DC-AC INVERTER UNIT PS-DA0105-07(S) (3.5 W SINGLE OUTPUTS) (PRELIMINARY INFORMATION) DESCRIPTION : This low profile DC to AC Inverter is developed for single lamps. Optimized for ChiMei Display N121X5-L02 APPLICABLE LCD: 6.4 to 15 inches single lamp type Lamp Voltage 560 Vrms Lamp Current 6.2 mArms Lamp Start Up Voltage 1.300 Vrms (Vin : 12.0 Vdc) FEATURES : Remote ON/OFF Open Lamp Detection RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : LxWxH 0°C ~ +50°C -20°C ~ +85°C 95 %RH max 95 x 16 x 6,5mm Unit : mm Weight :7,6 (g) typ. Note: Please use plastic screw in case of a non-insulating mounting base! Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN2 Input side CN1: Pin No. Symbols Vin CN 1-1 GND CN 1-2 Vbr CN 1-3 GND CN 1-4 CN 1-5 Vrm t Qty. 1 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-0590 SM02B-BHSS-1-TB Note t=1m m Molex or equal JST or equal Output side CN2 Pin No. CN 2-1 CN 2-2 Ratings 9.0 ~ 15.0 Vdc Symbols Vhigh Vlow Ratings 560 Vrm s (6,2 m Arm s ) (GND) 0 ~ 5 Vdc 0 ~ 0.4 = OFF / 2.5 ~ Vin = ON Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 1.1.2, 30th August 2010 DC-AC INVERTER UNIT PS-DA0105-07(S) (3.5 W SINGLE OUTPUTS) (PRELIMINARY INFORMATION) ELECTRICAL CHARACTERISTICS : Conditions Parameters Symbols Output Current Output Current Input Current Frequency Open Circuit Voltage No load Shutdown Note 1 : Vin (V) Vbr(V) Iout Iout Iin F Vopen 12.0±1.2 12.0±0.6 12.0±1.2 12.0±1.2 12.0 Ts d 12.0±1.2 Unit Note 6.7 0.42 70 1.500 m Arm s % Adc kHz Vrm s Dut y 100 % - s ec witho ut lo ad Tu (°C) Min. Typ. Max. 5.0 0.0 5.0 5.0 5.0 0 0 0 0 0 5.3 50 1.100 6.2 23 0.33 60 1.300 5.0 0 ~ +50 - 1.0 ~ +50 ~ +50 ~ +50 ~ +50 ~ +50 Duty M in Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. TEST CIRCUIT : Vin 12.0 V Specification A F Iin 1000:1 PROBE F CN1-1 Vopen V ~ SW3 V CN2-1 CN1-2 CN1-3 Vbr 0 ~ 5 Vdc CL1 RL1 T1 CN2-2 SW4 A ~ SW 1 Operation of unit a Operation b Non operation Iout1 CN1-4 Vrmt 0.4 / 5 Vdc a V b SW1 CN1-5 Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 1.1.2, 30th August 2010