BATTERY CHARGER & SYSTEMS PBCBAT Series 1 5 0 - 3 0 0 W AT T S - A C / D C S I N G L E O U T P U T FEATURES • • • • • PFC function, PF>0.98@115Vac; >0.95@230Vac Universal AC input / full range. Approval: ETS/EMC/CE. 100% full load burn-in test. Protections: overload/ over voltage/ short circuit. SPECIFICATIONS INPUT MODEL NUMBER OUTPUT1 RIPPLE NOISE EFFI POWER 11.2A 100mV 80% 150W Voltage 85-264VAC Frequency 47-63Hz. PBC-150-13.5-SC Inrush current Cold start, 20A/115V, 40A/230V. PBC-150-27-SC 27V 5.6A 150mV 83% 150W Input leakage current < 0.7mA /230VAC. PBC-200-13.5-SC 13.5V 14.9A 100mV 80% 200W Isolation I/P – O/P: 3KVAC / 1min I/P – F/G: 1.5KVAC / 1min O/P – F/G: 0.5KVAC/ 1min PBC-300-13.5-SC 13.5V 21.0A 100mV 83% 300W 27V 11.0A 100mV 86% 300W PBC-300-27-SC 13.5V OUTPUT Voltage See table. Current See table. Line regulation (full load) ± 0.5%. Load regulation 0.5% Voltage adjustment ± 10%. Overload protection 110% to 130%. Overvoltage protection 115% to 150%. Rise time 50ms @ full load (typical). Hold up time 20ms @ full load (typical). ENVIRONMENTAL Operating temperature -10°C to 50°C. Storage temperature -20°C to 85°C. Operating humidity 20% - 93% RH, non-condensing. Storage humidity 20% - 95% RH, non-condensing. GENERAL MTBF 100,000 hours. Cooling Force air cooled. STANDARDS 31 Safety Meet GB4943, UL60950, EN60950 EMC standards Meet GB9254, EN55022 Class B, EN61000-3-2-3, EN61000-4-2,3,4,5,6,8,11 C-Tick AS/NZS CISPR11 Group 1, Class A Doc. No. PBRC Rev.F 4-6-2013 PBCBAT Series TECHNICAL ILLUSTRATIONS 150W 200W BATTERY CHARGER & SYSTEMS 1 5 0 - 3 0 0 W AT T S - A C / D C S I N G L E O U T P U T 300W Doc. No. PBRC Rev.F 4-6-2013 Powering Progress – www.powerbox.com.au 32