RSF50 Series Compact internal fitting vertical Compact design Available in Nylon, Polypropylene & PPS 25VA & 100VA versions Many variants are UL recognised components File No. E171218 WRAS approved versions Technical Specification Material RSF50 series are compact vertically mounted devices with a single switch point. Mounting is either from the top or bottom of a tank from the inside, so requires access to the inside of the tank. Typical applications include vending machines, printing systems and chemical dosing equipment. These can be manufactured in a variety of plastics, with a choice of gasket materials, to suit most commonly used liquids. RSF54 Polypropylene WRAS approved Colour Black Opaque Temp. Range °C -20 / +75 -20 / +100 °F -4 ./ +167 -4 / +212 Min. Fluid SG 0.8 0.65 Must close level (SG=1) 11.5mm 15mm Must open level (SG=1) 22.5mm 26mm * Maximum temperature requires ETFE cable to be specified. RSF58 Polypropylene UL approved White -20 / +100 -4 / +212 0.65 15mm 26mm Electrical Specification Contact Form Switching Power Max VA Switching Voltage AC Max V Switching Voltage DC Max V Switching Current Max A All ratings are for resistive load only. 100W (H code) N/O (N/C) 100 300 300 1 Standard PartsMaterial RSF53H100RC Nylon RSF53Y100RC Nylon RSF54H100RC Polypropylene RSF54Y100RC Polypropylene RSF56H050TB PPS RSF56H100RC PPS RSF56Y050TB PPS RSF56Y100TB PPS RSF56Y100RC PPS RSF58H100RC PP (UL) RSF58Y100RC PP (UL) RSF53 Nylon 25W (Y code) N/O (N/C) 25 240 120 0.6 Temp Range Max Power -20ºC to+75ºC 100VA -20ºC to+75ºC 25A -20ºC to+100ºC 100VA -20ºC to+100ºC 25VA -10ºC to+120ºC 100VA -10ºC to+105ºC 100VA -10ºC to+120ºC 25VA -10ºC to+120ºC 25VA -10ºC to+105ºC 25VA -20ºC to+100ºC 100VA -20ºC to+100ºC 25VA RSF56 Polyphenylene Sulphide (PPS) Grey -10 / +120 * +14 / +248 * 0.85 9.5mm 20.5mm Leadouts 100cm PVC 16/0.2 100cm PVC 16/0.2 100cm PVC 16/0.2 100cm PVC 16/0.2 50cm ETFE 19/0.2 100cm PVC 16/0.2 50cm ETFE 19/0.2 100cm ETFE 19/0.2 100cm PVC 16/0.2 100cm PVC 16/0.2 100cm PVC 16/0.2 Gasket Nitrile Nitrile Nitrile Nitrile Viton Nitrile Viton Viton Nitrile Nitrile Nitrile Approvals WRAS WRAS WRAS WRAS WRAS & UL WRAS & UL WRAS & UL WRAS & UL WRAS & UL UL UL Custom versions can be made for particular applications. Please contact Cynergy3 with your requirements. The switch action may be reversed by removing the float, inverting it, then refitting to the stem. All the standard types are also available with 1/8”NPT tapered thread mounting (The last letter of the part number is replaced with 1/8.) Mechanical Dimensions All dimensions are in millimeters (inches) 30mm 6mm (0.2") max. tank wall (1.2") max. Thread sizes RSF53/4/6 M12x1.75 Thread Also available with 1/8” NPT Thread Nylon Nut 12.7mm(0.5") dia. hole 22mm (1.0") Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] ISO9001 C E R T I F I E D Must close level 44mm (1.7") max. Must open level 12.5mm (0.5") Nom. Float Travel Gasket Seal 27mm (1.2") dia. Note: Float Chamber may be inverted for alternative switch action. www.cynergy3.com RSF50 2015 © 2015 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.