Integrated Synthesizer/Mixer/Modulator Family Register Map Description

AN RFMD® REFERENCE MANUAL
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
RFMD’s second-generation integrated synthesizer/mixer products.
RFMD Multi-Market Products Group
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
1 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
REVISION HISTORY
Version
Date
1.5
12-Jul-12
1.4
01-Mar-12
1.3
1.2
1.1
06-June-11
05-May-11
07-Dec-10
1.0
0.4
0.3
0.2
25-Oct-10
22-Oct-10
29-Sep-10
06-Aug-10
0.1
0.0
01-Jul-10
24-Jun-10
Description of change(s)
Section 4.2 Default register settings updated. Details of chip
revision mrev_id added. IQ modulator references added.
Update to Register Map on Page 10 and to Register Content
Description on Pages 11 to 19. Addition of section 4.2.
Correction to Register Content Description on Page 17
Addition of new sections and drawings
Correction to p2presc Path2 VCO PLL feedback path divider
setting on Page 15
First publication
Publication prep
Slight changes before submitting to MarCom
Correct the number of address bits given in section 2 (should be
seven, not six) and update timing diagram.
Second draft.
Initial Draft for second version of chips
Author(s)
Eric Schonthal
Eric Schonthal
Eric Schonthal
Eric Schonthal
Barbara Cox
Robert Pipkin
Robert Pipkin
Chris Shepherd
Chris Shepherd
Chris Shepherd
Chris Shepherd
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
2 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
CONTENTS
1.
Introduction ............................................................................................................................................................................................ 5
2.
Timing ..................................................................................................................................................................................................... 6
2.1 Write Operation ................................................................................................................................................................................... 6
2.2 Read Operations ................................................................................................................................................................................. 6
3.
2.2.1
Three-Wire Bus Read Operation .......................................................................................................................................... 6
2.2.2
Four-Wire Bus Read Operation ............................................................................................................................................ 6
Device Setup........................................................................................................................................................................................... 8
3.1 Standby States .................................................................................................................................................................................... 8
3.2 Frequency Modulation ........................................................................................................................................................................ 8
3.2.1
Continuous Modulation ........................................................................................................................................................ 8
3.2.2
Binary FSK ............................................................................................................................................................................. 8
3.3 General Purpose Outputs ................................................................................................................................................................... 8
4.
3.3.1
Serial Bus Control ................................................................................................................................................................. 8
3.3.2
MultiSlice Operation ............................................................................................................................................................. 8
3.3.3
Frequency Modulation Input ................................................................................................................................................ 9
3.3.4
Lock Detect Output ............................................................................................................................................................... 9
3.3.5
Four-Wire Bus Operation ...................................................................................................................................................... 9
REGISTER MAP ..................................................................................................................................................................................... 10
4.1 Register Content Description .......................................................................................................................................................... 11
4.1.1
LF - Loop Filter Configuration (00h) ................................................................................................................................. 11
4.1.2
XO - Crystal Oscillator Configuration (01h) ...................................................................................................................... 11
4.1.3
CAL_TIME - Calibration Timing (02h) ............................................................................................................................... 11
4.1.4
VCO_CTRL - Calibration Control (03h).............................................................................................................................. 12
4.1.5
CT_CAL1 - Path 1 Coarse Tuning Calibration (04h) ........................................................................................................ 12
4.1.6
CT_CAL2 - Path 2 Coarse Tuning Calibration (05h) ........................................................................................................ 12
4.1.7
PLL_CAL1 - Path 1 PLL Calibration (06h) ........................................................................................................................ 13
4.1.8
PLL_CAL2 - Path 2 PLL Calibration (07h) ........................................................................................................................ 13
4.1.9
VCO_AUTO - Auto VCO select control (08h) ..................................................................................................................... 13
4.1.10 PLL_CTRL - PLL Control (09h) ........................................................................................................................................... 13
4.1.11 PLL_BIAS - PLL Bias Settings (0Ah) .................................................................................................................................. 14
4.1.12 MIX_CONT - Mixer Control (0Bh) [RFFC parts only] ......................................................................................................... 14
4.1.13 P1_FREQ1 - Path 1 Frequency 1 (0Ch)............................................................................................................................ 14
4.1.14 P1_FREQ2 - Path 1 Frequency 2 (0Dh) ........................................................................................................................... 14
4.1.15 P1_FREQ3 - Path 1 Frequency 3 (0Eh) ............................................................................................................................ 14
4.1.16 P2_FREQ1 - Path 2 Frequency 1 (0Fh) ............................................................................................................................ 15
4.1.17 P2_FREQ2 - Path 2 Frequency 2 (10h)............................................................................................................................ 15
4.1.18 P2_FREQ3 - Path 2 Frequency 3 (11h)............................................................................................................................ 15
4.1.19 FN_CTRL - Frac-N Control (12h) ....................................................................................................................................... 15
4.1.20 EXT_MOD - Frequency modulation control 1 (13h) ........................................................................................................ 16
4.1.21 FMOD - Frequency modulation control 2 (14h) .............................................................................................................. 16
4.1.22 SDI_CTRL - SDI Control (15h) ........................................................................................................................................... 16
4.1.23 GPO - General Purpose Outputs (16h) ............................................................................................................................. 16
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
3 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
4.1.24 T_VCO - Temperature Compensation VCO Curves (17h) ................................................................................................ 17
4.1.25 IQMOD1 – Modulator Calibration (18h) [RFMD208x only] ............................................................................................ 17
4.1.26 IQMOD2 – Modulator Control (19h) [RFMD208x only] .................................................................................................. 17
4.1.27 IQMOD3 - Modulator Buffer Control (1Ah) [RFMD2080 only]........................................................................................ 17
4.1.28 IQMOD4– Modulator Core Control (1Bh) [RFMD2080 only].......................................................................................... 18
4.1.29 TEMPC_CTRL – Temperature compensation control (1Ch) ........................................................................................... 18
4.1.30 DEV_CTRL - Readback register and RSM Control (1Dh) ................................................................................................ 19
4.1.31 TEST - Test register (1Eh) .................................................................................................................................................. 20
4.1.32 READBACK – Readback Register (1Fh) [RFMD208x only] ............................................................................................ 20
4.2 Default register settings .................................................................................................................................................................. 21
5.
References............................................................................................................................................................................................ 22
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
4 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
1. INTRODUCTION
This guide contains instructions on how to program RFMD’s second-generation integrated
synthesizer/mixer/modulator devices. It includes a description of the proprietary serial interface as well as
detailed information on the register map.
For more information, see “References” or visit http://www.rfmd.com.
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
5 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
2. TIMING
2.1
WRITE OPERATION
To perform a write operation the ENX line should be pulled low. The SCLK line is then used to clock the
data into the chip. The first bit is undefined; this is followed by the R/W bit set low, then the seven address
bits and the 16 data bits. The address and data bits are read on the rising edge of the clock signal. When
the register write is complete the ENX line should be pulled high.
Data write
ENX
CLK
DATA
X
W
a6
...
a0
d15
...
d0
Figure 1. Timing Diagram for Write Operation
2.2
READ OPERATIONS
2.2.1
Three-Wire Bus Read Operation
To perform a read operation the ENX line should be pulled low. The SCLK line is then used to clock the
data into the chip. The first bit is undefined; this is followed by the R/W bit set high, then the seven
address bits. The address bits are read on the rising edge of the clock signal. After 1.5 clock cycles delay
the 16 data bits are clocked out of the chip on the falling edge of the clock. When the register read is
complete the ENX line should be pulled high.
Data read
ENX
CLK
DATA
X
R
a6
...
a0
d15
...
d0
Figure 2. Timing Diagram for Three-Wire Bus Read Operation
2.2.2
Four-Wire Bus Read Operation
If the 4wire bit in the SDI_CTRL register has been set the data output stream is diverted to GPO41. To
perform a read operation the ENX line should be pulled low. The SCLK line is then used to clock the data
into the chip. The first bit is undefined; this is followed by the R/W bit set high, then the seven address
bits. The address bits are read on the rising edge of the clock signal. After 1.5 clock cycles delay the 16
data bits are clocked out of the chip on the falling edge of the clock and are available on the DOUT line.
When the register read is complete the ENX line should be pulled high.
Note:
If GPO4 is also configured as a LOCK output the data output signal is only available from
this pin when the ENBL line is low.
1
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
6 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
Data read (4-wire)
ENX
CLK
DATA
X
R
a6
...
a0
DOUT
d15
...
d0
Figure 3. Timing Diagram for Four-Wire Bus Read Operation
t1
Data write
ENX
t2
t3
State machine
t1 Reset time >20ns
t2 Setup time >20ns
t3 Hold time
>20ns
CLK
DATA
X
t4
t6
Data read
ENX
Prog bit
t5
t4
t6
t5
d0
t4
t5
t6
t3
a0
t4
d15
t5
t4
d0
t5
t4
>20ns
>20ns
Read/write
500
ns
t6 Turn around >
19.2
CLK
DATA
Data
t4 Setup time
t5 Hold time
t5
Figure 4. Critical Timing Diagram
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
7 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
3. DEVICE SETUP
3.1
STANDBY STATES
It is possible to configure the device so that the frequency synthesizer and VCO remain operating when the
device is disabled. The pllst bit in the PLL_CTRL register should be set.
3.2
FREQUENCY MODULATION
The modulation frequency is Fref * modulation / 2(24 - modstep)
where modulation is in 2’s complement format and is found in the FMOD register and modstep is found in
the EXT_MOD register. The maximum allowable value for modstep is 8.
3.2.1
Continuous Modulation
If the modsetup bits in the EXT_MOD register are set to 01 it is possible to change the frequency of the
VCO by writing to the modulation bits in the FMOD register. By continuously writing these bits it is possible
to continuously vary the deviation frequency of the VCO thus implementing a simple form of analogue
modulation.
3.2.2
Binary FSK
If the modsetup bits in the EXT_MOD register are set to 11 the frequency of the VCO can be switched in a
binary fashion either side of the carrier by the frequency programmed into the modulation bits of the
FMOD register.
3.3
GENERAL PURPOSE OUTPUTS
Up to six General Purpose Outputs are available on the device, depending on configuration. The output
state is configured using the GPO register. The output is dependent on the state of the MODE and ENBL
signals. The p1gpo bits determine the output when MODE is low and p2gpo when MODE is high. The
device can be configured so that the output remains active when the device is enabled only or always
according to the state of the gate bit; if the gate bit is not set the outputs will go high impedance when the
device is disabled.
All of the GPOs have multiple functions depending on the configuration of the device, this is discussed
further below.
3.3.1
Serial Bus Control
Setting the sipin bit in the SDI_CTRL register to one allows the device to be controlled by the enbl, mode
and reset bits in the SDI_CTRL register. When the sipin bit is set the MODE and ENBL pins become
available as GPO5 and GPO6.
3.3.2
MultiSlice Operation
It is possible to control up to four chips from a single three-wire bus. If the addr bit in the SDI_CTRL register
is set GPO1 and GPO2 are configured as inputs and their state is read by the chip and used to determine
the value of address bits A5 and A6. From the point at which the addr bit is set, until the chip is reset or
the bit cleared, the chip must be written or read using its extended six bit address.
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
8 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
3.3.3
Frequency Modulation Input
If the modsetup bits in the EXT_MOD register are set to 11 then GPO3 is configured as an input and
controls the modulation of the carrier. When high the frequency set in the FMOD and EXT_MOD registers is
added to the synthesizer frequency, if it is low the frequency is subtracted.
3.3.4
Lock Detect Output
If the lock bit in the GPO register is set the lock flag is sent to GPO4 where it is available to control an LED
or similar. If the lock bit and the 4wire bit are both set the lock signal is sent to GPO4 when the device is
enabled and the data when the device is disabled.
3.3.5
Four-Wire Bus Operation
If the 4wire bit in the SDI_CTRL register is set the device is configured as a four-wire bus with the data
output from as read operation being diverted to GPO4 instead of the SDATA pin. If the lock bit and the
4wire bit are both set the lock signal is sent to GPO4 when the device is enabled and the data when the
device is disabled.
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
9 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
4. REGISTER MAP
# Reg name
00
LF
01
XO
02 CAL_TIME
03 VCO_CTRL
04
CT_CAL1
05
CT_CAL2
06 PLL_CAL1
07 PLL_CAL2
08 VCO_AUTO
09 PLL_CTRL
0A PLL_BIAS
0B MIX_CONT
0C P1_FREQ1
0D P1_FREQ2
0E P1_FREQ3
0F P2_FREQ1
10 P2_FREQ2
11 P2_FREQ3
12
FN_CTRL
13 EXT_MOD
14
FMOD
15 SDI_CTRL
16
GPO
17
T_VCO
18
IQMOD1
19
IQMOD2
1A
IQMOD3
1B
IQMOD4
1C
T_CTRL
1D DEV_CTRL
1E
TEST
1F READBACK
readsel=0000
readsel=0001
readsel=0010
readsel=0011
readsel=0100
readsel=0101
readsel=0110
readsel=0111
readsel=other
15
14
13
12
lfact
11
10
9
8
7
6
p2cpdef
xoch
xoc
wait
xocf
ctavg
ctpol
4
3
2
1
n/a
clkpl
0
pllcpl
suwait
tct
xtvco
5
p1cpdef
kvavg
tkv1
kvrng kvpol
p1ctgain
p1ctv
p1ct
p2ctgain
p2ctv
p2ct
xoi1
tkv2
xoi2
xoi3
refst
icpup
n/a
p1ctdef
p2ctdef
p1kv
p1dn
p1kvgain
p1sgn
n/a
p2kv
p2dn
p2kvgain
p2sgn
n/a
aloi
plldy
auto
ctmax
divby
clkdiv
n/a
ctmin
pllst
tvco
p1loi
fulld
p1vcoi
p1mixidd
lden
n/a
ldlev
n/a
relok
p2loi
p2mixidd
p2vcoi
n/a
p1n
p1lodiv
p1presc
p1vcosel
p2presc
p2vcosel
p1nmsb
p1nlsb
n/a
p2n
p2lodiv
p2nmsb
p2nlsb
fnz
dithr
sdm
modsetup
n/a
phaln
phsalngain
phsalndly
mode
modstep
dith
fm
dmode tzps
n/a
n/a
modulation
sipin
enbl
mode 4wire
addr
n/a
p2gpio
curve_def_vco1
ctrl
bbgm
p1gpio
curve_def_vco2
txlo
mod
modiv
curve_def_vco3
modbias
bbatten
bufdacq
moddacq
fc_en
filt_ctrl
rsmst
tmux
tsel
calon calnul calblk divbias
calatten
bufdaci
readsel
ten
lobias
rctune
tbl_sel
mod
dacen
lock
rsmstopst
cpu
lfsrp
bufdc
modbuf
n/a
bufbias1
ref_sel ext_filt ldo_by v_test
lfsr
n/a
gate
n/a
moddaci
tc_en
reset
bufbias2
n/a
cpd
lfsrgatetime
dac
ctclk
bypas
n/a
lfsrt
rgbyp rcbyp
n/a
readback (depends on setting of DEV_CTRL:readsel)
dev_id
lock
rev_id
ct_cal
cp_cal
ctfail
v0_cal
rsm_state
0
v1_cal
f_errflag
0
vco_count_l
vco_count_h
calfbi calfbq
vco_sel
0x0000
vco_tc_curve
0x000
0x0000
Not all registers are active in every device in this series of parts.
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
10 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
4.1
REGISTER CONTENT DESCRIPTION
4.1.1
LF - Loop Filter Configuration (00h)
Field Name
lfact
p2cpdef
Bit Field
15
14:9
p1cpdef
8:3
pllcpl
2:0
4.1.2
XO - Crystal Oscillator Configuration (01h)
Field Name
xoch
xoc
xocf
suwait
4.1.3
Bit Field
15
14:11
10
9:0
Function
XO additional fixed capacitance
XO coarse tune
XO additional fixed capacitance
XO settling timer: 1LSB=128 reference clocks or 2.46μs
at 52MHz
CAL_TIME - Calibration Timing (02h)
Field Name
wait
tct
n/a
tkv1
tkv2
Function
active loop filter enable, 1=active 0=passive
Charge pump setting. If p2_kv_en=1 this value sets
charge pump current during KV compensation
measurement. If p2_kv_en=0, this value is used at all
times. Default value is 93μA.
Charge pump setting. if p1_kv_en=1 this value sets
charge pump current during KV compensation
measurement. If p1_kv_en=0, this value is used at all
times. Default value is 93μA.
charge pump leakage settings
Bit Field
15
14:10
9:8
7:4
3:0
Function
If high then the RF sections are not enabled until the PLL
calibrations complete
Duration of CT acquisition
Timer for first KV settling
Timer for second KV settling
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
11 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
4.1.4
VCO_CTRL - Calibration Control (03h)
Field Name
xtvco
ctavg
Bit Field
15
14:13
ctpol
12
clkpl
11
kvavg
10:9
kvrng
8
kvpol
7
xoi1
xoi2
xoi3
refst
icpup
n/a
6
5
4
3
2:1
0
4.1.5
CT_CAL1 - Path 1 Coarse Tuning Calibration (04h)
Field Name
p1ctgain
p1ctv
p1ct
p1ctdef
4.1.6
Function
Enable external VCO
Number of samples averaged to compute final value
during CT Calibration: 0 = average 16 samples; 1 =
average 32 samples; 2 = average 64 samples; 3 =
average 128 samples
polarity of VCO coarse-tune word
0 = increasing ct_val increases vco freq
1 = increasing ct_val decreases vco freq
coarse tuning clock polarity 0 = in phase with
reference; 1 = antiphase with reference
Number of samples averaged to compute final value
during KV compensation: 0 = average 16 samples; 1 =
average 32 samples; 2 = average 64 samples; 3 =
average 128 samples
KV Range - Sets accuracy of Voltage measurement
during KV cal
VCO KV polarity:
0 = positive, VCO freq increases with increasing tuning
voltage
1 = negative, VCO freq decreases with increasing tuning
voltage
XO current setting 1
XO current setting 2
XO current setting 3
Reference oscillator standby mode
Override default charge pump-up settings
Bit Field
15:13
12:8
7
6:0
Function
Path 1 calibration loop gain. Each step changes gain by
a factor of 2.
Path 1 VCO tuning target voltage
VCO coarse tune enable, path 1 mode
VCO coarse tuning default value, path 1 mode
CT_CAL2 - Path 2 Coarse Tuning Calibration (05h)
Field Name
p2ctgain
p2ctv
p2ct
p2ctdef
Bit Field
15:13
12:8
7
6:0
Function
Path 2 calibration loop gain. Each step changes gain by
a factor of 2.
Path 2 VCO tuning target voltage
VCO coarse tune enable, path2 mode
VCO coarse tuning default value, path 2 mode
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
12 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
4.1.7
PLL_CAL1 - Path 1 PLL Calibration (06h)
Field Name
p1kv
p1dn
Bit Field
15
14:6
p1kvgain
p1sgn
5:3
2
n/a
1:0
4.1.8
PLL_CAL2 - Path 2 PLL Calibration (07h)
Field Name
p2kv
p2dn
Bit Field
15
14:6
p2kvgain
p2sgn
5:3
2
n/a
1:0
4.1.9
Function
VCO tuning gain calibration enable, path 1 mode
Change in N-divider value to give frequency step during
KV compensation measurement in path 1 mode.
Controls loop gain during KV compensation
Controls whether or not p1dn is added/subtracted in Path
1 mode. If 0 then subtract, otherwise add.
Function
VCO tuning gain calibration enable, path 2 mode
Change in N-divider value to give frequency step during
KV compensation measurement in path 2 mode
Controls loop gain during KV compensation.
Controls whether or not p2dn is added/subtracted in Path
2 mode. If 0 then subtract, otherwise add
VCO_AUTO - Auto VCO select control (08h)
Field Name
auto
Bit Field
15
ctmax
14:8
ctmin
7:1
n/a
Function
If high then the PLL state machine attempts to find the
the correct VCO needed to lock to the desired frequency
Maximum CT value for coarse tuning allowed. Used as
the jump over threshold in auto VCO select mode
Minimum CT value for coarse tuning allowed. Used as
the jump over threshold in auto VCO select mode
0
4.1.10 PLL_CTRL - PLL Control (09h)
Field Name
divby
clkdiv
pllst
tvco
lden
ldlev
relok
Bit Field
15
14:12
11
10:6
5
4
3
aloi
2
plldy
1:0
Function
Force reference divider to divide by 1
Reference divider divide value
PLL standby mode (if high the PLL is always on)
VCO warm-up time. warm-up time [s] = tvco * 1/[fref*256]
Enable lock detector circuitry
Modify lock range for lock detector
Self Clearing Bit. When this bit is set high it triggers a
relock of the PLL and then clears
If low, the LO path current is automatically determined
according to frequency. If high, the LO current is set
according to the value of p2loi or P1loi in PLL_BIAS
depending on mode
PLL reset delay
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
13 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
4.1.11 PLL_BIAS - PLL Bias Settings (0Ah)
Field Name
n/a
p1loi
p1vcoi
n/a
p2loi
p2vcoi
Bit Field
15
14:11
10:8
7
6:3
2:0
Function
LO path current setting, path 1 mode
Path 1 VCO bias setting : 000=Min Current, 111=Max
Current
LO path current setting, path 2 mode
Path 2 VCO bias setting : 000=Min Current, 111=Max
Current
4.1.12 MIX_CONT - Mixer Control (0Bh) [RFFC parts only]
Field Name
fulld
p1mixidd
p2mixidd
n/a
Bit Field
15
14:12
11:9
8:0
Function
Full duplex mode (dual mixer version only): 0 = half
duplex, either path1 or path2 is enabled according to
mode pin. 1 = full duplex, Path 1 and Path 2 are enabled.
Path 1 mixer current: 000=min current, 111=max current
Path 2 mixer current: 000=min current, 111=max current
4.1.13 P1_FREQ1 - Path 1 Frequency 1 (0Ch)
Field Name
p1n
p1lodiv
Bit Field
15:7
6:4
p1presc
3:2
p1vcosel
1:0
Function
Path 1 N-divider integer value
Path 1 LO path divider setting: divide by 2^n (i.e. divide
by 1 to divide by 32). 110 and 111 are reserved
Path 1 VCO PLL feedback path divider setting: 01 =
divide by 2, 10 = divide by 4 (00 and 11 are reserved)
Path 1 VCO band select: 00 = vco1, 01 = vco2, 10 =
vco3 (11 is reserved)
4.1.14 P1_FREQ2 - Path 1 Frequency 2 (0Dh)
Field Name
p1nmsb
Bit Field
15:0
Function
Path 1 N-divider numerator value, most significant 16 bits
4.1.15 P1_FREQ3 - Path 1 Frequency 3 (0Eh)
Field Name
p1nlsb
n/a
Bit Field
15:8
7:0
Function
Path 1 N divider numerator value, least significant 8 bits
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
14 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
4.1.16 P2_FREQ1 - Path 2 Frequency 1 (0Fh)
Field Name
p2n
p2lodiv
Bit Field
15:7
6:4
p2presc
3:2
p2vcosel
1:0
Function
Path 2 VCO divider integer value.
Path2 LO path divider setting: divide by 2^n (i.e. divide
by 1 to divide by 32). 110 and 111 are reserved
Path 2 VCO PLL feedback path divider setting: 01 =
divide by 2, 10 = divide by 4 (00 and 11 are reserved)
Path 2 VCO band select: 00 = vco1, 01 = vco2, 10 =
vco3 (11 is reserved)
4.1.17 P2_FREQ2 - Path 2 Frequency 2 (10h)
Field Name
p2nmsb
Bit Field
15:0
Function
Path 2 N divider numerator value, most significant 16 bits
4.1.18 P2_FREQ3 - Path 2 Frequency 3 (11h)
Field Name
p2nlsb
n/a
Bit Field
15:8
7:0
Function
Path 2 N divider numerator value, least significant 8 bits
4.1.19 FN_CTRL - Frac-N Control (12h)
Field Name
fnz
Bit Field
15
dithr
14
sdm
13:12
phaln
phsalngain
11
10:8
phsalndly
7:6
mode
dith
fm
dmode
5
4
3
2
tzps
n/a
1
0
Function
If programmed high the modulator to the fractional
dividers is disabled. Test mode.
If high then the target frequency (reference of freq_det) is
dither by the sigma delta
PLL sigma-delta modulator order: 00=first order
accumulator, 01=2nd order MASH 1-1, 10=3rd order
MASH 1-1-1 and 11=DSM modulator as defined by
mode, dith, fm and dmode fields
Enable zero phase start
Gain Setting for zero phase start (N counts/LSB):
000=1/32, 001=1/16, 010=1/8, 011=1/4, 100=1/2, 101=1,
110=2 and 111: 4
Controls amount of synchronization(delay) of the
BangBang PFD: 00=no synchronization, 01=1 cycle of
delay, 10=2 cycles of delay and 11=bang bang PFD is off
(no correction)
DSM Modulator: 0=3rd order, and 1=5th order
DSM modulator dither 1=dither enabled
DSM modulator FM modulation (dithering option)
DSM modulator dithering mode 0 = stronger dithering,
1=distributed modulation
Loop filter pre-charge for zero-phase start (experimental)
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
15 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
4.1.20 EXT_MOD - Frequency modulation control 1 (13h)
Field Name
modsetup
modstep
n/a
Bit Field
15:14
13:10
Function
Control how modulation is applied to frac-N:
00/10=modulation off, 01=modulation is analog, on every
update of modulation the frac-N responds by adding
value to frac-N and 11=modulation is binary when
modpin is high modulation is added to frac-N
Modulation scale factor. Modulation is multiplied by
2^modstep before being added to frac-N. Maximum
usable value is 8
9:0
4.1.21 FMOD - Frequency modulation control 2 (14h)
Field Name
modulation
Bit Field
15:0
Function
Frequency Deviation applied to frac-N, functionallity
determined by modstep and mod_setup
4.1.22 SDI_CTRL - SDI Control (15h)
Field Name
sipin
Bit Field
15
enbl
14
mode
13
4wire
12
addr
11
n/a
reset
n/a
10:2
1
0
Function
1=ENBL and MODE pins are ignored and become
available as GPO5 and GPO6
If sipin=1 this field will replace the functionality of the
ENBL pin
If sipin_ctrl=1 this field will replace the functionality of the
MODE pin
1=4-wire SDI, i.e. SDATA is unidirectional and
SDATA_out is routed to GPO4
1=GPIO1,GPIO2 are inputs that map the register map to
the address {GPO2,GPO1,SDI address}; this gives 4
possible addresses for the registers.
When this bit is taken high the part is reset
4.1.23 GPO - General Purpose Outputs (16h)
Field Name
p2gpo
p1gpo
Bit Field
15:9
8:2
gate
1
lock
0
Function
GPOs for Path 2, 1=high, 0 = low. The mode pin or SDI
field controls whether the value in p2gpo or p1gpo is
used.
GPOs for Path 1, 1=high, 0 = low. The mode pin or SDI
field controls whether the value in p2gpo or p1gpo is
used.
If low GPO's are ANDed with enable (forced to zero
when the enable is low, if high the GPO's are available
when enable is low
Sends LOCK flag to GPO4
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
16 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
4.1.24
T_VCO - Temperature Compensation VCO Curves (17h)
Field Name
curve_vco1
curve_vco2
curve_vco3
n/a
Bit Field
15:13
12:10
9:7
6:0
Function
VCO1 temperature compensation curve
VCO1 temperature compensation curve
VCO3 temperature compensation curve
4.1.25 IQMOD1 – Modulator Calibration (18h) [RFMD208x only]
Field Name
ctrl
modbias
lobias
calon
calnul
calblk
divbias
Bit Field
15:11
10:8
7:6
5
4
3
2
bufdc
1:0
Function
Individual circuit block power control
Modulator internal node DC bias
LO buffer bias current
Calibration enable
Isolates buffer and core during calibration
Reduces LO path gain, may be required at low LO
frequencies
Bias restoration in LO buffer
4.1.26 IQMOD2 – Modulator Control (19h) [RFMD208x only]
Field Name
bbatten
rctune
calatten
mod
modbuf
Bit Field
15:12
11:6
5:4
3:2
1:0
Function
Baseband attenuation [RFMD2080 only]
Input low pass filter bandwidth [RFMD2080 only]
Modulator attenuation during calibration
Modulator attenuation
Modulator buffer enable (usually the same as mod)
4.1.27 IQMOD3 - Modulator Buffer Control (1Ah) [RFMD2080 only]
Field Name
bufdaci
bufdacq
dacen
Bit Field
15:10
9:4
8
Function
I-channel buffer DC offset control
Q-channel buffer DC offset control
Enable DC offset control DACs
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
17 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
4.1.28 IQMOD4– Modulator Core Control (1Bh) [RFMD2080 only]
Field Name
moddaci
moddacq
bufbias1
bufbias2
4.1.29
Bit Field
15:10
11:6
5:4
3:2
Function
I-channel mixer core DC offset control
I-channel mixer core DC offset control
Buffer bias 1
Buffer bias 2
TEMPC_CTRL – Temperature compensation control (1Ch)
Field Name
tc_en
Bit Field
15:14
tbl_sel
13:12
fc_en
filtr_ctrl
11
10:9
ref_sel
8
ext_filt
7
ldo_by
6
v_test
5
Function
Temp comp enable and mode
2'b00: disable temp comp
2'b01: enable closed loop temp comp
2'b10: enable open loop temp comp - manual mode
2'b11: enable open loop temp comp - automatic mode
Temp comp table selection
2'b00: table 0
2'b01: table 1
2'b10: table 2
2'b11: table 3
Temp comp fast charge (0=enabled, 1=disabled)
Temp comp filter control
2'b0x: filter state automatically controlled
2'b10: filter always connected
2'b11: filter always bypassed
Reference selection for closed loop mode (0=fixed,
1=variable)
External filter cap option (0=no external cap, 1=external
cap connected)
Temp comp voltage regulator control (0=regulator
engaged, 1=regulator bypassed)
Temp comp test mode (0=disabled 1=enabled)
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
18 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
4.1.30 DEV_CTRL - Readback register and RSM Control (1Dh)
Field Name
readsel
rsmst
Bit Field
15:12
11
rsmstopst
10:6
cpu
5
cpd
4
dac
ctclk
3
2
bypas
1
n/a
0
Function
Controls what is readback through the READBACK
register:
0000 > dev_id,mrev_id
0001 > lock,ct_cal,cp_cal,ct_failed
0010 > v0_cal,v1_cal
0011 > rsm_state,freqerrflag
0100 > vco_count_l[15:0]
0101 > vco_count_h[31:16]
0110 > cal_fbi,cal_fbq
0111 > vco_sel, tc_curve
other > 0
When this bit is high the PLL state machine stops in the
state rsmstopstate
This field defines the state we stop the state machine in
when rsmst=1
Charge pump to pump up: 0=normal operation, 1=pump
up
Charge pump to pump down: 0=normal operation,
1=pump down
DAC test
1=ct_clk is forced to always on, 0=clock turns on/off with
state machine
If high, offsets mixer so that LO signal can be viewed at
mixer output
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
19 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
4.1.31 TEST - Test register (1Eh)
Field Name
ten
tmux
tsel
lfsr
lfsrp
Bit Field
15
14:12
11:10
9
8
lfsrgatet
7:4
lfsrt
3
rgbyp
rcbyp
lfsrd
2
1
0
Function
Enables test mode
Test mux
Test mode, when high LFSR sclk is forced to always on
and lfsr is enabled, when low it turns on/off with state
machine
When high the phase (polarity) of lfsr_sclk is inverted
relative to fr_clk
This sets the duration of the LFSR test timer (for
production test), the number of fr_clk
cycles=2^(10+lfsr_test_gate_time) (2^10 to 2^26 cycles).
Intended for production test it could be used as a very
accurate, but slow, lock detect
Self Clearing Bit. When this bit is set high LFSR
BIST/Frequency Counter runs, and is self cleared when
complete
Internal regulator bypass 1=bypassed
VCO Bias RC filter bypass 1=bypassed
LFSR detect mode
4.1.32 READBACK – Readback Register (1Fh)
Field Name
Bit Field
dev_id
mrev_id
15:3
2:0
lock
ct_cal
cp_cal
ctfail
15
14:8
7:2
1
v0_cal
v1_cal
15:8
7:0
rsm_state
f_errflag
15:11
10:9
vco_count_l
15:0
vco_count_h
15:0
Function
DEV_CTRL:readsel=0000
Device identification
Chip revision
DEV_CTRL: readsel=0001
Synthesizer lock bit, can be routed to GPO4
Course tune calibration value
KV calibration charge pump current value
Coarse tune calibration flag (1=CT cal failed)
DEV_CTRL: readsel=0010
Min tuning voltage during cal
Max tuning voltage during cal
DEV_CTRL: readsel=0011
State machine operating state
Flag indicating incorrect frequency
DEV_CTRL: readsel=0100
DEV_CTRL: readsel=0101
cal_fbi
cal_fbq
15
14
vco_sel
vco_tc_curve
15:14
13:11
DEV_CTRL: readsel=0110 [RFMD208x only]
I-channel DC offset calibration complete flag
Q-channel DC offset calibration complete flag
DEV_CTRL:readsel=0111
Selected VCO
Selected temperature compensation curve
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
20 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
4.2
#
DEFAULT REGISTER SETTINGS
Reg name
Revision 1
Revision 2
00 LF
0xBEFA
0xBEFA
01 XO
0x4064
0x4064
02 CAL_TIME
0x9055
0x9055
03 VCO_CTRL
0x2D02
0x2D02
04 CT_CAL1
0xB0BF
0xACBF
05 CT_CAL2
0xB0BF
0xACBF
06 PLL_CAL1
0x0028
0x0028
07 PLL_CAL2
0x0028
0x0028
08 VCO_AUTO
0xFC06
0xFF00
09 PLL_CTRL
0x8220
0x8220
0A PLL_BIAS
0x0202
0x0202
0B MIX_CONT
0x4800
0x4800
0C P1_FREQ1
0x2324
0x1A94
0D P1_FREQ2
0x6276
0xD89D
0E P1_FREQ3
0x2700
0x8900
0F P2_FREQ1
0x2F16
0x1E84
10 P2_FREQ2
0x3B13
0x89D8
11 P2_FREQ3
0xB100
0x9D00
12 FN_CTRL
0x2A80
0x2A80
13 EXT_MOD
0x0000
0x0000
14 FMOD
0x0000
0x0000
15 SDI_CTRL
0x0000
0x0000
16 GPO
0x0000
0x0000
n/a
0x4900
18 IQMOD1
0x0283
0x0281
19 IQMOD2
0xF00F
0xF00F
1A IQMOD3
0x0000
0x0000
1B IQMOD4
0x000F
0x0005
1C T_CTRL
n/a
0xC840
1D DEV_CTRL
0x1000
0x1000
1E TEST
0x0001
0x0005
17 T_VCO
Revision 1 devices (mrev_id = 001): RFFC2071/2072/5071/5072, RFMD2080/2081
Revision 2 devices (mrev_id = 010): RFFC2071A/2072A/5071A/5072A
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
21 of 22
Integrated Synthesizer/Mixer/Modulator
Family Register Map Description
5. REFERENCES
1. RFMD company web site (http://www.rfmd.com)
2. RFMD Integrated Synthesizer and Mixer web site (http://rfmd.com/products/IntSynthMixer/)
3. Integrated Synthesizer/Mixer Evaluation Board and GUI User Guide
4. Integrated Synthesizer/Mixer Programming Guide
5. Integrated Synthesizer and Modulator web site (http://www.rfmd.com/products/IntSynthModulator/)
6. IQ Modulator Programming Guide (RFMD2080/2081)
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc.
120712
7628 Thorndike Road, Greensboro, NC27409-9421.·For sales or technical support, contact RFMD at (+1) 336-678-5570 or
[email protected]
22 of 22