Test Jacks 4 mm System Type Pin Diameter PART NO. / Housing color SEB 2630 S1,9 MW SEB 4mm panel mount safety Jack, touch proof, gold plated brass with soldering pin 1.9mm, max. panel thickness 6mm Installation tool for 4mm panel mount safety jacks. 4 mm 4 mm 973929000 972359100 972359101 972359102 972359103 972359104 972359105 972359106 972359107 972359109 972359188 Technical Data Contact Type jack Ø 4 mm – Connection Type solder pin 1.9mm AC/DC 1000 V CAT III – – – 24 A 5 mOhm screw thread M12 – – – Current Rating* Contact Resistance Mounting Type Material Specifications Jack Body gold plated brass – Contact Spring – – Housing Polyamide – Environmental Conditions Temperature Range -40°C to +80°C (-40 to 176°F) – Flamability Rating Housing UL 94 V-2 – SW 9 Drawing Measurements are shown in millimeters. Multiply by 0.03937 to convert to inches. 79 2,5 21 36 ø 1,9 M 12x0,75 ø 14,5 ø4 1,3 Ø15 179 * Please consider derating graph on page 80. 70 For the latest on Altech Test & Measurement specifications please visit www.altechcorp.com/test-equipment 2,9 Voltage Rating Measurement Category (IEC61010)