feed
0 MIN.
8.20
MAX.
(.323)
Cover
Tape
4.50
MAX.
(.177)
Carrier Tape
Embossment
20°
Maximum component
rotation
Index
Mark
(If needed)
DIMENSIONS ARE:
Typical component
cavity center line
Typical component
center line
MILLIMETERS
(INCHES)
NOTES: A. The clearance between the component and the cavity must be within 0.05 mm (.002 in) MIN. to 0.65 mm (.026 in)
MAX. so that the component cannot rotate more than 20° within the determined cavity.
MD-SMA-002-a
B. Taped devices are supplied on a reel of the following dimensions:
Reel diameter:
330 mm ± 3.0 mm (12.99 in ± .12 in)
Reel hub diameter: 75 mm (2.95 in) MIN.
Reel axial hole:
13.0 mm ± 0.5 mm (.51 in ± .02 in)
C. 5000 devices per reel.
JULY 2005
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
SMA
Recommended Printed Wiring Land Pattern Dimensions
2-Pin Plastic Small Outline Surface Mount Land Pattern
2.34
(. 092)
1.90
(.075)
2.16
(.085)
DIMENSIONS ARE:
MILLIMETERS
(INCHES)
MD-SMA-003-a
JULY 2005
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Bourns Sales Offices
Region
The Americas:
Europe:
Asia-Pacific:
Phone
+1-951-781-5500
+41-41-7685555
+886-2-25624117
Fax
+1-951-781-5700
+41-41-7685510
+886-2-25624116
Phone
+1-951-781-5500
+41-41-7685555
+886-2-25624117
Fax
+1-951-781-5700
+41-41-7685510
+886-2-25624116
Technical Assistance
Region
The Americas:
Europe:
Asia-Pacific:
www.bourns.com
Bourns® products are available through an extensive network of manufacturer’s representatives, agents and distributors.
To obtain technical applications assistance, a quotation, or to place an order, contact a Bourns representative in your area.
Reliable Electronic Solutions
“TISP” is a trademark of Bourns, Ltd., a Bourns Company, and is Registered in U.S. Patent and Trademark Office.
“Bourns” is a registered trademark of Bourns, Inc. in the U.S. and other countries.
COPYRIGHT© 2005, BOURNS, INC. LITHO IN U.S.A. e 08/05 TSP0410
JULY 2005
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Similar pages