Test Jacks 4 mm System Type BIL 30 / BIL 30 Au BUG 10 / BUG 10 Au 4mm panel mount test jack, tin/ gold plated brass, M6 thread screw/ solder terminal, max. panel thickness 4mm 4mm panel mount test jack, tin/ gold plated brass, M6 thread screw/ solder terminal, max. panel thickness 8mm 4 mm Pin Diameter PART NO. / Housing color 4 mm Nickel Plated 930166100 Gold Plated 930166700 Nickel Plated 930175100 Gold Plated 930175700 930166101 930166701 930175101 930175701 930166102 930166702 930175102 930175702 930166103 930166703 930175103 930175703 930166104 930166704 930175104 930175704 930166105 930166705 930175107 930175707 930166106 930166706 930166107 930166707 930166109 930166709 Technical Data Contact Type jack Ø 4 mm jack Ø 4 mm Connection Type M6 thread, solder terminal 30 VAC / 60 VDC CAT I M6 thread, solder terminal 30 VAC / 60 VDC 32 A 5 mOhm screw thread M6 16 A 5 mOhm screw thread M6 Voltage Rating Measurement Category (IEC61010) Current Rating* Contact Resistance Mounting Type Material Specifications Jack Body CAT I tin / gold plated brass tin / gold plated brass Contact Spring – – Housing Polyamide Polyamide Environmental Conditions Temperature Range -25°C to +85 °C (-13 to 185°F) -25°C to +85 °C (-13 to 185°F) Flamability Rating Housing UL 94 V-2 UL 94 V-2 Drawing Measurements are shown in millimeters. Multiply by 0.03937 to convert to inches. max. 4 23,5 ø 7,7 ø 2,1 5 1,5 M 6x0,75 ø 10 ø8 ø4 ø2 3,5 16,5 35 * Please consider derating graph on page 80. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 63