HP 90 – Polypropylene – 90 x 90 mm (3.54 x 3.54 in.) Standard Features • Protection Level: • Technical: • Enclosure Material: • Material IP55 Metric - Inlets 7 x M20 - Sides 1 x M16 - Rear 7 Installed M20 Entry Seals (5 - 16mm) Snap-on Cover Semi - Rigid Polypropylene Temperature Range: -30˚C to 100˚C (-22˚F to 212˚F) • Gasket Material: • Color: • Accessories: None / Contact Labyrinth Seal Light Gray See section below HP Ordering Information Cat. No. Type Length Dimensions mm (in) Width Height Std. Pk. Enclosure 325-990 HP90 90 mm (3.54 in) 90 mm (3.54 in) 45 mm (1.77 in) 10 Ordering Information Cat. No. Type Std. Pk. Terminal Universal Entry Seal - M20 840-004 216-420 4mm2 - 5 pole M20 10 100 Accessories For Liquid Tight Strain Reliefs please refer to catalog pages 150-152. 90.5 mm (3.57 in) 87.5 mm (3.44 in) 5 mm (0.20 in) 44.5 mm (1.76 in) 68.5 mm (2.70in) M16 142 M20 M20/25 Knockout Detail M25/32 M32/40 M40/50 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com