TG Series Featuring an attractive, high-gloss finish, the TG enclosure series is manufactured from highquality plastics, with a choice of ABS or Polycarbonate for unsurpassed industrial quality. These high quality materials are impact and flame resistant as well as being halogen free. Rated to protection class IP 67, they are not only dustproof but also reliably protect installed electrical or electronic equipment against ingress of water during short-term submersion. The TG series therefore satisfies the most demanding applications and provides sure protection in harsh industrial environments even for highly sensitive electronics. 46 • • • • • • • • • • 16 sizes available IP67 (NEMA TYPE 4X) ABS or Polycarbonate Gray or transparent covers Smooth Sidewalls Stainless Steel cover screws (choice of standard screws or 1/4 turn quick release screws) Integral cover retainers Integral mounting studs in base Recessed cover for label inlays or membrane keypads Flame resistant and halogen free Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 47 TG88-6 – ABS and Polycarbonate – 84 x 82 x 55 mm (3.31 x 3.23 x 2.17 in.) Standard Features • Protection Level: • Technical: IP67 (NEMA 4X) Smooth Sidewalls Gray or Transparent Cover Standard or Quick Turn Screws 60 x 58 x 0.4 mm Recess in Cover Integrated Cover Retainer • UL Recognized Enclosure Materials: ABS or Polycarbonate • Transparent Cover Material: Polycarbonate Polyurethane Light Gray • Gasket Material: • Color: • Material Temperature Range: • Accessories: ABS -40˚C to 80˚C (-40˚F to 176˚F) Polycarbonate -40˚C to 120˚C (-40˚F to 248˚F) See section below E208470 Polycarbonate with standard screws Only TG Ordering Information Cat. No. w/ Standard Screws Cat. No. w/ Quick Turn Screws Type Length Dimensions mm (in) Width Height Std. Pk. 100-403-91 101-003-91 100-403-01 101-003-01 TGABS88-6-o TGABS88-6-to 84 mm (3.31 in.) 84 mm (3.31 in.) 82 mm (3.23 in.) 82 mm (3.23 in.) 55 mm (2.17 in.) 55 mm (2.17 in.) 1 1 200-403-91 201-003-91 200-403-01 201-003-01 TGPC88-6-o TGPC88-6-to 84 mm (3.31 in.) 84 mm (3.31 in.) 82 mm (3.23 in.) 82 mm (3.23 in.) 55 mm (2.17 in.) 55 mm (2.17 in.) 1 1 ABS Gray cover Transparent cover Polycarbonate Gray cover Transparent cover Accessories Ordering Information Cat. No. Type Std. Pk. Mounting Plate (plastic) 186-003 TGMPI-88 1 Mounting Plate (steel) 187-003 TGMPS-88 1 DIN Rail – TS35-68 198-068 NS35-68 1 DIN Rail - TS15-68 197-069 TS15-68 1 Mounting Tab Kit 182-002 TGABL 1 Please refer to pages 149-152 additional accessories and detailed information 43.5 mm (1.71 in) 58 mm (2.28 in) 70 mm (2.76 in) 48 39.7 mm (1.56 in) Ø4.2 mm (0.17 in) Ø7.2 mm (0.28 in) 7 mm (0.28 in) 50 mm (1.97 in) 58 mm (2.28 in) 82 mm (3.23 in) 75.4 mm (2.97 in) 37.4 mm (1.47 in) 84 mm (3.31 in) 77.4 mm (3.05 in) 55.4 mm (2.16 in) 4 mm (0.16 in) 40 mm (1.57 in) 55 mm (2.17 in) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com TG88-9 – ABS and Polycarbonate – 84 x 82 x 85 mm (3.31 x 3.23 x 3.35 in.) Standard Features • Protection Level: • Technical: IP67 (NEMA 4X) Smooth Sidewalls Gray or Transparent Cover Standard or Quick Turn Screws 60 x 58 x 0.4 mm Recess in Cover Integrated Cover Retainer • UL Recognized Enclosure Materials: ABS or Polycarbonate • Transparent Cover Material: Polycarbonate Polyurethane Light Gray • Gasket Material: • Color: • Material Temperature Range: • Accessories: ABS -40˚C to 80˚C (-40˚F to 176˚F) Polycarbonate -40˚C to 120˚C (-40˚F to 248˚F) See section below E208470 Polycarbonate with standard screws Only TG Ordering Information Cat. No. w/ Standard Screws Cat. No. w/ Quick Turn Screws Type Length Dimensions mm (in) Width Height Std. Pk. 100-903-91 101-503-91 100-903-01 101-503-01 TGABS88-9-o TGABS88-9-to 84 mm (3.31 in.) 84 mm (3.31 in.) 82 mm (3.23 in.) 82 mm (3.23 in.) 85 mm (3.35 in.) 85 mm (3.35 in.) 1 1 200-903-91 201-503-91 200-903-01 201-503-01 TGPC88-9-o TGPC88-9-to 84 mm (3.31 in.) 84 mm (3.31 in.) 82 mm (3.23 in.) 82 mm (3.23 in.) 85 mm (3.35 in.) 85 mm (3.35 in.) 1 1 ABS Gray cover Transparent cover Polycarbonate Gray cover Transparent cover Accessories Ordering Information Cat. No. Type Std. Pk. Mounting Plate (plastic) 186-003 TGMPI-88 1 Mounting Plate (steel) 187-003 TGMPS-88 1 DIN Rail – TS35-68 198-068 NS35-68 1 DIN Rail - TS15-68 197-069 TS15-68 1 Mounting Tab Kit 182-002 TGABL 1 Please refer to pages 149-152 additional accessories and detailed information 43.5 mm (1.71 in) 58 mm (2.28 in) 70 mm (2.76 in) 69.7 mm (2.74 in) Ø4.2 mm (0.17 in) Ø7.2 mm (0.28 in) 7 mm (0.28 in) 50 mm (1.97 in) 58 mm (2.28 in) 82 mm (3.23 in) 74.8 mm (2.94 in) 36.8 mm (1.45 in) 84 mm (3.31 in) 76.8 mm (3.02 in) 54.8 mm (2.16 in) 4 mm (0.16 in) 70 mm (2.76 in) 85 mm (3.35 in) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 49 TG1208-6 – ABS and Polycarbonate – 122 x 82 x 55 mm (4.80 x 3.23 x 2.17 in.) Standard Features • Protection Level: • Technical: IP67 (NEMA 4X) Smooth Sidewalls Gray or Transparent Cover Standard or Quick Turn Screws 98 x 58 x 0.4 mm Recess in Cover Integrated Cover Retainer • UL Recognized Enclosure Materials: ABS or Polycarbonate • Transparent Cover Material: Polycarbonate Polyurethane Light Gray • Gasket Material: • Color: • Material Temperature Range: • Accessories: ABS -40˚C to 80˚C (-40˚F to 176˚F) Polycarbonate -40˚C to 120˚C (-40˚F to 248˚F) See section below E208470 Polycarbonate with standard screws Only TG Ordering Information Cat. No. w/ Standard Screws Cat. No. w/ Quick Turn Screws Type Length Dimensions mm (in) Width Height Std. Pk. 100-404-91 101-004-91 100-404-01 101-004-01 TGABS1208-6-o TGABS1208-6-to 122 mm (4.80 in.) 122 mm (4.80 in.) 82 mm (3.23 in.) 82 mm (3.23 in.) 55 mm (2.17 in.) 55 mm (2.17 in.) 1 1 200-404-91 201-004-91 200-404-01 201-004-01 TGPC1208-6-o TGPC1208-6-to 122 mm (4.80 in.) 122 mm (4.80 in.) 82 mm (3.23 in.) 82 mm (3.23 in.) 55 mm (2.17 in.) 55 mm (2.17 in.) 1 1 ABS Gray cover Transparent cover Polycarbonate Gray cover Transparent cover Accessories Ordering Information Cat. No. Type Std. Pk. Mounting Plate (plastic) 186-004 TGMPI-1208 1 Mounting Plate (steel) 187-004 TGMPS-1208 1 DIN Rail – TS35-106 198-107 NS35-106/2 1 DIN Rail - TS15-106 197-107 TS15-106/2 1 Mounting Tab Kit 182-002 TGABL 1 Please refer to pages 149-152 additional accessories and detailed information 81.5 mm (3.21 in) 96 mm (3.78 in) 108 mm (4.25 in) 50 39.7 mm (1.56 in) 4 mm (0.02 in) Ø4.2 mm (0.17 in) Ø7.2 mm (0.28 in) 58 mm (2.28 in) 7 mm (0.28 in) 50 mm (1.97 in) 82 mm (3.23 in) 75.4 mm (2.97 in) 37.4 mm (1.47 in) 122 mm (4.80 in) 115.4 mm (4.54 in) 93.4 mm (3.68 in) 40 mm (1.57 in) 40 mm (1.57 in) 55 mm (2.17 in) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com TG1208-9 – ABS and Polycarbonate – 122 x 82 x 85 mm (4.80 x 3.23 x 3.35 in.) Standard Features • Protection Level: • Technical: IP67 (NEMA 4X) Smooth Sidewalls Gray or Transparent Cover Standard or Quick Turn Screws 98 x 58 x 0.4 mm Recess in Cover Integrated Cover Retainer • UL Recognized Enclosure Materials: ABS or Polycarbonate • Transparent Cover Material: Polycarbonate Polyurethane Light Gray • Gasket Material: • Color: • Material Temperature Range: • Accessories: ABS -40˚C to 80˚C (-40˚F to 176˚F) Polycarbonate -40˚C to 120˚C (-40˚F to 248˚F) See section below E208470 Polycarbonate with standard screws Only TG Ordering Information Cat. No. w/ Standard Screws Cat. No. w/ Quick Turn Screws Type Length Dimensions mm (in) Width Height Std. Pk. 100-904-91 101-504-91 100-904-01 101-504-01 TGABS1208-9-o TGABS1208-9-to 122 mm (4.80 in.) 122 mm (4.80 in.) 82 mm (3.23 in.) 82 mm (3.23 in.) 85 mm (3.35 in.) 85 mm (3.35 in.) 1 1 200-904-91 201-504-91 200-904-01 201-504-01 TGPC1208-9-o TGPC1208-9-to 122 mm (4.80 in.) 122 mm (4.80 in.) 82 mm (3.23 in.) 82 mm (3.23 in.) 85 mm (3.35 in.) 85 mm (3.35 in.) 1 1 ABS Gray cover Transparent cover Polycarbonate Gray cover Transparent cover Accessories Ordering Information Cat. No. Type Std. Pk. Mounting Plate (plastic) 186-004 TGMPI-1208 1 Mounting Plate (steel) 187-004 TGMPS-1208 1 DIN Rail – TS35-106 198-107 NS35-106/2 1 DIN Rail - TS15-106 197-107 TS15-106/2 1 Mounting Tab Kit 182-002 TGABL 1 Please refer to pages 149-152 additional accessories and detailed information 69.7 mm (2.74 in) 81.5 mm (3.21 in) 96 mm (3.78 in) 108 mm (4.25 in) 4 mm (0.02 in) Ø4.2 mm (0.17 in) Ø7.2 mm (0.28 in) 58 mm (2.28 in) 7 mm (0.28 in) 50 mm (1.97 in) 82 mm (3.23 in) 74.8 mm (2.94 in) 36.8 mm (1.45 in) 122 mm (4.80 in) 114.8 mm (4.52 in) 92.8 mm (3.65 in) 40 mm (1.57 in) 70 mm (2.76 in) 85 mm (3.35 in) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 51 TG1212-6 – ABS and Polycarbonate – 124 x 122 x 55 mm (4.88 x 4.80 x 2.17 in.) Standard Features • Protection Level: • Technical: IP67 (NEMA 4X) Smooth Sidewalls Gray or Transparent Cover Standard or Quick Turn Screws 97 x 95 x 0.4 mm Recess in Cover Integrated Cover Retainer • UL Recognized Enclosure Materials: ABS or Polycarbonate • Transparent Cover Material: Polycarbonate Polyurethane Light Gray • Gasket Material: • Color: • Material Temperature Range: • Accessories: ABS -40˚C to 80˚C (-40˚F to 176˚F) Polycarbonate -40˚C to 120˚C (-40˚F to 248˚F) See section below E208470 Polycarbonate with standard screws Only TG Ordering Information Cat. No. w/ Standard Screws Cat. No. w/ Quick Turn Screws Type Length Dimensions mm (in) Width 100-405-91 101-005-91 100-405-01 101-005-01 TGABS1212-6-o TGABS1212-6-to 124 mm (4.88 in.) 124 mm (4.88 in.) 122 mm (4.80 in.) 55 mm (2.17 in.) 122 mm (4.80 in.) 55 mm (2.17 in.) 1 1 200-405-91 201-005-91 200-405-01 201-005-01 TGPC1212-6-o TGPC1212-6-to 124 mm (4.88 in.) 124 mm (4.88 in.) 122 mm (4.80 in.) 55 mm (2.17 in.) 122 mm (4.80 in.) 55 mm (2.17 in.) 1 1 Height Std. Pk. ABS Gray cover Transparent cover Polycarbonate Gray cover Transparent cover Accessories Ordering Information Cat. No. Type Std. Pk. Mounting Plate (plastic) 186-005 TGMPI-1212 1 Mounting Plate (steel) 187-005 TGMPS-1212 1 DIN Rail – TS35-110 198-110 NS35-110 1 DIN Rail - TS15-110 197-110 TS15-110 1 Internal Hinge Kit Set (longside) 182-001 TGISS 1 Mounting Tab Kit 182-002 TGABL 1 Please refer to pages 149-152 additional accessories and detailed information 39.7 mm (1.56 in) 7 mm (0.28 in) 110 mm (4.33 in) Ø4.2 mm (0.17 in) Ø7.2 mm (0.28 in) 83.5 mm (3.29 in) 100 mm (3.94 in) 52 4 mm (0.02 in) 40 mm (1.57 in) 90 mm (3.54 in) 98 mm (3.86 in) 122 mm (4.80 in) 115.4 mm (4.54 in) 77.4 mm (3.05 in) 124 mm (4.88 in) 117.4 mm (4.62 in) 95.4 mm (3.76 in) 4 mm (0.16 in) 40 mm (1.57 in) 55 mm (2.17 in) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com TG1212-9 – ABS and Polycarbonate – 124 x 122 x 85 mm (4.88 x 4.80 x 3.35in.) Standard Features • Protection Level: • Technical: IP67 (NEMA 4X) Smooth Sidewalls Gray or Transparent Cover Standard or Quick Turn Screws 97 x 95 x 0.4 mm Recess in Cover Integrated Cover Retainer • UL Recognized Enclosure Materials: ABS or Polycarbonate • Transparent Cover Material: Polycarbonate Polyurethane Light Gray • Gasket Material: • Color: • Material Temperature Range: • Accessories: ABS -40˚C to 80˚C (-40˚F to 176˚F) Polycarbonate -40˚C to 120˚C (-40˚F to 248˚F) See section below E208470 Polycarbonate with standard screws Only TG Ordering Information Cat. No. w/ Standard Screws Cat. No. w/ Quick Turn Screws Type Length Dimensions mm (in) Width 100-905-91 101-505-91 100-905-01 101-505-01 TGABS1212-9-o TGABS1212-9-to 124 mm (4.88 in.) 124 mm (4.88 in.) 122 mm (4.80 in.) 85 mm (3.35 in.) 122 mm (4.80 in.) 85 mm (3.35 in.) 1 1 200-905-91 201-505-91 200-905-01 201-505-01 TGPC1212-9-o TGPC1212-9-to 124 mm (4.88 in.) 124 mm (4.88 in.) 122 mm (4.80 in.) 85 mm (3.35 in.) 122 mm (4.80 in.) 85 mm (3.35 in.) 1 1 Height Std. Pk. ABS Gray cover Transparent cover Polycarbonate Gray cover Transparent cover Accessories Ordering Information Cat. No. Type Std. Pk. Mounting Plate (plastic) 186-005 TGMPI-1212 1 Mounting Plate (steel) 187-005 TGMPS-1212 1 DIN Rail – TS35-110 198-110 NS35-110 1 DIN Rail - TS15-110 197-110 TS15-110 1 Internal Hinge Kit Set (longside) 182-001 TGISS 1 Mounting Tab Kit 182-002 TGABL 1 Please refer to pages 149-152 additional accessories and detailed information 69.7 mm (2.74 in) 7 mm (0.28 in) 4 mm (0.02 in) 83.5 mm (3.29 in) 100 mm (3.94 in) 110 mm (4.33 in) Ø4.2 mm (0.17 in) Ø7.2 mm (0.28 in) 40 mm (1.57 in) 90 mm (3.54 in) 98 mm (3.86 in) 122 mm (4.80 in) 114.8 mm (4.52 in) 76.8 mm (3.02 in) 124 mm (4.88 in) 116.8 mm (4.60 in) 94.8 mm (3.73 in) 4 mm (0.16 in) 70 mm (2.76 in) 85 mm (3.35 in) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 53 TG1608-6 – ABS and Polycarbonate – 162 x 82 x 55 mm (6.38 x 3.23 x 2.17 in.) Standard Features • Protection Level: • Technical: IP67 (NEMA 4X) Smooth Sidewalls Gray or Transparent Cover Standard or Quick Turn Screws 138 x 58 x 0.4 mm Recess in Cover Integrated Cover Retainer • UL Recognized Enclosure Materials: ABS or Polycarbonate • Transparent Cover Material: Polycarbonate Polyurethane Light Gray • Gasket Material: • Color: • Material Temperature Range: • Accessories: ABS -40˚C to 80˚C (-40˚F to 176˚F) Polycarbonate -40˚C to 120˚C (-40˚F to 248˚F) See section below E208470 Polycarbonate with standard screws Only TG Ordering Information Cat. No. w/ Standard Screws Cat. No. w/ Quick Turn Screws Type Length Dimensions mm (in) Width Height Std. Pk. 100-406-91 101-006-91 100-406-01 101-006-01 TGABS1608-6-o TGABS1608-6-to 162 mm (6.38 in.) 162 mm (6.38 in.) 82 mm (3.23 in.) 82 mm (3.23 in.) 55 mm (2.17 in.) 55 mm (2.17 in.) 1 1 200-406-91 201-006-91 200-406-01 201-006-01 TGPC1608-6-o TGPC1608-6-to 162 mm (6.38 in.) 162 mm (6.38 in.) 82 mm (3.23 in.) 82 mm (3.23 in.) 55 mm (2.17 in.) 55 mm (2.17 in.) 1 1 ABS Gray cover Transparent cover Polycarbonate Gray cover Transparent cover Accessories Ordering Information Cat. No. Type Std. Pk. Mounting Plate (plastic) 186-006 TGMPI-1608 1 Mounting Plate (steel) 187-006 TGMPS-1608 1 DIN Rail – TS35-146 198-146 NS35-146 1 DIN Rail - TS15-146 197-146 TS15-146 1 Mounting Tab Kit 182-002 TGABL 1 Please refer to pages 149-152 additional accessories and detailed information 162 mm (6.38 in) 155.4 mm (6.12 in) 133.4 mm (5.25 in) 121.5 mm (4.78 in) 136 mm (5.35 in) 148 mm (5.83 in) 54 39.7 mm (1.56 in) 4 mm (0.02 in) Ø7.2 mm (0.28 in) Ø4.2 mm (0.17 in) 7 mm (0.28 in) 50 mm (1.97 in) 58 mm (2.28 in) 75.4 mm (2.97 in) 37.4 mm (1.47 in) 82 mm (3.23 in) 60 mm (2.36 in) 4 mm (0.16 in) 40 mm (1.57 in) 55 mm (2.17 in) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com TG1608-9 – ABS and Polycarbonate – 162 x 82 x 85mm (6.38 x 3.23 x 3.35 in.) Standard Features • Protection Level: • Technical: IP67 (NEMA 4X) Smooth Sidewalls Gray or Transparent Cover Standard or Quick Turn Screws 138 x 58 x 0.4 mm Recess in Cover Integrated Cover Retainer • UL Recognized Enclosure Materials: ABS or Polycarbonate • Transparent Cover Material: Polycarbonate Polyurethane Light Gray • Gasket Material: • Color: • Material Temperature Range: • Accessories: ABS -40˚C to 80˚C (-40˚F to 176˚F) Polycarbonate -40˚C to 120˚C (-40˚F to 248˚F) See section below E208470 Polycarbonate with standard screws Only TG Ordering Information Cat. No. w/ Standard Screws Cat. No. w/ Quick Turn Screws Type Length Dimensions mm (in) Width Height Std. Pk. 100-906-91 101-506-91 100-906-01 101-506-01 TGABS1608-9-o TGABS1608-9-to 162 mm (6.38 in.) 162 mm (6.38 in.) 82 mm (3.23 in.) 82 mm (3.23 in.) 85 mm (3.35 in.) 85 mm (3.35 in.) 1 1 200-906-91 201-506-91 200-906-01 201-506-01 TGPC1608-9-o TGPC1608-9-to 162 mm (6.38 in.) 162 mm (6.38 in.) 82 mm (3.23 in.) 82 mm (3.23 in.) 85 mm (3.35 in.) 85 mm (3.35 in.) 1 1 ABS Gray cover Transparent cover Polycarbonate Gray cover Transparent cover Accessories Ordering Information Cat. No. Type Std. Pk. Mounting Plate (plastic) 186-006 TGMPI-1608 1 Mounting Plate (steel) 187-006 TGMPS-1608 1 DIN Rail – TS35-146 198-146 NS35-146 1 DIN Rail - TS15-146 197-146 TS15-146 1 Mounting Tab Kit 182-002 TGABL 1 Please refer to pages 149-152 additional accessories and detailed information 162 mm (6.38 in) 154.8 mm (6.09 in) 132.8 mm (5.23 in) 69.7 mm (2.74 in) 121.5 mm (4.78 in) 136 mm (5.35 in) 148 mm (5.83 in) 4 mm (0.02 in) Ø7.2 mm (0.28 in) Ø4.2 mm (0.17 in) 7 mm (0.28 in) 50 mm (1.97 in) 58 mm (2.28 in) 74.8 mm (2.94 in) 36.8 mm (1.45 in) 82 mm (3.23 in) 60 mm (2.36 in) 4 mm (0.16 in) 70 mm (2.76 in) 85 mm (3.35 in) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 55 TG1612-9 – ABS and Polycarbonate – 162 x 122 x 90 mm (6.38 x 4.80 x 3.54 in.) Standard Features • Protection Level: • Technical: IP67 (NEMA 4X) Smooth Sidewalls Gray or Transparent Cover Standard or Quick Turn Screws 135 x 95 x 0.4 mm Recess in Cover Integrated Cover Retainer • UL Recognized Enclosure Materials: ABS or Polycarbonate • Transparent Cover Material: Polycarbonate Polyurethane Light Gray • Gasket Material: • Color: • Material Temperature Range: • Accessories: ABS -40˚C to 80˚C (-40˚F to 176˚F) Polycarbonate -40˚C to 120˚C (-40˚F to 248˚F) See section below E254144 Polycarbonate with standard screws Only TG Ordering Information Cat. No. w/ Standard Screws Cat. No. w/ Quick Turn Screws Type Length Dimensions mm (in) Width 100-407-91 101-007-91 100-407-01 101-007-01 TGABS1612-6-o TGABS1612-6-to 162 mm (6.38 in.) 162 mm (6.38 in.) 122 mm (4.80 in.) 90 mm (3.54 in.) 122 mm (4.80 in.) 90 mm (3.54 in.) 1 1 200-407-91 201-007-91 200-407-01 201-007-01 TGPC1612-6-o TGPC1612-6-to 162 mm (6.38 in.) 162 mm (6.38 in.) 122 mm (4.80 in.) 90 mm (3.54 in.) 122 mm (4.80 in.) 90 mm (3.54 in.) 1 1 Height Std. Pk. ABS Gray cover Transparent cover Polycarbonate Gray cover Transparent cover Accessories Ordering Information Cat. No. Type Std. Pk. Mounting Plate (plastic) 186-007 TGMPI-1612 1 Mounting Plate (steel) 187-007 TGMPS-1612 1 DIN Rail – TS35-146 198-146 NS35-146 1 DIN Rail - TS15-146 197-146 TS15-146 1 Internal Hinge Kit Set (longside) 182-001 TGISS 1 Mounting Tab Kit 182-002 TGABL 1 Please refer to pages 149-152 additional accessories and detailed information 162 mm (6.38 in) 155 mm (6.10 in) 133 mm (5.24 in) 50 mm (1.97 in) 74.7 mm (2.94 in) 4 mm (0.02 in) Ø7.2 mm (0.28 in) Ø4.2 mm (0.17 in) 88 mm (3.46 in) 90.5 mm (3.56 in) 122 mm (4.80 in) 115 mm (4.53 in) 75 mm (2.95 in) 120 mm (4.72 in) 136 mm (5.35 in) 148 mm (5.83 in) 56 7 mm (0.28 in) 4 mm (0.16 in) 60 mm (2.36 in) 90 mm (3.54 in) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com TG2012-8 – ABS and Polycarbonate – 202 x 122 x 75 mm (7.95 x 4.80 x 2.95 in.) Standard Features • Protection Level: • Technical: IP67 (NEMA 4X) Smooth Sidewalls Gray or Transparent Cover Standard or Quick Turn Screws 175 x 95 x 0.4 mm Recess in Cover Integrated Cover Retainer • UL Recognized Enclosure Materials: ABS or Polycarbonate • Transparent Cover Material: Polycarbonate Polyurethane Light Gray • Gasket Material: • Color: • Material Temperature Range: ABS -40˚C to 80˚C (-40˚F to 176˚F) Polycarbonate -40˚C to 120˚C (-40˚F to 248˚F) See section below • Accessories: E254144 Polycarbonate with standard screws Only TG Ordering Information Cat. No. w/ Standard Screws Cat. No. w/ Quick Turn Screws Type Length Dimensions mm (in) Width 100-408-91 101-008-91 100-408-01 101-008-01 TGABS2012-8-o TGABS2012-8-to 202 mm (7.95 in.) 202 mm (7.95 in.) 122 mm (4.80 in.) 75 mm (2.95 in.) 122 mm (4.80 in.) 75 mm (2.95 in.) 1 1 200-408-91 201-008-91 200-408-01 201-008-01 TGPC2012-8-o TGPC2012-8-to 202 mm (7.95 in.) 202 mm (7.95 in.) 122 mm (4.80 in.) 75 mm (2.95 in.) 122 mm (4.80 in.) 75 mm (2.95 in.) 1 1 Height Std. Pk. ABS Gray cover Transparent cover Polycarbonate Gray cover Transparent cover Accessories Ordering Information Cat. No. Type Std. Pk. Mounting Plate (plastic) 186-008 TGMPI-2012 1 Mounting Plate (steel) 187-008 TGMPS-2012 1 DIN Rail – TS35-186 198-186 NS35-186 1 DIN Rail - TS15-186 197-186 TS15-186 1 Internal Hinge Kit Set (longside) 182-001 TGISS 1 Mounting Tab Kit 182-002 TGABL 1 Please refer to pages 149-152 additional accessories and detailed information 202 mm (7.95 in) 195.3 mm (7.69 in) 59.7 mm (2.35 in) 173.3 mm (6.82 in) 4 mm (0.16 in) 57.75 mm (2.27 in) 160.5 mm (6.32 in) 4 mm (0.02 in) Ø4.2 mm (0.17 in) 40 mm (1.57 in) 90.4 mm (3.56 in) 90 mm (3.54 in) 77.3 mm (3.04 in) 122 mm (4.80 in) 115.3 mm (4.54 in) Ø7.2 mm (0.28 in) 7 mm (0.28 in) 115.5 mm (4.55 in) 45 mm (1.77 in) 75 mm (2.95 in) 176 mm (6.93 in) 188 mm (7.40 in) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 57 TG2012-9 – ABS and Polycarbonate – 202 x 122 x 90 mm (7.95 x 4.80 x 3.54 in.) Standard Features • Protection Level: • Technical: IP67 (NEMA 4X) Smooth Sidewalls Gray or Transparent Cover Standard or Quick Turn Screws 175 x 95 x 0.4 mm Recess in Cover Integrated Cover Retainer • UL Recognized Enclosure Materials: ABS or Polycarbonate • Transparent Cover Material: Polycarbonate Polyurethane Light Gray • Gasket Material: • Color: • Material Temperature Range: • Accessories: ABS -40˚C to 80˚C (-40˚F to 176˚F) Polycarbonate -40˚C to 120˚C (-40˚F to 248˚F) See section below E254144 Polycarbonate with standard screws Only TG Ordering Information ABS Cat. No. w/ Standard Screws Cat. No. w/ Quick Turn Screws Type Length 100-908-91 101-508-91 100-908-01 101-508-01 TGABS2012-9-o TGABS2012-9-to 202 mm (7.95 in.) 202 mm (7.95 in.) 122 mm (4.80 in.) 90 mm (3.54 in.) 122 mm (4.80 in.) 90 mm (3.54 in.) 1 1 200-908-91 201-508-91 200-908-01 201-508-01 TGPC2012-9-o TGPC2012-9-to 202 mm (7.95 in.) 202 mm (7.95 in.) 122 mm (4.80 in.) 90 mm (3.54 in.) 122 mm (4.80 in.) 90 mm (3.54 in.) 1 1 Gray cover Transparent cover Dimensions mm (in) Width Height Std. Pk. Polycarbonate Gray cover Transparent cover Accessories Ordering Information Cat. No. Type Std. Pk. Mounting Plate (plastic) 186-008 TGMPI-2012 1 Mounting Plate (steel) 187-008 TGMPS-2012 1 DIN Rail – TS35-186 198-186 NS35-186 1 DIN Rail - TS15-186 197-186 TS15-186 1 Internal Hinge Kit Set (longside) 182-001 TGISS 1 Mounting Tab Kit 182-002 TGABL 1 Please refer to pages 149-152 additional accessories and detailed information 202 mm (7.95 in) 195 mm (7.68 in) 74.7 mm (2.94 in) 173 mm (6.81 in) 4 mm (0.02 in) Ø4.2 mm (0.17 in) 40 mm (1.57 in) 90.4 mm (3.56 in) 77 mm (3.03 in) 90 mm (3.54 in) 115 mm (4.53 in) 122 mm (4.80 in) 57.75 mm (2.27 in) Ø7.2 mm (0.28 in) 7 mm (0.28 in) 115.5 mm (4.55 in) 4 mm (0.16 in) 160.5 mm (6.32 in) 176 mm (6.93 in) 60 mm (2.36 in) 90 mm (3.54 in) 188 mm (7.40 in) 58 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com TG2015-9 – ABS and Polycarbonate – 202 x 152 x 90 mm (7.95 x 5.98 x 3.54 in.) Standard Features • Protection Level: • Technical: IP67 (NEMA 4X) Smooth Sidewalls Gray or Transparent Cover Standard or Quick Turn Screws 175 x 125 x 0.4 mm Recess in Cover Integrated Cover Retainer • UL Recognized Enclosure Materials: ABS or Polycarbonate • Transparent Cover Material: Polycarbonate Polyurethane Light Gray • Gasket Material: • Color: • Material Temperature Range: • Accessories: ABS -40˚C to 80˚C (-40˚F to 176˚F) Polycarbonate -40˚C to 120˚C (-40˚F to 248˚F) See section below E254144 Polycarbonate with standard screws Only TG Ordering Information Cat. No. w/ Standard Screws Cat. No. w/ Quick Turn Screws Type Length Dimensions mm (in) Width 100-409-91 101-009-91 100-409-01 101-009-01 TGABS2015-9-o TGABS2015-9-to 202 mm (7.95 in.) 202 mm (7.95 in.) 152 mm (5.98 in.) 90 mm (3.54 in.) 152 mm (5.98 in.) 90 mm (3.54 in.) 1 1 200-409-91 201-009-91 200-409-01 201-009-01 TGPC2015-9-o TGPC2015-9-to 202 mm (7.95 in.) 202 mm (7.95 in.) 152 mm (5.98 in.) 90 mm (3.54 in.) 152 mm (5.98 in.) 90 mm (3.54 in.) 1 1 Height Std. Pk. ABS Gray cover Transparent cover Polycarbonate Gray cover Transparent cover Accessories Ordering Information Cat. No. Type Std. Pk. Mounting Plate (plastic) 186-009 TGMPI-2015 1 Mounting Plate (steel) 187-009 TGMPS-2015 1 DIN Rail – TS35-170 198-170 NS35-170 1 DIN Rail - TS15-170 197-170 TS15-170 1 Internal Hinge Kit Set 182-001 TGISS 1 Mounting Tab Kit 182-002 TGABL 1 Please refer to pages 149-152 additional accessories and detailed information 202 mm (7.95 in) 195 mm (7.68 in) 2.94 mm 160 mm (6.30 in) 188 mm (7.40 in) n4.5 mm (0.18) 118 mm (4.65 in) 8.1 mm (0.32 in) 80 mm (3.15 in) 4 mm (0.02 in) 7 mm (0.28 in) 56 mm (2.20 in) 106 mm (4.17 in) 119 mm (4.69 in) 145 mm (5.71 in) 152 mm (5.98 in) 173 mm (6.81 in) 4 mm (0.16 in) 90 mm (3.54 in) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 59 TG2516-9 – ABS and Polycarbonate – 252 x 162 x 90 mm (9.92 x 6.38 x 3.54 in.) Standard Features • Protection Level: • Technical: IP67 (NEMA 4X) Smooth Sidewalls Gray or Transparent Cover Standard or Quick Turn Screws 225 x 135 x 0.4 mm Recess in Cover Integrated Cover Retainer • UL Recognized Enclosure Materials: ABS or Polycarbonate • Transparent Cover Material: Polycarbonate Polyurethane Light Gray • Gasket Material: • Color: • Material Temperature Range: • Accessories: ABS -40˚C to 80˚C (-40˚F to 176˚F) Polycarbonate -40˚C to 120˚C (-40˚F to 248˚F) See section below E254144 Polycarbonate with standard screws Only TG Ordering Information Cat. No. w/ Standard Screws Cat. No. w/ Quick Turn Screws Type Length Dimensions mm (in) Width 100-412-91 101-012-91 100-412-01 101-012-01 TGABS2516-9-o TGABS2516-9-to 252 mm (9.92 in.) 252 mm (9.92 in.) 162 mm (6.38 in.) 90 mm (3.54 in.) 162 mm (6.38 in.) 90 mm (3.54 in.) 1 1 200-412-91 201-012-91 200-412-01 201-012-01 TGPC2516-9-o TGPC2516-9-to 252 mm (9.92 in.) 252 mm (9.92 in.) 162 mm (6.38 in.) 90 mm (3.54 in.) 162 mm (6.38 in.) 90 mm (3.54 in.) 1 1 Height Std. Pk. ABS Gray cover Transparent cover Polycarbonate Gray cover Transparent cover Accessories Ordering Information Cat. No. Type Std. Pk. Mounting Plate (plastic) 186-012 TGMPI-2516 1 Mounting Plate (steel) 187-012 TGMPS-2516 1 DIN Rail – TS35-222 198-222 NS35-222 1 DIN Rail - TS15-222 197-222 TS15-222 1 Internal Hinge Kit Set 182-001 TGISS 1 Mounting Tab Kit 182-002 TGABL 1 Please refer to pages 149-152 additional accessories and detailed information 252 mm (9.92 in) 245 mm (9.65 in) 74.7 mm (2.94 in) 7 mm (0.28 in) Ø4.2 mm (0.17 in) Ø7.2 mm (0.28 in) 74 mm (2.91 in) 190.5 mm (7.50 in) 212 mm (8.35 in) 238 mm (9.37 in) 60 4 mm (0.02 in) 75 mm (2.95 in) 128 mm (5.04 in) 130 mm (5.12 in) 117 mm (4.61 in) 162 mm (6.38 in) 155 mm (6.10 in) 223 mm (8.78 in) 154 mm (6.06 in) 114 mm (4.49 in) 4 mm (0.16 in) 60 mm (2.36 in) 90 mm (3.54 in) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com TG2516-12 – ABS and Polycarbonate – 252 x 162 x 120 mm (9.92 x 6.38 x 4.72 in.) Standard Features • Protection Level: • Technical: IP67 (NEMA 4X) Smooth Sidewalls Gray or Transparent Cover Standard or Quick Turn Screws 225 x 135 x 0.4 mm Recess in Cover Integrated Cover Retainer • UL Recognized Enclosure Materials: ABS or Polycarbonate • Transparent Cover Material: Polycarbonate Polyurethane Light Gray • Gasket Material: • Color: • Material Temperature Range: • Accessories: ABS -40˚C to 80˚C (-40˚F to 176˚F) Polycarbonate -40˚C to 120˚C (-40˚F to 248˚F) See section below E254144 Polycarbonate with standard screws Only TG Ordering Information Cat. No. w/ Standard Screws Cat. No. w/ Quick Turn Screws Type Length Dimensions mm (in) Width 100-912-91 101-512-91 100-912-01 101-512-01 TGABS2516-12-o TGABS2516-12-to 252 mm (9.92 in.) 252 mm (9.92 in.) 162 mm (6.38 in.) 120 mm (4.72 in.) 162 mm (6.38 in.) 120 mm (4.72 in.) 1 1 200-912-91 201-512-91 200-912-01 201-512-01 TGPC2516-12-o TGPC2516-12-to 252 mm (9.92 in.) 252 mm (9.92 in.) 162 mm (6.38 in.) 120 mm (4.72 in.) 162 mm (6.38 in.) 120 mm (4.72 in.) 1 1 Height Std. Pk. ABS Gray cover Transparent cover Polycarbonate Gray cover Transparent cover Accessories Ordering Information Cat. No. Type Std. Pk. Mounting Plate (plastic) 186-012 TGMPI-2516 1 Mounting Plate (steel) 187-012 TGMPS-2516 1 DIN Rail – TS35-222 198-222 NS35-222 1 DIN Rail - TS15-222 197-222 TS15-222 1 Internal Hinge Kit Set 182-001 TGISS 1 Mounting Tab Kit 182-002 TGABL 1 Please refer to pages 149-152 additional accessories and detailed information 252 mm (9.92 in) 244.5 mm (9.63 in) 222.5 mm (8.76 in) 154 mm (6.06 in) 104.7 mm (4.12 in) 7 mm (0.28 in) 4 mm (0.02 in) Ø7.2 mm (0.28 in) Ø4.2 mm (0.17 in) 75 mm (2.95 in) 128 mm (5.04 in) 130 mm (5.12 in) 116.5 mm (4.59 in) 162 mm (6.38 in) 154.5 mm (6.08 in) 114 mm (4.49 in) 74 mm (2.91 in) 190.5 mm (7.50 in) 212 mm (8.35 in) 238 mm (9.37 in) 4 mm (0.16 in) 90 mm (3.54 in) 120 mm (4.72 in) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 61 TG3023-9 – ABS and Polycarbonate – 302 x 232 x 90 mm (11.89 x 9.13 x 3.54 in.) Standard Features • Protection Level: • Technical: IP67 (NEMA 4X) Smooth Sidewalls Gray or Transparent Cover Standard or Quick Turn Screws 275 x 205 x 0.4 mm Recess in Cover Integrated Cover Retainer • UL Recognized Enclosure Materials: ABS or Polycarbonate • Transparent Cover Material: Polycarbonate Polyurethane Light Gray • Gasket Material: • Color: • Material Temperature Range: • Accessories: ABS -40˚C to 80˚C (-40˚F to 176˚F) Polycarbonate -40˚C to 120˚C (-40˚F to 248˚F) See section below E254144 Polycarbonate with standard screws Only TG Ordering Information Cat. No. w/ Standard Screws Cat. No. w/ Quick Turn Screws Type Dimensions mm (in) Width 100-413-91 101-013-91 100-413-01 101-013-01 TGABS3023-9-o TGABS3023-9-to 302 mm (11.89 in.) 232 mm (9.13 in.) 90 mm (3.54 in.) 302 mm (11.89 in.) 232 mm (9.13 in.) 90 mm (3.54 in.) 1 1 200-413-91 201-013-91 200-413-01 201-013-01 TGPC3023-9-o TGPC3023-9-to 302 mm (11.89 in.) 232 mm (9.13 in.) 90 mm (3.54 in.) 302 mm (11.89 in.) 232 mm (9.13 in.) 90 mm (3.54 in.) 1 1 Length Height Std. Pk. ABS Gray cover Transparent cover Polycarbonate Gray cover Transparent cover Accessories Ordering Information Cat. No. Type Std. Pk. Mounting Plate (plastic) 186-013 TGMPI-3023 1 Mounting Plate (steel) 187-013 TGMPS-3023 1 DIN Rail – TS35-285 198-285 NS35-285 1 DIN Rail - TS15-285 197-285 TS15-285 1 Internal Hinge Kit Set 182-001 TGISS 1 Mounting Tab Kit 182-002 TGABL 1 Please refer to pages 149-152 additional accessories and detailed information 302 mm (11.89 in) 295 mm (11.61 in) 7 mm (0.28 in) 4 mm (0.02 in) Ø4.2 mm (0.17 in) Ø7.2 mm (0.28 in) 170 mm (6.69 in) 255 mm (10.04 in) 275.5 mm (10.85 in) 288 mm (11.34 in) 62 74.7 mm (2.94 in) 80 mm (3.15 in) 198 mm (7.80 in) 200 mm (7.87 in) 187 mm (7.36 in) 232 mm (9.13 in) 225 mm (8.86 in) 273 mm (10.75 in) 90 mm (3.54 in) 4 mm (0.16 in) 60 mm (3.15 in) 90 mm (3.54 in) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com TG3023-11 – ABS and Polycarbonate – 302 x 232 x 110 mm (11.89 x 9.13 x 4.33 in.) Standard Features • Protection Level: • Technical: IP67 (NEMA 4X) Smooth Sidewalls Gray or Transparent Cover Standard or Quick Turn Screws 275 x 205 x 0.4 mm Recess in Cover Integrated Cover Retainer • UL Recognized Enclosure Materials: ABS or Polycarbonate • Transparent Cover Material: Polycarbonate Polyurethane Light Gray • Gasket Material: • Color: • Material Temperature Range: • Accessories: ABS -40˚C to 80˚C (-40˚F to 176˚F) Polycarbonate -40˚C to 120˚C (-40˚F to 248˚F) See section below E254144 Polycarbonate with standard screws Only TG Ordering Information Cat. No. w/ Standard Screws Cat. No. w/ Quick Turn Screws Type Dimensions mm (in) Width 100-913-91 101-513-91 100-913-01 101-513-01 TGABS3023-11-o TGABS3023-11-to 302 mm (11.89 in.) 232 mm (9.13 in.) 110 mm (4.33 in.) 302 mm (11.89 in.) 232 mm (9.13 in.) 110 mm (4.33 in.) 1 1 200-913-91 201-513-91 200-913-01 201-513-01 TGPC3023-11-o TGPC3023-11-to 302 mm (11.89 in.) 232 mm (9.13 in.) 110 mm (4.33 in.) 302 mm (11.89 in.) 232 mm (9.13 in.) 110 mm (4.33 in.) 1 1 Length Height Std. Pk. ABS Gray cover Transparent cover Polycarbonate Gray cover Transparent cover Accessories Ordering Information Cat. No. Type Std. Pk. Mounting Plate (plastic) 186-013 TGMPI-3023 1 Mounting Plate (steel) 187-013 TGMPS-3023 1 DIN Rail – TS35-285 198-285 NS35-285 1 DIN Rail - TS15-285 197-285 TS15-285 1 Internal Hinge Kit Set 182-001 TGISS 1 Mounting Tab Kit 182-002 TGABL 1 Please refer to pages 149-152 additional accessories and detailed information 302 mm (11.89 in) 294.7 mm (11.60 in) 7 mm (0.28 in) 94.7 mm (3.73 in) 4 mm (0.02 in) 170 mm (6.69 in) 255 mm (10.04 in) 275.5 mm (10.85 in) 288 mm (11.34 in) Ø4.2 mm (0.17 in) Ø7.2 mm (0.28 in) 80 mm (3.15 in) 198 mm (7.80 in) 200 mm (7.87 in) 186.7 mm (7.35 in) 232 mm (9.13 in) 224.7 mm (8.85 in) 272.7 mm (10.74 in) 90 mm (3.54 in) 4 mm (0.16 in) 80 mm (3.15 in) 110 mm (4.33 in) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 63