LMD101S THRU LMD107S SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * * * * Surge overload rating - 30 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Polarity symbols molded on body Mounting position: Any Weight: 0.5 gram LMDS MECHANICAL DATA R 0.25˄˅ 0.15˄˅ 0. 2( .0 08 ) o Ratings at 25 C ambient temperature unless otherwise specified. 6 (.236) 5(.197) 4.4(.173) 3.7(.146) 3.3(.130) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 5.6˄˅ 5.3(.209) 4.7(.185) 0.6(.024) * Epoxy: Device has UL flammability classification 94V-O * UL listed under the recognized component directory, file #E94233. 1.3˄˅ 1.1˄˅ resistive or inductive load. Dimensions in millimeters and (inches) o MAXIMUM RATINGS (At TA = 25 C unless otherwise noted) LMD102S LMD103S LMD104S Maximum Recurrent Peak Reverse Voltage SYMBOL LMD101S VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 RATINGS Maximum Average Forward Output Current at T A = 40 oC Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Typical Current Squarad Time LMD105S LMD106S LMD107S UNITS 1.0 Amps I FSM 30 Amps I2t 3.7 A2/Sec RθJA 85 0 R θ?J L 20 0 T J, T STG -55 to + 150 Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range Volts IO C/W C/W 0 C o ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) SYMBOL CHARACTERISTICS Maximum Forward Voltage Drop per Bridge VF Element at 1.0A DC o Maximum Reverse Current at Rated @T A = 25 C DC Blocking Voltage per element @T A = 125 o C Note: 1.”Fully ROHS compliant”,”100% Sn plating(Pb-free). 2. Thermal Resistance: PCB mounted. IR LMD101S LMD102S LMD103S LMD104S LMD105S 1.0 LMD106S LMD107S UNITS Volts 1.0 uAmps 0.05 mAmps 2016-02 REV: A 60 8.3mS Single Half Sine-Wave JEDEC Method 50 40 30 20 10 0 1 2 4 20 10 6 40 60 100 INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( LMD101S THRU LMD107S ) 10 1 0.1 T J = 25 OC Pulse Width = 300mS 1% Duty Cycle 0.01 0 NUMBER OF CYCLES AT 60Hz 1.0 1.5 2.0 2.5 FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1.5 1000 TA = 125 OC AVERAGE FORWARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 100 10 TA = 25 OC 1.0 0.1 0 0.5 INSTANTANEOUS FORWARD VOLTAGE, (V) 20 40 60 80 100 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 TYPICAL REVERSE CHARACTERISTICS 1.0 0.5 60 Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 120 140 150 AMBIENT TEMPERATURE, (OC) FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.