FR601 RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION FR607 FAST RECOVERY RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 6.0 Amperes FEATURES * * * * * * Fast switching Low leakage Low forward voltage drop High current capability High currenf surge High reliability R-6 MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 2.08 grams 1.0 (25.4) MIN. .052 (1.3) DIA. .048 (1.2) .360 (9.1) .340 (8.6) .360 (9.1) DIA. .340 (8.6) 1.0 (25.4) MIN. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) SYMBOL FR601 FR602 FR603 FR604 FR605 FR606 FR607 UNITS Maximum Recurrent Peak Reverse Voltage RATINGS VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 50 70 100 140 200 280 400 420 600 560 800 700 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 75 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range VDC Volts IO 6.0 Amps I FSM 300 Amps CJ 150 T J , T STG -55 to + 150 pF 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 6.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage TA = 25 oC Maximum Full Load Reverse Current Average, Full Cycle .375” (9.5mm) lead length at T L = 55 oC Maximum Reverse Recovery Time (Note 1) NOTES : 1. Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A 2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts SYMBOL VF FR601 FR602 FR603 FR604 1.3 FR605 FR606 FR607 10 UNITS Volts uAmps IR 150 trr 150 uAmps 250 500 nSec 2002-11 FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 8 6 4 Single Phase Half Wave 60Hz Resistive or Inductive Load 2 FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( FR601 THRU FR607 ) 600 8.3ms Single Half Sine-Wave (JEDED Method) 500 400 300 200 100 0 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE, ( ) 1 175 10 50 NUMBER OF CYCLES AT 60Hz 100 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD FIG. 4 - TYPICAL JUNCTION CAPACITANCE 200 500 100 40 10 TJ = 25 Pulse Width=300uS 1% Duty Cycle 1 100 JUNCTION CAPACITANCE, (pF) INSTANTANEOUS FORWARD CURRENT, (A) CHARACTERISTICS 1000 60 40 20 10 TJ = 25 6 4 2 0 1 .6 .8 1.0 1.2 1.4 1.6 1.8 .1 2.0 .2 INSTANTANEOUS FORWARD VOLTAGE, (V) .4 1.0 2 4 10 20 REVERSE VOLTAGE, ( V ) FIG. 5 - TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 50 NONINDUCTIVE 10 NONINDUCTIVE trr +0.5A (+) 25 Vdc (approx) (-) (-) D.U.T PULSE GENERATOR (NOTE 2) 1 NONINDUCTIVE OSCILLOSCOPE (NOTE 1) 0 -0.25A (+) -1.0A NOTES:1 Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF. 2. Rise Time = 10ns max. Source Impedance = 50 ohms. 1cm SET TIME BASE FOR 50/100 ns/cm RECTRON 40 100