bav19ws-bav21ws.pdf

RECTRON
BAV19WS
BAV20WS
BAV21WS
SEMICONDUCTOR
TECHNICAL SPECIFICATION
SMALL SIGNAL DIODE
VOLTAGE RANGE 120 to 250 Volts CURRENT 200 mAmpere
FEATURES
* Fast Switching Speed
* Surface Mount Package Ideally Suited for
Automatic Insertion
* For General Purpose Switching Applications
SOD-323
MECHANICAL DATA
Case: Molded plastic
Epoxy: UL 94V-O rate flame retardant
Lead: MIL-STD-202E method 208C guaranteed
Mounting position: Any
Weight: 0.004 grams
.071(1.80)
.063(1.60)
.006(.15)
.014(.35)
.010(.25)
.055(1.40)
.047(1.20)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
.106(2.70)
.098(2.50)
.003(.08)
*
*
*
*
*
MAX.039(1.00)
Ratings at 25 OC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
REF .019(0.46)
.004(.10)
.000(.00)
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@T A =25 OC unless otherwise noted)
SYMBOL
VRM
VRRM
VRWM
VR
VRMS
RATINGS
Non-Repetitive Peak Reverse Voltage
Maximum Repetitive Peak Reverse Voltage
Maximum Working Peak reverse Voltage
Maximum DC Blocking Voltage
RMS Reverse Voltage
Forward Comtinuous Current
Average Rectified Output Current
@t<1.0mS
@t<1.0S
Peak Forward Surge Current
Repetitive Peak Forward Current
Reverse Recovery Time(I F=I R=30mA I rr =0.1XI R,R L=100W)
BAV19WS
BAV20WS
BAV21WS
120
200
250
UNITS
Volts
Volts
100
150
200
71
106
141
Volts
IFM
IO
400
mAmps
200
mAmps
IFSM
2.5
0.5
Amps
IFRM
T rr
625
mAmps
nS
50
Capacitance between terminals (V R=0V,f=1MHz)
CT
5
pF
Power Dissipation
PD
200
mW
TSTG
-65 to + 150
Storage Temperature Range
C
O
ELECTRICAL CHARACTERISTICS (@T A =25 OC unless otherwise noted)
CHARACTERISTICS
Forward Voltage
@IF=0.1A
@IF=0.2A
SYMBOL
BAV19WS
BAV20WS
BAV21WS
UNITS
VF
1.0
1.25
Volts
IR
0.1
uAmps
@VR=100V (BAV19WS)
Reverse Current
@VR=150V (BAV20WS)
@VR=200V (BAV21WS)
Note 1: "Fully ROHS compliant", "100% Sn plating (Pb-free)".
2007-1
Pd, POWER DISSIPATION(mW)
300
250
200
150
100
50
0
0
25
50
75
100
125
150
IF, INSTANTANEOUS FORWARD CURRENT(A)
RATING AND CHARACTERISTICS CURVES ( BAV19WS/BAV20WS/BAV21WS )
1
0.1
TA =-40 OC
T A = 0 OC
0.01
TA = 25 OC
TA = 75 OC
TA = 75 OC
0.001
0
O
TA, AMBIENT TEMPERATURE( C)
1
TA = 75 OC
0.1
TA = 25 C
0.01
T A = 0 OC
O
0.001
TA = -40 OC
0.0001
0
50
100
150
0.8
1.0
1.2
1.4
4.0
CT,TOTAL CAPACITANCE(pF)
IR, INSTANTANEOUS REVERSE CURRENT(mA)
TA = 125 OC
0.6
Figure2 Typical Foward Characteristics
TA = 150 OC
10
0.4
VF, INSTANTANEOUS FORWARD VOLTAGE(V)
Figure1 Power Derating Curve
100
0.2
TA = 125 OC
200
VR,INSTANTANEOUS REVERSE VOLTAGE(V)
Figure3 Typical Reverse Characteristics
250
3.5
f= 1.0MHz
3.0
2.5
2.0
1.5
1.0
0.5
0
0
10
20
30
40
VR, REVERSE VOLTAGE(V)
Figure4 Typical Capacitance vs Reverse Voltage
RECTRON
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.
RECTRON
Similar pages