500mW Zener

DEFENSE LOGISTICS AGENCY
LAND AND MARITIME
POST OFFICE BOX 3990
COLUMBUS, OH 43218-3990
April 23, 2013
Mr. Joe Saber
Sensitron Semiconductor
221 West Industry Court
Deer Park, NY 11729-4681
Dear Mr. Saber:
Re: Notification of Qualification, MIL-PRF-19500P, FSC 5961; VQ (VQE-13-026190); CAGE Code: 13409
Control Number: 039158
Qualification of your product is granted under the current issue of the specification as a result of successful testing of
device types JANTXV1N4100UR-1 and JANS1N4120UR-1 as allowed by paragraph E.4.1 of Performance Specification
MIL-PRF-19500P, Semiconductor Devices, FSC 5961, and performance specification /435, revision K. Extension is granted to the
other devices listed below as allowed by paragraph E.4.2.2 (Qualification by extension). Therefore, your products will be listed as
shown below in the Qualified Manufacturers List (QML) 19500. The beginning lot date codes for this qualification are 1148 for the
JV1N4100UR-1 and 1204 for the JS1N4120UR-1. The effective date of this qualification is April 16, 2013.
Thermal Conditions (subject to change after 5 lots with approval from the qualifying activity)
Package
IM
IH
tH
tMD
ZΘJX (Screening)
ZΘJX (QCI)
DO-35/DO-213AA
10 mA
0.8 A
10 ms
70 µs
19.61 oC/W max
20.64 oC/W max
Government
Designation
** 1N4099-1 through 1N4120-1
** 1N4099UR-1 through 1N4120UR-1
§ 1N4099-1 through 1N4120-1
§ 1N4099UR-1 through 1N4120UR-1
ESD
Class
3B
Manufacturer
Designation
CQN
Test Report
Reference
19500-3582-12
** Includes JAN JANTX and JANTXV quality levels only
§ Includes JANS quality level only
Prf
Spec
/435
Manufacturer
Name & Address
Same as above
Plant 1: Same as above
This qualification approval is based upon test report number 19500-3582-12 for your die and package, your letter dated
June 28, 2012 requesting qualification and is subject to the conditions as stated in the SD-6 and DOD 4120.24M.
Because we are held responsible for the accuracy and currency of this Qualified Manufacturers List, please let us know if
your company discontinues production of these products. Also, manufacturers are required to inform this office immediately after
learning of a potential issuance of a GIDEP alert, problem advisory, or other problem notification on their QML product. If you have
any questions, please contact Mr. Nash at 614-692-8290.
Sincerely,
/SIGNED/
JOSEPH GEMPERLINE
Chief
Sourcing and Qualifications Division
Similar pages