EVB-USB2534BC
Evaluation Board
User’s Guide
2013 Microchip Technology Inc.
DS50002237A
Note the following details of the code protection feature on Microchip devices:
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
•
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
•
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
•
Microchip is willing to work with the customer who is concerned about the integrity of their code.
•
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device applications and the like is provided only for your convenience and may be
superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE,
MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of
Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.
Trademarks
The Microchip name and logo, the Microchip logo, dsPIC, FlashFlex, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, PIC32
logo, rfPIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and
other countries.
FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MTP, SEEVAL and The Embedded Control Solutions Company are
registered trademarks of Microchip Technology Incorporated in the U.S.A.
Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries.
Analog-for-the-Digital Age, Application Maestro, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net,
dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, Mindi, MiWi, MPASM,
MPF, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit,
PICtail, REAL ICE, rfLAB, Select Mode, SQI, Serial Quad I/O, Total Endurance, TSHARC, UniWinDriver, WiperLock, ZENA and ZScale are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated in the U.S.A.
GestIC and ULPP are registered trademarks of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip
Technology Inc., in other countries.
A more complete list of registered trademarks and common law trademarks owned by Standard Microsystems Corporation (“SMSC”)
is available at: www.smsc.com. The absence of a trademark (name, logo, etc.) from the list does not constitute a waiver of any
intellectual property rights that SMSC has established in any of its trademarks.
All other trademarks mentioned herein are property of their respective companies.
© 2013, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved.
ISBN: 9781620777688
QUALITY MANAGEMENT SYSTEM
CERTIFIED BY DNV
== ISO/TS 16949 ==
DS50002237A-page 2
Microchip received ISO/TS-16949:2009 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
2013 Microchip Technology Inc.
EVB-USB2534BC Evaluation Board User’s Guide
Object of Declaration: EVB-USB2534BC Evaluation Board
2013 Microchip Technology Inc.
DS50002237A-page 3
EVB-USB2534BC Evaluation Board User’s Guide
NOTES:
2013 Microchip Technology Inc.
DS50002237A-page 4
EVB-USB2534BC
EVALUATION BOARD
USER’S GUIDE
Table of Contents
Preface ........................................................................................................................... 7
Introduction............................................................................................................ 7
Document Layout .................................................................................................. 7
Conventions Used in this Guide ............................................................................ 8
The Microchip Web Site ........................................................................................ 9
Development Systems Customer Change Notification Service ............................ 9
Customer Support ................................................................................................. 9
Document Revision History ................................................................................. 10
Chapter 1. Overview
1.1 Introduction ................................................................................................... 11
1.2 Features ....................................................................................................... 11
1.3 General Description ...................................................................................... 11
Chapter 2. Hardware Configuration
2.1 Hardware Description ................................................................................... 13
2.1.1 Port Assignment ........................................................................................ 13
2.1.2 USB2534 Configuration ............................................................................. 13
2.1.3 Powered State LED ................................................................................... 13
2.1.4 RESETn LED ............................................................................................ 13
2.1.5 Port Power LEDs ....................................................................................... 14
2.1.6 Suspend LED ............................................................................................ 14
2.1.7 Connector Description ............................................................................... 14
2.1.8 Layout Considerations ............................................................................... 14
Appendix A. EVB-USB2534BC Evaluation Board
A.1 Introduction .................................................................................................. 17
Appendix B. EVB-USB2534BC Evaluation Board Schematics
B.1 Introduction .................................................................................................. 19
Appendix C. Bill of Materials (BOM)
C.1 Introduction .................................................................................................. 22
Worldwide Sales and Service .................................................................................... 26
2013 Microchip Technology Inc.
DS50002237A-page 5
EVB-USB2534BC Evaluation Board User’s Guide
NOTES:
DS50002237A-page 6
2013 Microchip Technology Inc.
EVB-USB2534BC
EVALUATION BOARD
USER’S GUIDE
Preface
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB® IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
INTRODUCTION
This chapter contains general information that will be useful to know before using the
PIC18F1220/1320. Items discussed in this chapter include:
•
•
•
•
•
•
Document Layout
Conventions Used in this Guide
The Microchip Web Site
Development Systems Customer Change Notification Service
Customer Support
Document Revision History
DOCUMENT LAYOUT
This document describes how to use the EVB-USB2534BC Evaluation Board as a
development tool for the USB2534 4-port USB 2.0 hub with battery charging features.
The manual layout is as follows:
• Chapter 1. “Overview” – Shows a brief description of the EVB-USB2534BC
Evaluation Board
• Chapter 2. “Hardware Configuration” – Includes instructions on how to get
started with the EVB-USB2534BC Evaluation Board.
• Appendix A. “EVB-USB2534BC Evaluation Board” – This appendix shows the
EVB-USB2534BC Evaluation Board.
• Appendix B. “EVB-USB2534BC Evaluation Board Schematics” – This appendix shows the EVB-USB2534BC Evaluation Board schematics.
• Appendix C. “Bill of Materials (BOM)” – This appendix shows the
EVB-USB2534BC Evaluation Board Bill of Materials (BOM).
2013 Microchip Technology Inc.
DS50002237A-page 7
EVB-USB2534BC Evaluation Board User’s Guide
CONVENTIONS USED IN THIS GUIDE
This manual uses the following documentation conventions:
DOCUMENTATION CONVENTIONS
Description
Arial font:
Italic characters
Represents
Referenced books
Emphasized text
A window
A dialog
A menu selection
A field name in a window or
dialog
A menu path
MPLAB® IDE User’s Guide
...is the only compiler...
the Output window
the Settings dialog
select Enable Programmer
“Save project before build”
A dialog button
A tab
A number in verilog format,
where N is the total number of
digits, R is the radix and n is a
digit.
A key on the keyboard
Click OK
Click the Power tab
4‘b0010, 2‘hF1
Italic Courier New
Sample source code
Filenames
File paths
Keywords
Command-line options
Bit values
Constants
A variable argument
Square brackets [ ]
Optional arguments
Curly brackets and pipe
character: { | }
Ellipses...
Choice of mutually exclusive
arguments; an OR selection
Replaces repeated text
#define START
autoexec.bat
c:\mcc18\h
_asm, _endasm, static
-Opa+, -Opa0, 1
0xFF, ‘A’
file.o, where file can be
any valid filename
mcc18 [options] file
[options]
errorlevel {0|1}
Initial caps
Quotes
Underlined, italic text with
right angle bracket
Bold characters
N‘Rnnnn
Text in angle brackets < >
Courier New font:
Plain Courier New
Represents code supplied by
user
DS50002237A-page 8
Examples
File>Save
Press <Enter>, <F1>
var_name [,
var_name...]
void main (void)
{ ...
}
2013 Microchip Technology Inc.
Preface
THE MICROCHIP WEB SITE
Microchip provides online support via our web site at www.microchip.com. This web
site is used as a means to make files and information easily available to customers.
Accessible by using your favorite Internet browser, the web site contains the following
information:
• Product Support – Data sheets and errata, application notes and sample
programs, design resources, user’s guides and hardware support documents,
latest software releases and archived software
• General Technical Support – Frequently Asked Questions (FAQs), technical
support requests, online discussion groups, Microchip consultant program
member listing
• Business of Microchip – Product selector and ordering guides, latest Microchip
press releases, listing of seminars and events, listings of Microchip sales offices,
distributors and factory representatives
DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE
Microchip’s customer notification service helps keep customers current on Microchip
products. Subscribers will receive e-mail notification whenever there are changes,
updates, revisions or errata related to a specified product family or development tool
of interest.
To register, access the Microchip web site at www.microchip.com, click on Customer
Change Notification and follow the registration instructions.
The Development Systems product group categories are:
• Compilers – The latest information on Microchip C compilers, assemblers, linkers
and other language tools. These include all MPLAB C compilers; all MPLAB
assemblers (including MPASM assembler); all MPLAB linkers (including MPLINK
object linker); and all MPLAB librarians (including MPLIB object librarian).
• Emulators – The latest information on Microchip in-circuit emulators.This
includes the MPLAB REAL ICE and MPLAB ICE 2000 in-circuit emulators.
• In-Circuit Debuggers – The latest information on the Microchip in-circuit
debuggers. This includes MPLAB ICD 3 in-circuit debuggers and PICkit 3 debug
express.
• MPLAB IDE – The latest information on Microchip MPLAB IDE, the Windows
Integrated Development Environment for development systems tools. This list is
focused on the MPLAB IDE, MPLAB IDE Project Manager, MPLAB Editor and
MPLAB SIM simulator, as well as general editing and debugging features.
• Programmers – The latest information on Microchip programmers. These include
production programmers such as MPLAB REAL ICE in-circuit emulator, MPLAB
ICD 3 in-circuit debugger and MPLAB PM3 device programmers. Also included
are nonproduction development programmers such as PICSTART Plus and
PIC-kit 2 and 3.
CUSTOMER SUPPORT
Users of Microchip products can receive assistance through several channels:
•
•
•
•
Distributor or Representative
Local Sales Office
Field Application Engineer (FAE)
Technical Support
2013 Microchip Technology Inc.
DS50002237A-page 9
EVB-USB2534BC Evaluation Board User’s Guide
Customers should contact their distributor, representative or field application engineer
(FAE) for support. Local sales offices are also available to help customers. A listing of
sales offices and locations is included in the back of this document.
Technical support is available through the web site at:
http://www.microchip.com/support
DOCUMENT REVISION HISTORY
Revision A (October 2013)
• Initial Release of this Document.
DS50002237A-page 10
2013 Microchip Technology Inc.
EVB-USB2534BC
EVALUATION BOARD
USER’S GUIDE
Chapter 1. Overview
1.1
INTRODUCTION
The USB2534 is a low-power, full-featured and OEM configurable, High-Speed USB
2.0 compliant hub with four downstream ports, each capable of supporting battery
charging. The EVB-USB2534BC Evaluation Board demonstrates a stand-alone hub
application, advanced power saving options and configurable port assignments. See
1.2 “Features” for more information.
1.2
FEATURES
• 36-pin QFN RoHS compliant package
• Four USB 2.0 downstream hub ports with individual port power and overcurrent
sense (OCS)
• High-Speed (480 Mbps), Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps)
compatible
• USB Battery Charging is supported on all downstream USB ports up to 2A
• Multi-Transaction Translator (MTT) is enabled
• Supports internal default hub configuration. Optionally supports configuration from
external EEPROM
• Low-Cost, 4-Layer space saving design with two outer signal layers, a power
inner layer and a ground inner layer
• Individual port power control with LEDs for port power indication
• Self-Powered operation
• Operates from a single voltage (12.0 VDC, regulated) external power supply
• External supply provides up to 6A of 5.0 VDC for system use and USB
downstream power through an on board 5 VDC regulator
• On board MCP1725 3.3 VDC regulator provides power to the USB2534 circuits
and RESETn control
• LED indicator for “Suspend” hub state (optional)
• EMI suppression provided by selection of capacitors and inner power/ground
Printed Circuit Board (PCB) layers
• ESD component footprints provided (optional)
• Single crystal clock source
• Schematics, layout and bill of materials are available to minimize new product
development time
1.3
GENERAL DESCRIPTION
The EVB-USB2534BC is an evaluation and demonstration platform featuring the
USB2534 USB 2.0 hub on a 4-layer RoHS compliant Printed Circuit Board (PCB).
2013 Microchip Technology Inc.
DS50002237A-page 11
EVB-USB2534BC Evaluation Board User’s Guide
The EVB-USB2534BC is designed to demonstrate the unique features of this device
using a low-cost PCB implementation with individual port power control for the downstream USB 2.0 ports. All downstream USB 2.0 ports include a high current port power
controller to fully support USB battery charging as a high current walk-up port.
Note:
Do not exceed 6A total current consumption from 5 VDC.
The EVB-USB2534BC is designed to support internal default configuration settings
and an external I2C™ EEPROM (optional) for custom configured functionality. A
location is provided for an external I2C EEPROM device for configuration at U8
Figure 2-1 and Figure 2-2 show the top and bottom level silk screen and copper layers.
DS50002237A-page 12
2013 Microchip Technology Inc.
EVB-USB2534BC
EVALUATION BOARD
USER’S GUIDE
Chapter 2. Hardware Configuration
2.1
HARDWARE DESCRIPTION
The EVB-USB2534BC includes two on board regulators. The first generates 5 VDC
from an external 12 VDC regulated power supply. This supplies power to the
downstream USB ports and to the 3.3 VDC regulator. The second is an MCP1725,
which generates 3.3 VDC for the hub device circuitry and performs voltage supervisor
and RESETn functions. The USB2534 generates its own 1.2 VDC for internal use with
on-chip 1.2 VDC regulators. The internal 1.2 VDC regulator tied to the oscillator and
the PLL is turned off during suspend to minimize suspend current. Downstream port
power is distributed by four independent power switches at up to 2A per port. Upstream
and downstream port connectors have USB 2.0 compliant decoupling and a separate
shield ground.
Note:
2.1.1
Do not exceed 6A total current consumption from 5 VDC.
Port Assignment
Downstream ports are numbered 1 through 4. The USB2534 allows any or all of the
downstream ports to be configured for high current battery USB charging, and the
EVB-USB2534BC is designed to demonstrate this feature.
In the default configuration, battery charging can be independently configured for each
port with the Battery Charging Strapping header. Battery charging can also be
configured using an external configuration, as described below.
2.1.2
USB2534 Configuration
Default: The EVB-USB2534BC has been set up to support an internal default
configuration as determined by the state of the CFG_SEL1 and CFG_SEL0 pins
immediately after reset. The vendor ID, product ID, language ID, device ID and other
choices have been set using ROM code defaults.
EEPROM Option: The EVB-USB2534BC can load configuration from an external
two-wire, I2C EEPROM (U8). The EEPROM must be installed and the configuration
option resistors on the CFG_SEL1 and CFG_SEL0 pins changed to enable this option.
The EEPROM may be pre-programmed before installation, or programmed via the
USB Host. This option allows access to all USB2534 configuration registers and ID
strings, providing detailed functional analysis and exercise as desired. The
EVB-USB2534BC is compatible with I2C EEPROMs from several manufacturers. The
memory capacity must be at least 512 bytes.
2.1.3
Powered State LED
An optional LED (D5) indicates when +5 VDC and +3.3 VDC power is present.
2.1.4
RESETn LED
An optional LED (D7) indicates when the RESETn signal is driven low and the
USB2534 is held in the Reset state.
2013 Microchip Technology Inc.
DS50002237A-page 13
EVB-USB2534BC Evaluation Board User’s Guide
2.1.5
Port Power LEDs
D1, D2, D3 and D4 indicate when 5 VDC port power is available to the associated
downstream USB port(s).
2.1.6
Suspend LED
An optional LED (D6) indicates the active state of the hub.
2.1.7
Connector Description
The EVB-USB2534BC provides a set of standard USB style connectors, one of type B
for the upstream port and four of type A for downstream ports. Power is supplied via a
2.5 mm power jack. Table 2-1 lists all of the connectors. For more details on the pinout
of these connectors, please refer to the EVB-USB2534BC schematics.
TABLE 2-1:
CONNECTOR DESCRIPTION
Connector
Type
Description
J0
USB B
Upstream USB Port 0
J1
USB A
Downstream USB Port 1
J2
USB A
Downstream USB Port 2
J3
USB A
Downstream USB Port 3
J4
USB A
Downstream USB Port 4
J5
2x4 header
Battery Charging Strap Selector
J6
1x2 header (not populated)
Optional Ext. +12 VDC supply header
J7
1x2 header
External Reset Control
J8
Power Jack 2.5 mm
+12 VDC Regulated Power Supply
J10
1x2 header
I2C and SMBus Enable
J11, J12
1x2 headers
Configuration
J13
2x5 header
SMBus IF connection
2.1.8
Layout Considerations
The EVB-USB2534BC is designed on four PCB layers – two signal layers and two supply layers. The PCB layer stackup is shown in Table 2-2. All signals are routed on the
top and bottom layers, while the internal layers are ground and power. Note that the
differential signals from the USB2534 neatly fan out to match the upstream and
downstream port placement, thus simplifying routing of these critical signals.
TABLE 2-2:
PCB LAYER STACKS
Component Side
Solder Mask
Layer 1
1.9-2.8 mil, finished
Pre-preg
4.25 mil, +/- 0.25 mil FR-4
Layer 2 – GND
1.3 mil (nominal)
Core
~24 mil FR-4
Layer 3 – POWER
1.3 mil (nominal)
Pre-preg
4.25 mil, +/- 0.25 mil FR-4
Layer 4
1.9-2.8 mil, finished
Solder Mask
Solder Side
Component side top layer is shown in Figure 2-1 with silk screen information to identify
component locations.
DS50002237A-page 14
2013 Microchip Technology Inc.
FIGURE 2-1:
2013 Microchip Technology Inc.
EVB-USB2534BC TOP LAYER – COMPONENT SIDE
DS50002237A-page 15
EVB-USB2534BC Evaluation Board User’s Guide
FIGURE 2-2:
DS50002237A-page 16
EVB-USB2534BC BOTTOM LAYER – SOLDER SIDE
2013 Microchip Technology Inc.
EVB-USB2534BC
EVALUATION BOARD
USER’S GUIDE
Appendix A. EVB-USB2534BC Evaluation Board
A.1
INTRODUCTION
This appendix shows the EVB-USB2534BC Evaluation Board.
FIGURE A-1:
EVB-USB2534BC EVALUATION BOARD
2013 Microchip Technology Inc.
DS50002237A-page 17
NOTES:
DS50002237A-page 18
2013 Microchip Technology Inc.
EVB-USB2534BC
EVALUATION BOARD
USER’S GUIDE
Appendix B. EVB-USB2534BC Evaluation Board
Schematics
B.1
INTRODUCTION
This appendix shows the EVB-USB2534BC Evaluation Board schematics.
2013 Microchip Technology Inc.
DS50002237A-page 19
EVB-USB2534BC Evaluation Board User’s Guide
EVB-USB2534BC EVALUATION BOARD SCHEMATIC 1
DS50002237A-page 20
FIGURE B-1:
2013 Microchip Technology Inc.
NOTES:
DS50002237A-page 21
2013 Microchip Technology Inc.
EVB-USB2534BC
EVALUATION BOARD
USER’S GUIDE
Appendix C. Bill of Materials (BOM)
C.1
INTRODUCTION
This appendix shows the EVB-USB2534BC Evaluation Board Bill of Materials (BOM).
2013 Microchip Technology Inc.
DS50002237A-page 22
Item Qty
EVB-USB2534BC EVALUATION BOARD BILL OF MATERIALS
Qty
Populated
Reference Designator(s)
Description
Manufacturer
Manufacturer Part Number
Notes
1
1
1
Assembly
Assembly, BobbyBC (EVB-USB2534BC-01), Rev. B2
2
4
0
BR1,BR2,BR3,BR4
Diode, Bridge, Switching, 50V, 140mA,KCAC,
SOT-143
EVB-USB2534BC-01
3
15
15
C1,C2,C3,C4,C13,C14,C16,C18, Capacitor, 0.1uF, 25V, 10%, X5R, 0402
C19,C23,C27,C28,C30,C35,C41
4
4
0
C5,C6,C7,C8
Capacitor, 0.1uF, 25V, 10%, X5R, 0402
Murata
GRM155R61E104KA7D
5
4
4
C9,C10,C11,C12
Capacitor, Low ESR, 150uF, 6.3VDC, 20%,
Aluminum, Radial-SMT, 5mm x 5.7mm
Lelon
VZS151M0JTR-0506
6
2
2
C15,C21
Capacitor, 4.7uF, 6.3VDC, 20%, X5R, 0402
TDK
C1005X5R0J475M
7
1
0
C17
Capacitor, 0.1uF, 25V, 10%, X5R, 0402
Murata
GRM155R61E104KA7D
DNP
8
1
0
C20
Capacitor, 1.0uF, 10%, 6.3V, X5R, 0402
Murata
GRM155R60J105KE19D
DNP
Infineon Tech
BGX50A
Murata
GRM155R61E104KA7D
9
2
2
C22,C26
Capacitor, 6pF, 50V, +/-0.5pF, NPO, 0402
Murata
GRM1555C1H6R0DZ01D
10
3
3
C24,C31,C33
Capacitor, 4.7uF, 6.3VDC, 20%, X5R, 0603
Murata
GRM188R60J475KE19D
11
1
0
C25
Capacitor, Low ESR, 150uF, 6.3VDC, 20%,
Aluminum, Radial-SMT, 5mm x 5.7mm
Lelon
VZS151M0JTR-0506
12
3
3
C29,C38,C39
Capacitor, 1000pF, 50V, 10%, X7R, 0402
Murata
GRM155R71H102KA01D
13
1
1
C32
Capacitor, 10uF, 6.3VDC, 20%, X5R, 0603
Murata
GRM188R60J106ME47D
14
1
1
C34
Capacitor, 0.1uF, 25V, 10%, X5R, 0402
Murata
GRM155R61E104KA7D
2013 Microchip Technology Inc.
15
1
1
C36
Capacitor, 10uF, 25 VDC, 10%, 0805
Murata
GRM21BR61E106KA73L
16
1
0
C37
Capacitor, 1.0uF, 16VDC, 10%, X5R, 0603
Murata
GRM188R61C105KA93D
17
1
1
C40
Capacitor, 2.2uF, 6.3VDC, 10%, X5R, 0603
Murata
GRM185R60J225KE26D
18
4
4
D1,D2,D3,D4
LED, Green, 3mm, Diffused, 0.2" CL-vert, TH, Right
Angle
Lumex
SSF-LXH103GD
19
1
1
D5
LED, Red, 3mm, Diffused, 0.2" CL-vert, TH, Right
Angle
Lumex
SSF-LXH103ID
20
2
2
D6,D7
LED, Red, 0603
Stanley Electric
BR1111C-TR
21
1
0
FB1
Ferrite Bead, 220 Ohm, 2A, 0.05DCR, 0603
Murata
BLM18EG221SN1D
22
1
1
FB2
Ferrite Bead, 220 Ohm, 2A, 0.05DCR, 0603
Murata
BLM18EG221SN1D
23
1
1
J0
Receptacle, USB, Style B, Right Angle, Through-hole FCI
TE
61729-1011BLF
292304-1
ESD
ESD
DNP
EEPROM
DNP
DNP
EVB-USB2534BC Evaluation Board User’s Guide
DS50002237A-page 23
TABLE C-1:
2013 Microchip Technology Inc.
TABLE C-1:
Item Qty
EVB-USB2534BC EVALUATION BOARD BILL OF MATERIALS
Qty
Populated
Reference Designator(s)
Description
Manufacturer
Manufacturer Part Number
24
4
4
J1,J2,J3,J4
Receptacle, USB, Style A, Right Angle, Through-hole Assmann
TE
TE
AU-Y1005-R
292303-1
787616-1
25
1
1
J5
Header, 2 x 4, 0.1 Inch, Vertical (cut from 2x36)
67996-272HLF
FCI
Notes
Cut from 2x36
strip
1
0
J6
Header, 1 x 2, 0.1 Inch, Vertical
Samtec
TSW-102-14-L-S
DNP
27
1
1
J7
Header, 1 x 2, 0.1 Inch, Vertical (cut from 1x36)
FCI
68000-236HLF
Cut from 1x36
strip
28
1
1
J8
Connector, Power Jack, 2.5 mm x 5.5 mm, 12 V, 4 A,
Right Angle, TH
Cui Stack
PJ-002BH
29
1
1
<J10,J11,J12>
Header, 2 x 3, 0.1 Inch, Vertical (cut from 2x36)
FCI
67996-272HLF
Cut from 2x36
strip
30
1
1
J13
Header, 2 x 5, 0.1 Inch, Vertical (cut from 2x36)
FCI
67996-272HLF
Cut from 2x36
strip (SMBus)
31
4
0
L1,L2,L3,L4
Inductor, Common Mode Choke, DLP11SN900SL2,
0504
Murata
DLP11SN900SL2
ESD
32
1
1
PCB Fab
PCB, BobbyBC (EVB-USB2534BC-01), Rev. B
EVB-USB2534BC-01
Supplied by
SMSC
33
10
10
R1,R2,R3,R4,R5,R6,R7,R8,R20, Resistor, 330, 5%, 1/16W, 0603
R36
Panasonic
ERJ-3GEYJ331V
34
4
0
R9,R10,R11,R12
Resistor, 1K, 5%, 1/16W, 0603
Panasonic
ERJ-3GEYJ102V
35
6
6
R13,R14,R15,R17,R18,R26
Resistor, 10K, 5%, 1/16W, 0603
Panasonic
ERJ-3GEYJ103V
Disch
DS50002237A-page 24
36
1
1
R16
Resistor, 12.0K, 1%, 1/16W, 0603
Panasonic
ERJ-3EKF1202V
37
1
0
R19
Resistor, 1Meg, 5%, 1/16W, 0603
Panasonic
ERJ-3GEYJ105V
DNP
38
3
3
R21,R25,R35
Resistor, 10K, 5%, 1/16W, 0603
Panasonic
ERJ-3GEYJ103V
EEPROM
39
1
1
R22
Resistor, 21.0K, 1%, 1/16W, 0603
Yageo America
9C06031A2102FKHFT
40
1
1
R23
Resistor, 150K, 1%, 1/10W, 0603
Panasonic
ERJ-3EKF1503V
41
3
3
R24,R29,R31
Resistor, 100K, 5%, 1/16W, 0603
Panasonic
ERJ-3GEYJ104V
42
2
2
R27,R37
Resistor, 1K, 5%, 1/16W, 0603
Panasonic
ERJ-3GEYJ102V
43
3
3
R28,R30,R33
Resistor, 100K, 5%, 1/16W, 0603
Panasonic
ERJ-3GEYJ104V
44
1
1
R32
Resistor, 255, 1%, 1/10W, 0603
Panasonic
ERJ-3EKF2550V
45
1
1
R34
Resistor, 82K, 5%, 1/16W, 0603
Panasonic
ERJ-3GEYJ823V
46
7
0
SHUNT1-SHUNT7
Shunt, Insulated, 0.1 Inch
AMP
881545-2
IntDflt
DNP
EVB-USB2534BC Evaluation Board User’s Guide
26
Item Qty
EVB-USB2534BC EVALUATION BOARD BILL OF MATERIALS
Qty
Populated
Reference Designator(s)
Description
Manufacturer
Manufacturer Part Number
47
1
1
SKT1
Socket, IC, 8 Pin DIP, Leaf Contacts, Through Hole
Assmann
A08-LC-TT-R
48
1
1
SW1
Switch, Momentary, SPST, 100mA, J-lead, NO
E-Switch
Panasonic
TL3301AF160QJ
EVQ-Q2P02W
49
1
1
U0
IC, USB2534-A1_QFN36, 4 Port USB 2.0 Hub w/
Battery Chg, QFN36
SMSC
USB2534-A1_QFN36
Notes
Place at U8
(EEPROM)
Supplied by
SMSC
50
4
4
U1,U2,U3,U4
IC, AP2111SG-13, Power Distribution Switch, SOP-8
Diodes Inc.
AP2111SG-13
51
1
1
U6
IC, MCP1725-ADJE/SN, LDO Regulator, Adj., 500
mA, SOIC8
Microchip
Technology
MCP1725-ADJE/SN
52
1
1
U7
IC, DC-DC Converter Module, 0.591-6 Vout, ~12 Vin,
0.591-6 VDC out, 6A, 5 pin SIP, 0.41" Wide
Murata
OKR-T/6-W12-C
53
1
0
U8
IC, 24C04, 2 Wire Serial EPROM, 4Kb, 2.7V, DIP-8
Microchip
Technology
24LC04B-I/P
54
1
1
U9
IC, 74LVC1G14, Inverter, Shottky, DCK
TI
SN74LVC1G14DCKR
55
1
1
Y1
Crystal, 24.000MHz, 30ppm, 6pF, SMT 2.0MM X
1.6MM
Murata
XRCGB24M000F3M00R0
56
1
1
-none
Foot, Silicone Rubber, Adhesive, Clear,
Hemispherical, .38"x.150"
3M
Bumper Specialties
Richco
SJ-5306
BS-12
RBS-12
57
1
1
-none
Assembly Label, "EVB-USB2534BC-01_B2"
ASSEMBLER
Place in white
Assy # box on
TOP side
58
1
1
-none
Serial Number Labels
ASSEMBLER
Place in white
Serial # box on
TOP side
EEPROM
Place near each
board corner
EVB-USB2534BC Evaluation Board User’s Guide
DS50002237A-page 25
TABLE C-1:
2013 Microchip Technology Inc.
Worldwide Sales and Service
AMERICAS
ASIA/PACIFIC
ASIA/PACIFIC
EUROPE
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://www.microchip.com/
support
Web Address:
www.microchip.com
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Harbour City, Kowloon
Hong Kong
Tel: 852-2401-1200
Fax: 852-2401-3431
India - Bangalore
Tel: 91-80-3090-4444
Fax: 91-80-3090-4123
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Austin, TX
Tel: 512-257-3370
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Cleveland
Independence, OH
Tel: 216-447-0464
Fax: 216-447-0643
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Novi, MI
Tel: 248-848-4000
Houston, TX
Tel: 281-894-5983
Indianapolis
Noblesville, IN
Tel: 317-773-8323
Fax: 317-773-5453
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
New York, NY
Tel: 631-435-6000
San Jose, CA
Tel: 408-735-9110
Canada - Toronto
Tel: 905-673-0699
Fax: 905-673-6509
DS50002237A-page 26
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
China - Beijing
Tel: 86-10-8569-7000
Fax: 86-10-8528-2104
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
China - Chongqing
Tel: 86-23-8980-9588
Fax: 86-23-8980-9500
China - Hangzhou
Tel: 86-571-2819-3187
Fax: 86-571-2819-3189
China - Hong Kong SAR
Tel: 852-2943-5100
Fax: 852-2401-3431
China - Nanjing
Tel: 86-25-8473-2460
Fax: 86-25-8473-2470
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
China - Shenzhen
Tel: 86-755-8864-2200
Fax: 86-755-8203-1760
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
China - Xian
Tel: 86-29-8833-7252
Fax: 86-29-8833-7256
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11-4160-8632
India - Pune
Tel: 91-20-3019-1500
Japan - Osaka
Tel: 81-6-6152-7160
Fax: 81-6-6152-9310
Japan - Tokyo
Tel: 81-3-6880- 3770
Fax: 81-3-6880-3771
Korea - Daegu
Tel: 82-53-744-4301
Fax: 82-53-744-4302
Korea - Seoul
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
Germany - Dusseldorf
Tel: 49-2129-3766400
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Germany - Pforzheim
Tel: 49-7231-424750
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Italy - Venice
Tel: 39-049-7625286
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Fax: 60-3-6201-9859
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Malaysia - Penang
Tel: 60-4-227-8870
Fax: 60-4-227-4068
Poland - Warsaw
Tel: 48-22-3325737
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
Taiwan - Hsin Chu
Tel: 886-3-5778-366
Fax: 886-3-5770-955
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
Sweden - Stockholm
Tel: 46-8-5090-4654
UK - Wokingham
Tel: 44-118-921-5800
Fax: 44-118-921-5820
Taiwan - Kaohsiung
Tel: 886-7-213-7830
Taiwan - Taipei
Tel: 886-2-2508-8600
Fax: 886-2-2508-0102
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
China - Xiamen
Tel: 86-592-2388138
Fax: 86-592-2388130
China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049
10/28/13
2013 Microchip Technology Inc.