Consolidated Power Supply Unit Configuration Guide Introduction This document contains product and configuration information that will enable you to configure your system. The guide will ensure fast and proper configuration of your unit. October 2011 Revision 2.1 NEC Corporation CONFIGURATION GUIDE – Consolidated Power Supply Unit Contents TECHNICAL SPECIFICATION ........................................................................................ 3 Key Features .......................................................................................................................................... 3 Specification .......................................................................................................................................... 3 EXTERNAL VIEWS ......................................................................................................... 4 Front and Rear Views ........................................................................................................................... 4 Dimensions (mm) .................................................................................................................................. 5 CONFIGURATION DIAGRAM ......................................................................................... 5 UNIT CONFIGURATION .................................................................................................. 6 1 2 3 Enclosure........................................................................................................................................ 6 Power Supply Module ................................................................................................................... 6 DC Power Cable ............................................................................................................................. 7 REFERENCES................................................................................................................. 8 Unit Management .................................................................................................................................. 8 Copyright Notice and Liability Disclaimer .......................................................................................... 9 REVISION HISTORY ..................................................................................................... 10 NEC Corporation Revision 2.1, October 2011 2 CONFIGURATION GUIDE – Consolidated Power Supply Unit Technical Specification Key Features High energy efficiency with 80PLUS® Gold power supply Full manageability by integrated EXPRESSSCOPE Engine 2 Specification Model Consolidated PSU Part Number N8142-36F Interfaces 1 x VGA (15-pin mini D-sub,1x front) 1 x Serial (9-pin mini D-sub, RS232-C, Serial B, 1 x front) 2x USB2.0 (2 x front) 1 x Management LAN connector (100BASE-TX / 10BASE-T, RJ-45, 1 x rear) Power Supply Input (AC) Output (DC) 1 2 Number of Power Module Redundant PSU Type Standard : 2 / Maximum : 4 Power Connector Max. Output 4 x Propriety 12VDC Connector 1 Supported , hot plug 650 Watt 80 PLUS® Gold certified hot plug PSU 100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz 1,700 Watt 2 Power Consumption (Operating) 2,091 VA / 2,063 Watt Dimensions (W x D x H ) 444.0 x 671 x 43.5 mm / 17.5 x 26.4 x 1.7 in (1U) Weight (Minimum / Maximum) 13 kg / 15 kg, 28.66 lbs. / 33.07 lbs. Temperature, Relative Humidity (non-condensing) Operating: 10° to 40° C / 50° to 104° F, 20 to 80% Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80% Regulatory and Safety FCC, CE, BSMI, CCC, UL, CB, RoHS, WEEE Optional power modules may be required in accordance with output power required. The maximum output per 1 DC connector cannot exceed 840 Watt. NEC Corporation Revision 2.1, October 2011 3 External Views Front and Rear Views Front View A B C D E H I J FG K Legend A. Power Button G. Maintenance LED B. Power LED H. Serial Connector C. UID LED I. USB Connectors D. UID LED Button J. VGA Connector E. System Status LED K. Pull-out Tab F. Maintenance LED Button Rear View A B B G CD G H CD CD CD I EF J Legend A. Power Supply Bays F. UID LED B. Power Supply Module G. AC Inlet C. DC Output LED H. DC Outlet D. DC Output Button I. Pull-out Tab E. UID LED Button J. Management LAN Connector NEC Corporation Revision 2.1, October 2011 4 444.0 465.6 Dimensions (mm) 43.5 671.0 718.0 Configuration Diagram CHASSIS REAR CHASSIS FRONT Power Supply Bay #2 Power Supply Bay #1 Power Supply Module Power Supply Module DC out DC out DC out DC out Legend: NEC Corporation Standard components Revision 2.1, October 2011 5 Unit Configuration 1 Enclosure Product Name / Description Part Number Consolidated PSU 1U height enclosure Including 2 x 650 Watt 80 PLUS® Gold certified hot plug PSU N8142-36F 2 Power Supply Module Available bays: 2 Product Name / Description Part Number Power Supply Module 650 Watt 80 PLUS® Gold certified hot plug PSU N8181-76F Maximum Installable Servers See the table below for maximum installable server in accordance with number of power supply modules. Please consult our sales representative if other estimation is needed. E110b-M Server Configuration Number of Power Supply Modules Number of Installable Server Remark 1 GB memory, no-HDD 2 20 508 Watt total 3 40 985 Watt total 4 80 1,938 Watt total 2 20 567 Watt total 3 40 1,104 Watt total 4 74 2,041 Watt total 2 20 597 Watt total 3 40 1,163 Watt total 4 70 2,031 Watt total 2 20 657 Watt total 3 40 1,282 Watt total 4 63 2,050 Watt total 2 20 508 Watt total 3 40 985 Watt total 4 80 1,938 Watt total 2 20 567 Watt total 3 40 1,104 Watt total 4 74 2,041 Watt total 2 GB memory, no-HDD 1 GB memory, 1 x HDD 2 GB memory, 1 x HDD 1 GB memory, 1 x SSD 2 GB memory, 1 x SSD NEC Corporation Revision 2.1, October 2011 6 E120b-1 Type of Processor Number of Power Supply Modules Number of Installable Server Remark Xeon L5630 2 2 670 Watt total 3 4 1,158 Watt total 4 7 1,918 Watt total 8 2,032 Watt total, Up to 4x HDD can be installed 2 2 788 Watt total 3 4 1,421 Watt total 4 6 2,048 Watt total Xeon L5640 3 DC Power Cable Available DC outlet ports: 4 Product Name / Description Part Number DC Power Cable (Y-splitter, 80cm) 1 x DC output to 2 x DC input NOTE: The maximum DC output per 1 DC connector cannot exceed 840 Watt. K410-213(1A) NEC Corporation Revision 2.1, October 2011 7 References Unit Management The EXPRESSSCOPE Engine 2, integrated into the unit, provides superior remote control and system management features listed in the table below. Standard Temperature/voltage/power/fan Hardware event log collection Boot monitoring BIOS/POST stall monitoring Alerting HW error and Boot error (by SNMP, E-Mail) Remote console POST/BIOS setup, DOS utility (via LAN) Boot screen Remote control (via LAN) Remote reset/power supply management controller power on-off System Management Command Line Protocol (DMTF compliant) Remote control via Web browser (without dedicated app) Remote batch Scheduling (without UPS) - Others Set automatic IP address via DNS/DHCP Centralized management Industry standard Monitoring and control of multiple servers IPMI 2.0 Hardware monitoring NEC Corporation Revision 2.1, October 2011 8 Copyright Notice and Liability Disclaimer The information contained herein is subject to change without notice. All other products, brands, or trade names used in this document are trademarks or registered trademarks of their respective holders. NEC shall not be liable for technical or editorial errors or omissions contained herein. NEC Corporation Revision 2.1, October 2011 9 Revision History Revision Date Description 2.1 October 18th, 2011 Other: Correct incorrect information in Specification, 3 DC Power Cable, and References. 2.0 April 8th, 2011 Other: Added section of maximum installable servers for E120b-1 1.0 September 6th, 2010 Initial release NEC Corporation Revision 2.1, October 2011 10