Configuration guide - Air cooling

NEC Express5800/GT110d-S
Configuration Guide
Air cooling model
Introduction
This document contains product and configuration information that will enable you to configure your system. The
guide will ensure fast and proper configuration of your NEC Express5800 server.
February 2012
Revision 1.0
NEC Corporation
CONFIGURATION GUIDE – NEC Express5800/GT110d-S / Air cooling model
Contents
TECHNICAL SPECIFICATION ........................................................................................ 3
Key Features .......................................................................................................................................... 3
Specification .......................................................................................................................................... 3
EXTERNAL VIEWS ......................................................................................................... 7
Front and Rear Views ........................................................................................................................... 7
Dimensions (mm) .................................................................................................................................. 8
CONFIGURATION DIAGRAM ......................................................................................... 9
SERVER CONFIGURATION ......................................................................................... 10
1
2
3
Base Models ................................................................................................................................. 10
Processor ..................................................................................................................................... 10
Memory ......................................................................................................................................... 10
Maximum Available Memory .......................................................................................................... 11
4 Internal Hard Disk Drives ............................................................................................................ 12
4.1
RAID Configuration ............................................................................................................. 12
4.2
Internal Drive Configuration ................................................................................................ 13
5 Internal Optical Drive ................................................................................................................... 24
6 Internal Tape / RDX Drives .......................................................................................................... 24
6.1
Tape / RDX Drive Selection ................................................................................................ 24
6.2
Tape / RDX Configuration ................................................................................................... 24
7 Internal Flash Memory ................................................................................................................. 25
8 PCI Card ........................................................................................................................................ 26
8.1
LAN/SCSI Controller ........................................................................................................... 26
8.2
Serial Port Adapter .............................................................................................................. 26
9 Other Add-in Components .......................................................................................................... 26
9.1
Input Devices ...................................................................................................................... 26
10 Add-on Components ................................................................................................................... 26
10.1 Server Management License .............................................................................................. 26
10.2 Dust / Insect Proof Kit ......................................................................................................... 27
10.3 Flash FDD ........................................................................................................................... 27
10.4 Medium and Cartridge ........................................................................................................ 27
REFERENCES............................................................................................................... 28
Note for Ordering ................................................................................................................................ 28
Server Management ............................................................................................................................ 28
OS Support Matrix for PCI Cards ...................................................................................................... 29
Supporting PCI Cards and Installable Slots ..................................................................................... 29
Copyright Notice and Liability Disclaimer ........................................................................................ 30
REVISION HISTORY ..................................................................................................... 31
NEC Corporation
Revision 1.0, February 2012
2
CONFIGURATION GUIDE – NEC Express5800/GT110d-S / Air cooling model
Technical Specification
Key Features





Ultra compact form of 93mm in width, 13 liter in volume
High performance with the latest Intel® Xeon® processor E3-1200 series
Up to 32 GB of high speed DDR3-1333 memory
Full manageability by integrated EXPRESSSCOPE Engine 3
Heat resilience: maximum 40° C / 104° F operating ambient temperature
Specification
3.5-inch Drive Model
Model
GT110d-S
Part Number
Processor
N8100-1857F
Type
Intel® Pentium® processor
G630
Intel® Xeon® processor
E3-1220
Clock speed
2.70 GHz
3.10 GHz
Number of Processors
1
Cache
3 MB
8 MB
Cores and Threads
2C / 2T
4C / 4T
Chipset
Memory
Internal Storage
Intel® C204 Chipset
Type
DDR3-1333 ECC Unbuffered DIMM
Standard Capacity
0 GB
Maximum Capacity
32 GB (4 x 8 GB)
Standard Capacity
0 GB
Maximum Capacity
3.5-inch SATA : 6 TB (2 x 3 TB)
Disk Controller
SATA : 3Gb/s (Integrated)
RAID
SATA :
Hot Plug
-
Optical Disk Drive
Slim DVD-ROM
3.5-inch Media Bays
[free]
Disk Drive Bays [free]
1 [1]
12
RAID 0/1
3.5-inch: 2 [2]
Expansion Slots [free]
Total: 4 slots available
1 [1] x PCIe 2.0 x16 (x16 connector)
2 [2] x PCIe 2.0 x4 (x8 connector)
1 [1] x 32-bit/33 MHz PCI
Video Controller (VRAM)
Integrated in Server Management Controller (32MB)
Interfaces
1 x VGA (15-pin mini D-sub,1x rear)
1 x Serial (9-pin mini D-sub, RS232-C, Serial A, 1 x rear)
8x USB2.0 (2 x front, 4 x rear, 2 x internal)
2x 1000BASE-T LAN connector (1000BASE-T / 100BASE-TX /
10BASE-T, RJ-45, 2 x rear)
1 x Management LAN connector (100BASE-TX / 10BASE-T,
RJ-45, 1 x rear)
Server Management
EXPRESSSCOPE Engine 3
System Fan
Standard
Power Supply
1 x 250 Watt 80 PLUS® Sliver certified non-Hot plug PSU
100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz
NEC Corporation
Revision 1.0, February 2012
3
CONFIGURATION GUIDE – NEC Express5800/GT110d-S / Air cooling model
Model
Power
Consumption
GT110d-S
(100VAC, Max. Config,
Idling)
(100VAC, Max. Config,
Operating)
Minimum Config.
78 VA / 75 Watt
83 VA / 80 Watt
118 VA / 117 Watt
185 VA / 183 Watt
Acoustical Noise
(Sound Pressure
Maximum Config.
3
Level)
Dimensions (W x D x H )
30.2 dB
30.6 dB
30.9 dB
37.2 dB
Weight (Minimum / Maximum)
9 kg / 12 kg, 19.84 lbs. / 26.46 lbs.
Temperature, Relative Humidity
(non-condensing)
Operating: 10° to 40° C / 50° to 104° F, 20 to 80%
Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80%
Regulatory and Safety
FCC, CE, BSMI, CCC, UL, CB, RoHS, WEEE
Operating Systems and Virtualization
Software
Microsoft® Windows Server® 2003 R2, Standard Edition SP2 or later
Microsoft® Windows Server® 2003 R2, Standard x64 Edition SP2 or later
Microsoft® Windows Server® 2008 Standard
Microsoft® Windows Server® 2008 Standard (x64)
Microsoft® Windows Server® 2008 Enterprise
Microsoft® Windows Server® 2008 Enterprise (x64)
Microsoft Windows Server 2008 R2 Standard
Microsoft Windows Server 2008 R2 Enterprise
4
Red Hat Enterprise Linux 5.6 or later
4
Red Hat Enterprise Linux 5.6 or later (EM64T)
4
Red Hat Enterprise Linux 6.1 or later
4
Red Hat Enterprise Linux 6.1 or later (EM64T)
VMware ESXi™ 5.0
1
2
3
4
93 x 386 x 363 mm / 3.8 x 15.2 x 14.3 in (4U)
Embedded SATA RAID controller is supported only on Windows operating systems.
Embedded SATA RAID Controller does not support RAID 10 configured with 2TB and 3TB HDDs.
Noise emission was measured in accordance with ISO 7779. The actual value may vary by the
operating environment.
For Linux support, contact our sales representative or go to the NEC website at:
http://www.nec.com/global/prod/express/linux/index.html
2.5-inch Drive Model
Model
GT110d-S
Part Number
N8100-1858F
Processor
Type
Intel® Pentium® processor
G630
Intel® Xeon® processor
E3-1220
Clock speed
2.70 GHz
3.10 GHz
Number of Processors
1
Cache
3 MB
8 MB
Cores and Threads
2C / 2T
4C / 4T
Chipset
Memory
Internal Storage
NEC Corporation
Intel® C204 Chipset
Type
DDR3-1333 ECC Unbuffered DIMM
Standard Capacity
0 GB
Maximum Capacity
32 GB (4 x 8 GB)
Standard Capacity
0 GB
Maximum Capacity
SAS : 4.5 TB (5 x 900 GB)
2
SATA : 5 TB (5 x 1 TB)
2
SSD : 500 GB (5 x 100 GB)
Revision 1.0, February 2012
2
4
CONFIGURATION GUIDE – NEC Express5800/GT110d-S / Air cooling model
Model
Internal Storage
(Cont.)
GT110d-S
Disk Controller
SATA : 3Gb/s (Integrated)
SAS : 6 Gb/s (Optional)
RAID
SATA : RAID 0/1/10 (Standard), RAID 5/6 (Optional)
SAS : RAID 0/1/5/6/10 (Optional)
Hot Plug
Supported
Optical Disk Drive
Slim DVD-ROM
3.5-inch Media Bays
[free]
Disk Drive Bays [free]
1 [1]
1
5 [5]
2
Expansion Slots [free]
Total: 4 slots available
1 [1] x PCIe 2.0 x16 (x16 connector)
2 [2] x PCIe 2.0 x4 (x8 connector)
1 [1] x 32-bit/33 MHz PCI
Video Controller (VRAM)
Integrated in Server Management Controller (32MB)
Interfaces
1 x VGA (15-pin mini D-sub,1x rear)
1 x Serial (9-pin mini D-sub, RS232-C, Serial A, 1 x rear)
8x USB2.0 (2 x front, 4 x rear, 2 x internal)
2x 1000BASE-T LAN connector (1000BASE-T / 100BASE-TX /
10BASE-T, RJ-45, 2 x rear)
1 x Management LAN connector (100BASE-TX / 10BASE-T,
RJ-45, 1 x rear)
Server Management
EXPRESSSCOPE Engine 3
System Fan
Standard
Power Supply
1 x 250 Watt 80 PLUS® Sliver certified non-Hot plug PSU
100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz
Power
Consumption
(100VAC, Max. Config,
Idling)
(100VAC, Max. Config,
Operating)
Minimum Config.
107 VA / 101 Watt
112 VA / 108 Watt
146 VA / 144 Watt
221 VA / 220 Watt
Acoustical Noise
(Sound Pressure
Maximum Config.
3
Level)
Dimensions (W x D x H )
37.5 dB
37.3 dB
37.6 dB
39.8 dB
Weight (Minimum / Maximum)
9 kg / 12 kg, 19.84 lbs. / 26.46 lbs.
Temperature, Relative Humidity
(non-condensing)
Operating: 10° to 40° C / 50° to 104° F, 20 to 80%
Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80%
Regulatory and Safety
FCC, CE, BSMI, CCC, UL, CB, RoHS, WEEE
Operating Systems and Virtualization
Software
Microsoft® Windows Server® 2003 R2, Standard Edition SP2 or later
Microsoft® Windows Server® 2003 R2, Standard x64 Edition SP2 or later
Microsoft® Windows Server® 2008 Standard
Microsoft® Windows Server® 2008 Standard (x64)
Microsoft® Windows Server® 2008 Enterprise
Microsoft® Windows Server® 2008 Enterprise (x64)
Microsoft Windows Server 2008 R2 Standard
Microsoft Windows Server 2008 R2 Enterprise
4
Red Hat Enterprise Linux 5.6 or later
4
Red Hat Enterprise Linux 5.6 or later (EM64T)
4
Red Hat Enterprise Linux 6.1 or later
4
Red Hat Enterprise Linux 6.1 or later (EM64T)
VMware ESXi™ 5.0
1
2
93 x 386 x 363 mm / 3.8 x 15.2 x 14.3 in (4U)
Embedded SATA RAID controller is supported only on Windows operating systems.
An optional HDD Cage is required to install more than 3 hard drives. The optional HDD Cage
occupies 3.5-inch media bay.
NEC Corporation
Revision 1.0, February 2012
5
CONFIGURATION GUIDE – NEC Express5800/GT110d-S / Air cooling model
3
4
Noise emission was measured in accordance with ISO 7779. The actual value may vary by the
operating environment.
For Linux support, contact our sales representative or go to the NEC website at:
http://www.nec.com/global/prod/express/linux/index.html
NEC Corporation
Revision 1.0, February 2012
6
External Views
Front and Rear Views
A
A
K
S
L
B
B
C
D
E
F
G
C
D
E
F
G
H
H
I
M
N
J
O
P
Q
R
3.5-inch Drive Model
2.5-inch Drive Model
Front View
Rear View
Legend
A.
Vent Holes Cover
K.
Serial Port Connector
B.
Power Button
L.
VGA Connector
C.
Power LED
M.
BMC Reset Switch
D.
Hard Drive Activity LED
N.
Dump (NMI) Switch
E.
System Status LED
O.
USB Connectors
F.
USB Connectors
P.
Management LAN Connector
G.
Optical Disk Drive
Q.
Data LAN Connectors
H.
3.5-inch Media Bay
R.
PCI Slots
I.
2.5-inch HDD Bay
S.
AC Inlet
J.
HDD Bay Cover Key
NEC Corporation
Revision 1.0, February 2012
7
Dimensions (mm)
Tower Installation
f
Desktop Installation
NEC Corporation
Revision 1.0, February 2012
8
Configuration Diagram
3.5-inch Drive Model
CHASSIS
FRONT
Fixed
Power
Supply
Processor
Socket #1
Media Bay #1
DVD-ROM
Media Bay #1
DIMM #2
DIMM #4
DIMM #1
DIMM #3
3.5inch
HDD
Cage
HDD Bay #1
CHASSIS
REAR
PCIe 2.0 x16 (x16 socket) LP/MD2
PCI 32-bit/33MHz LP/MD2
Media Bay #2
BBU slot #1
Legend:
Minimum requirement components
HDD Bay #0
PCIe 2.0 x4 (x8 socket) LP/MD2
Media Bay #2
PCIe 2.0 x4 (x8 socket) LP/MD2
Standard components
2.5-inch Drive Model
Media Bay #1
DVD-ROM
CHASSIS
FRONT
HDD Bay #2
HDD Bay #1
DIMM #2
DIMM #4
DIMM #1
DIMM #3
Processor
Socket #1
2.5-inch
HDD Cage
HDD Bay #0
2.5-inch
HDD Cage
Fixed
Power
Supply
Media Bay #1
CHASSIS
REAR
PCIe 2.0 x4 (x8 socket) LP/MD2
PCIe 2.0 x16 (x16 socket) LP/MD2
PCI 32-bit/33MHz LP/MD2
Media Bay #2
BBU slot #1
Legend:
NEC Corporation
Minimum requirement components
Revision 1.0, February 2012
Media Bay #2
PCIe 2.0 x4 (x8 socket) LP/MD2
Standard components
9
Server Configuration
1 Base Models
Product Name / Description
Part Number
NEC Express5800 GT110d-S Server
no processor, no RAM, no 3.5-inch HDD
Including:
1x Slim DVD-ROM drive, 3.5-inch HDD Cage, EXPRESSBUILDER DVD
NEC Express5800 GT110d-S Server
no processor, no RAM, no 2.5-inch HDD
Including:
1x Slim DVD-ROM drive, 2.5-inch HDD Cage, EXPRESSBUILDER DVD
N8100-1857F
N8100-1858F
NOTE:

The base model must be ordered with a processor kit.
2 Processor
Available sockets: 1
Product Name / Description
Part Number
Processor Kit (2C/G630)
Intel® Pentium® Processor G630 (2.70GHz / 2C-2T / 3MB)
Processor Kit (4C/E3-1220)
Intel® Xeon® Processor E3-1220 (3.10 GHz / 4C-4T / 8 MB)
N8101-528F
N8101-504F
NOTE:


One processor kit from above must be installed.
The processor kit must be ordered with the base model.
3 Memory
Available slots: 4
Product Name / Description
Part Number
2GB Memory Kit
2GB (1x 2 GB) DDR3-1333 ECC Unbuffered DIMM
4GB Memory Kit
4GB (1x 4 GB) DDR3-1333 ECC Unbuffered DIMM
8GB Memory Kit
8GB (1x 8 GB) DDR3-1333 ECC Unbuffered DIMM
N8102-416F
N8102-417F
N8102-418F
NOTE:



Minimum one memory kit must be installed.
It is recommended to install two identical memory kits for dual-channel symmetric configuration to
increase memory transfer speed.
Actual DIMM speed sets to 1066 MHz when you choose Pentium Processor.
NEC Corporation
Revision 1.0, February 2012
10
Maximum Available Memory
See the table below for the maximum memory size that you can actually use on your system.
The maximum available memory is less than the maximum physical memory supported by your system
because some chipsets require PCI resource space of about 750MB. PCI resource requirements vary
depending on the type and the number of PCI cards you are using.
Maximum memory size supported by OS
Maximum available memory
4 GB
Microsoft Windows Server 2003 R2, Standard Edition
Microsoft Windows Server 2008 Standard
4 GB( HW-DEP enabled)
App. 3.3 GB (HW-DEP disabled)
32 GB
Microsoft Windows Server 2003 R2, Standard x64 Edition
Microsoft Windows Server 2008 Standard (x64)
Microsoft Windows Server 2008 R2 Standard (x64)
32 GB
64 GB
Microsoft Windows Server 2003 R2, Enterprise Edition
Microsoft Windows Server 2008 Enterprise
32 GB
1 TB
Microsoft Windows Server 2003 R2, Enterprise x64 Edition
32 GB
2 TB
Microsoft Windows Server 2008 Enterprise (x64)
Microsoft Windows Server 2008 R2 Enterprise (x64)
32 GB
16 GB
Red Hat Enterprise Linux 5
Red Hat Enterprise Linux 6
16 GB
256 GB
Red Hat Enterprise Linux 5 (EM64T)
32 GB
2 TB
Red Hat Enterprise Linux 6 (EM64T)
32 GB
NEC Corporation
Revision 1.0, February 2012
11
4 Internal Hard Disk Drives
4.1
RAID Configuration
Refer to the section in accordance with your disk form factor and RAID configuration.
4.1.1
3.5-inch Drive
Available Disk
Refer to 4.2.1
SATA
128MB Cache
Refer to 4.2.2
SATA
256MB Cache
Refer to 4.2.3
SATA
512MB Cache
Refer to 4.2.4
SATA
Non-RAID
Embedded SATA
RAID
RAID 0/1
Optional RAID
Controller
NOTE:



Embedded SATA RAID controller is supported only on Windows operating systems. An optional RAID
controller is required to configure RAID array for other operating systems.
All hard drives within a RAID array should be of the same capacity.
An optional RAID controller occupies one PCI slot.
4.1.2
Up to three 2.5-inch Drive
Available Disk
Refer to 4.2.5
SATA, SSD
128MB Cache
Refer to 4.2.6
SAS, SATA, SSD
256MB Cache
Refer to 4.2.7
SAS, SATA, SSD
256MB Cache
Refer to 4.2.8
SAS, SATA, SSD
512MB Cache
Refer to 4.2.9
SAS, SATA, SSD
Non-RAID
Embedded SATA
RAID
RAID 0/1
Optional RAID
Controller
RAID 5/6
NOTE:





Embedded SATA RAID controller is supported only on Windows operating systems. An optional RAID
controller is required to configure RAID array for other operating systems.
All hard drives within a RAID array should be of the same capacity and rotation speed.
Mixing SAS and SATA hard drives in the same system is not supported.
Hot plug insertion/removal is not supported with the embedded SATA non-RAID controller..
An optional RAID controller occupies one PCI slot.
NEC Corporation
Revision 1.0, February 2012
12
4.1.3
Up to five 2.5-inch Drive
Available Disk
RAID 0/1/10
128MB Cache
Refer to 4.2.10
SAS, SATA, SSD
256MB Cache
Refer to 4.2.11
SAS, SATA, SSD
256MB Cache
Refer to 4.2.12
SAS, SATA, SSD
512MB Cache
Refer to 4.2.13
SAS, SATA, SSD
RAID 5/6
NOTE:




An optional RAID controller occupies one PCI slot.
All hard drives within a RAID array should be of the same capacity and rotation speed.
SAS and SATA hard drives must be installed in separate HDD Cages.
No internal tape drive can be installed in the drive configuration.
4.2
Internal Drive Configuration
4.2.1
3.5-inch Drive with Embedded SATA Controller
Category
Product Name / Description
Part Number
Storage Controller
Embedded SATA Controller
2 x SATA ports, RAID 0/1 capable
Internal SATA Cable
1x SATA to 1x SATA, 2 sets
3.5-inch HDD Cage
2 x 3.5-inch non hot plug (fixed) hard drive bays
160GB HDD
1 x 160 GB, 3.5-inch, SATA2, 7,200 rpm
250GB HDD
1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm
2TB HDD
1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm
3TB HDD
1 x 3 TB, 3.5-inch, SATA2, 7,200 rpm
(Standard)
Cable
HDD Cage
HDD
2 slots available
(Standard)
(Standard)
N8150-372
N8150-373
N8150-343
N8150-260
N8150-284
N8150-339
NOTE:



Embedded SATA RAID controller is supported only on Windows operating systems. An optional RAID
controller is required to configure RAID array for other operating systems.
3 TB HDDs are not supported with the embedded SATA non-RAID controller.
All hard drives within a RAID array should be of the same capacity.
NEC Corporation
Revision 1.0, February 2012
13
4.2.2
3.5-inch Drive with RAID 0/1 Controller with 128 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (128MB, RAID 0/1)
Promise SuperTrak TX8760T-128
RAID 0/1/10, 128MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s,
SATA 3Gb/s, LP / FH
RAID Battery Backup Unit
for Promise SuperTrak EX8760T
Internal SATA Cable
1x mini-SAS to 2x SATA
3.5-inch HDD Cage
2 x 3.5-inch non hot plug (fixed) hard drive bays
160GB HDD
1 x 160 GB, 3.5-inch, SATA2, 7,200 rpm
250GB HDD
1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm
2TB HDD
1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm
3TB HDD
1 x 3 TB, 3.5-inch, SATA2, 7,200 rpm
N8103-128
RAID BBU
Recommended
Cable
Required
HDD Cage
HDD
2 slots available
N8103-141
K410-253(00)
(Standard)
N8150-372
N8150-373
N8150-343
N8150-260
N8150-284
N8150-339
NOTE:

All hard drives within a RAID array should be of the same capacity.
4.2.3
3.5-inch Drive with RAID 0/1 Controller with 256 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (256MB, RAID 0/1)
LSI MegaRAID SAS 9264-8i
RAID 0/1, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s,
LP / FH
RAID Battery Backup Unit
for LSI MegaRAID SAS 9264
Internal SATA Cable
1x mini-SAS to 2x SATA
3.5-inch HDD Cage
2 x 3.5-inch non hot plug (fixed) hard drive bays
160GB HDD
1 x 160 GB, 3.5-inch, SATA2, 7,200 rpm
250GB HDD
1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm
2TB HDD
1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm
N8103-129
RAID BBU
Recommended
Cable
Required
HDD Cage
HDD
2 slots available
N8103-121
K410-253(00)
(Standard)
N8150-372
N8150-373
N8150-343
N8150-260
N8150-284
NOTE:

All hard drives within a RAID array should be of the same capacity.
NEC Corporation
Revision 1.0, February 2012
14
4.2.4
3.5-inch Drive with RAID 0/1 Controller with 512 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller(512MB, RAID0/1/5/6)
Promise SuperTrak EX8760T-512
RAID 0/1/5/6/10/50, 512MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s,
SATA 3Gb/s, LP / FH
RAID Battery Backup Unit
for Promise SuperTrak EX8760T
Internal SATA Cable
1x mini-SAS to 2x SATA
3.5-inch HDD Cage
4 x 3.5-inch non hot plug (fixed) hard drive bays
160GB HDD
1 x 160 GB, 3.5-inch, SATA2, 7,200 rpm
250GB HDD
1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm
2TB HDD
1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm
3TB HDD
1 x 3 TB, 3.5-inch, SATA2, 7,200 rpm
N8103-134
RAID BBU
Recommended
Cable
Required
HDD Cage
HDD
2 slots available
N8103-141
K410-253(00)
(Standard)
N8150-372
N8150-373
N8150-343
N8150-260
N8150-284
N8150-339
NOTE:

All hard drives within a RAID array should be of the same capacity.
4.2.5
2.5-inch Drive with Embedded SATA Controller
Category
Product Name / Description
Part Number
Storage Controller
Embedded SATA Controller
4 x SATA ports, RAID 0/1/10 capable
Internal SATA Cable
3x SATA to 1x mini-SAS
2.5-inch HDD Cage
3 x 2.5-inch hot plug hard drive bays
160GB HDD
1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm
100GB SSD
1 x 100 GB, 2.5-inch, SATA2
(Standard)
Cable
Required
HDD Cage
HDD
4 slots
available
SATA
SSD
K410-241(00)
(Standard)
N8150-276
N8150-277
N8150-334
N8150-707
NOTE



Embedded SATA RAID controller is supported only on Windows operating systems. An optional RAID
controller is required to configure RAID array for other operating systems.
All hard drives within a RAID array should be of the same capacity and rotation speed.
Hot plug insertion/removal is not supported with the Embedded SATA non-RAID controller..
NEC Corporation
Revision 1.0, February 2012
15
4.2.6
Up to three 2.5-inch Drive with RAID 0/1 Controller with 128 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (128MB, RAID 0/1)
Promise SuperTrak TX8760T-128
RAID 0/1, 128MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s,
LP / FH
RAID Battery Backup Unit
for Promise SuperTrak EX8760T
Internal SAS/SATA Cable
1x mini-SAS to 4x fixed SAS
2.5-inch HDD Cage
3 x 2.5-inch hot plug hard drive bays
146.5GB HDD
1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
300GB HDD
1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
450GB HDD
1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
600GB HDD
1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
900GB HDD
1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
73.2GB HDD
1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
146.5GB HDD
1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
300GB HDD
1 x 300 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
160GB HDD
1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm
100GB SSD
1 x 100 GB, 2.5-inch, SATA2
N8103-128
RAID BBU
Recommended
Cable
Required
HDD Cage
HDD
3 slots
available
SAS
SATA
SSD
N8103-141
K410-180(00)
(Standard)
N8150-374
N8150-375
N8150-376
N8150-377
N8150-332
N8150-378
N8150-379
N8150-331
N8150-276
N8150-277
N8150-334
N8150-707
NOTE:


All hard drives within a RAID array should be of the same capacity and rotation speed.
Mixing SAS and SATA hard drives in the same system is not supported.
NEC Corporation
Revision 1.0, February 2012
16
4.2.7
Up to three 2.5-inch Drive with RAID 0/1 Controller with 256 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (256MB, RAID 0/1)
LSI MegaRAID SAS 9264-8i
RAID 0/1, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s,
LP / FH
RAID Battery Backup Unit
for LSI MegaRAID SAS 9264
Internal SAS/SATA Cable
1x mini-SAS to 4x fixed SAS
2.5-inch HDD Cage
3 x 2.5-inch hot plug hard drive bays
146.5GB HDD
1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
300GB HDD
1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
450GB HDD
1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
600GB HDD
1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
900GB HDD
1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
73.2GB HDD
1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
146.5GB HDD
1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
300GB HDD
1 x 300 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
160GB HDD
1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm
100GB SSD
1 x 100 GB, 2.5-inch, SATA2
N8103-129
RAID BBU
Recommended
Cable
Required
HDD Cage
HDD
3 slots
available
SAS
SATA
SSD
N8103-121
K410-180(00)
(Standard)
N8150-374
N8150-375
N8150-376
N8150-377
N8150-332
N8150-378
N8150-379
N8150-331
N8150-276
N8150-277
N8150-334
N8150-707
NOTE:


All hard drives within a RAID array should be of the same capacity and rotation speed.
Mixing SAS and SATA hard drives in the same system is not supported.
NEC Corporation
Revision 1.0, February 2012
17
4.2.8
Up to three 2.5-inch Drive with RAID 5/6 Controller with 256 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (256MB, RAID 0/1/5/6)
LSI MegaRAID SAS 9264-8i
RAID 0/1/5/6/10/50, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s,
SATA 3Gb/s, LP / FH
RAID Battery Backup Unit
for LSI MegaRAID SAS 9264
Internal SAS/SATA Cable
1x mini-SAS to 4x fixed SAS
2.5-inch HDD Cage
3 x 2.5-inch hot plug hard drive bays
146.5GB HDD
1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
300GB HDD
1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
450GB HDD
1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
600GB HDD
1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
900GB HDD
1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
73.2GB HDD
1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
146.5GB HDD
1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
300GB HDD
1 x 300 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
160GB HDD
1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm
100GB SSD
1 x 100 GB, 2.5-inch, SATA2
N8103-130
RAID BBU
Recommended
Cable
Required
HDD Cage
HDD
3 slots
available
SAS
SATA
SSD
N8103-121
K410-180(00)
(Standard)
N8150-374
N8150-375
N8150-376
N8150-377
N8150-332
N8150-378
N8150-379
N8150-331
N8150-276
N8150-277
N8150-334
N8150-707
NOTE:


All hard drives within a RAID array should be of the same capacity and rotation speed.
Mixing SAS and SATA hard drives in the same system is not supported.
NEC Corporation
Revision 1.0, February 2012
18
4.2.9
Up to three 2.5-inch Drive with RAID 5/6 Controller with 512 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller(512MB, RAID0/1/5/6)
Promise SuperTrak EX8760T-512
RAID 0/1/5/6/10/50, 512MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s,
SATA 3Gb/s, LP / FH
RAID Battery Backup Unit
for Promise SuperTrak EX8760T
Internal SAS/SATA Cable
1x mini-SAS to 4x fixed SAS
2.5-inch HDD Cage
3 x 2.5-inch hot plug hard drive bays
146.5GB HDD
1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
300GB HDD
1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
450GB HDD
1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
600GB HDD
1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
900GB HDD
1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
73.2GB HDD
1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
146.5GB HDD
1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
300GB HDD
1 x 300 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
160GB HDD
1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm
100GB SSD
1 x 100 GB, 2.5-inch, SATA2
N8103-134
RAID BBU
Recommended
Cable
Required
HDD Cage
HDD
3 slots
available
SAS
SATA
SSD
N8103-141
K410-180(00)
(Standard)
N8150-374
N8150-375
N8150-376
N8150-377
N8150-332
N8150-378
N8150-379
N8150-331
N8150-276
N8150-277
N8150-334
N8150-707
NOTE:


All hard drives within a RAID array should be of the same capacity and rotation speed.
Mixing SAS and SATA hard drives in the same system is not supported.
NEC Corporation
Revision 1.0, February 2012
19
4.2.10 Up to five 2.5-inch Drive with RAID 0/1 Controller with 128 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (128MB, RAID 0/1)
Promise SuperTrak TX8760T-128
RAID 0/1/10, 128MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA
3Gb/s, LP / FH
RAID Battery Backup Unit
for Promise SuperTrak EX8760T
Internal SAS/SATA Cable
1x mini-SAS to 4x fixed SAS
2.5-inch HDD Cage
3 x 2.5-inch hot plug hard drive bays
Additional 2.5-Inch HDD Cage
2x 2.5-inch hot plug hard drive bays
Including 1x mini-SAS to 1x mini-SAS cable
146.5GB HDD
1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
300GB HDD
1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
450GB HDD
1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
600GB HDD
1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
900GB HDD
1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
73.2GB HDD
1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
146.5GB HDD
1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
300GB HDD
1 x 300 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
160GB HDD
1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm
100GB SSD
1 x 100 GB, 2.5-inch, SATA2
N8103-128
RAID BBU
Recommended
Cable
Required
HDD Cage
Optional HDD Cage
Required
HDD
5 slots
available
SAS
SATA
SSD
N8103-141
K410-180(00)
(Standard)
N8154-37
N8150-374
N8150-375
N8150-376
N8150-377
N8150-332
N8150-378
N8150-379
N8150-331
N8150-276
N8150-277
N8150-334
N8150-707
NOTE:



All hard drives within a RAID array should be of the same capacity and rotation speed.
SAS and SATA hard drives must be installed in separate HDD Cages.
No internal tape drive can be installed in the drive configuration.
NEC Corporation
Revision 1.0, February 2012
20
4.2.11 Up to five 2.5-inch Drive with RAID 0/1 Controller with 256 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (256MB, RAID 0/1)
LSI MegaRAID SAS 9264-8i
RAID 0/1, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s,
LP / FH
RAID Battery Backup Unit
for LSI MegaRAID SAS 9264
Internal SAS/SATA Cable
1x mini-SAS to 4x fixed SAS
2.5-inch HDD Cage
3 x 2.5-inch hot plug hard drive bays
Additional 2.5-Inch HDD Cage
2x 2.5-inch hot plug hard drive bays
Including 1x mini-SAS to 1x mini-SAS cable
146.5GB HDD
1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
300GB HDD
1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
450GB HDD
1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
600GB HDD
1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
900GB HDD
1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
73.2GB HDD
1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
146.5GB HDD
1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
300GB HDD
1 x 300 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
160GB HDD
1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm
100GB SSD
1 x 100 GB, 2.5-inch, SATA2
N8103-129
RAID BBU
Recommended
Cable
Required
HDD Cage
Optional HDD Cage
Required
HDD
5 slots
available
SAS
SATA
SSD
N8103-121
K410-180(00)
(Standard)
N8154-37
N8150-374
N8150-375
N8150-376
N8150-377
N8150-332
N8150-378
N8150-379
N8150-331
N8150-276
N8150-277
N8150-334
N8150-707
NOTE:



All hard drives within a RAID array should be of the same capacity and rotation speed.
SAS and SATA hard drives must be installed in separate HDD Cages.
No internal tape drive can be installed in the drive configuration.
NEC Corporation
Revision 1.0, February 2012
21
4.2.12 Up to five 2.5-inch Drive with RAID 5/6 Controller with 256 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (256MB, RAID 0/1/5/6)
LSI MegaRAID SAS 9264-8i
RAID 0/1/5/6/10/50, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s,
SATA 3Gb/s, LP / FH
RAID Battery Backup Unit
for LSI MegaRAID SAS 9264
Internal SAS/SATA Cable
1x mini-SAS to 4x fixed SAS
2.5-inch HDD Cage
3 x 2.5-inch hot plug hard drive bays
Additional 2.5-Inch HDD Cage
2x 2.5-inch hot plug hard drive bays
Including 1x mini-SAS to 1x mini-SAS cable
146.5GB HDD
1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
300GB HDD
1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
450GB HDD
1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
600GB HDD
1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
900GB HDD
1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
73.2GB HDD
1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
146.5GB HDD
1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
300GB HDD
1 x 300 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
160GB HDD
1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm
100GB SSD
1 x 100 GB, 2.5-inch, SATA2
N8103-130
RAID BBU
Recommended
Cable
Required
HDD Cage
Optional HDD Cage
Required
HDD
5 slots
available
SAS
SATA
SSD
N8103-121
K410-180(00)
(Standard)
N8154-37
N8150-374
N8150-375
N8150-376
N8150-377
N8150-332
N8150-378
N8150-379
N8150-331
N8150-276
N8150-277
N8150-334
N8150-707
NOTE:



All hard drives within a RAID array should be of the same capacity and rotation speed.
SAS and SATA hard drives must be installed in separate HDD Cages.
No internal tape drive can be installed in the drive configuration.
NEC Corporation
Revision 1.0, February 2012
22
4.2.13 Up to five 2.5-inch Drive with RAID 5/6 Controller with 512 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller(512MB, RAID0/1/5/6)
Promise SuperTrak EX8760T-512
RAID 0/1/5/6/10/50, 512MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s,
SATA 3Gb/s, LP / FH
RAID Battery Backup Unit
for Promise SuperTrak EX8760T
Internal SAS/SATA Cable
1x mini-SAS to 4x fixed SAS
2.5-inch HDD Cage
3 x 2.5-inch hot plug hard drive bays
Additional 2.5-Inch HDD Cage
2x 2.5-inch hot plug hard drive bays
Including 1x mini-SAS to 1x mini-SAS cable
146.5GB HDD
1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
300GB HDD
1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
450GB HDD
1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
600GB HDD
1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
900GB HDD
1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
73.2GB HDD
1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
146.5GB HDD
1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
300GB HDD
1 x 300 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
160GB HDD
1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm
100GB SSD
1 x 100 GB, 2.5-inch, SATA2
N8103-134
RAID BBU
Recommended
Cable
Required
HDD Cage
Optional HDD Cage
Required
HDD
5 slots
available
SAS
SATA
SSD
N8103-141
K410-180(00)
(Standard)
N8154-37
N8150-374
N8150-375
N8150-376
N8150-377
N8150-332
N8150-378
N8150-379
N8150-331
N8150-276
N8150-277
N8150-334
N8150-707
NOTE:



All hard drives within a RAID array should be of the same capacity and rotation speed.
SAS and SATA hard drives must be installed in separate HDD Cages.
No internal tape drive can be installed in the drive configuration.
NEC Corporation
Revision 1.0, February 2012
23
5 Internal Optical Drive
Available Bays: 1
Product Name / Description
Part Number
Slim DVD-ROM drive
(Standard)
Internal DVD Super Multi Drive
Slim DVD Super Multi drive, not including writing software
N8151-104F
NOTE:

To install internal DVD Super Multi drive, the standard DVD-ROM drive needs to be removed.
6 Internal Tape / RDX Drives
6.1
Tape / RDX Drive Selection
Refer to the section in accordance with your type of tape drives.
DAT
DAT72
RDX
USB
Refer to 6.2.1
USB
Refer to 6.2.2
NOTE:

No tape drive can be installed if you install the optional 2.5-inch HDD Cage.
6.2
Tape / RDX Configuration
6.2.1
DAT / USB
Category
Product Name / Description
Part Number
Controller
Internal USB Controller
1 x USB port or 1 x pin-header for front panel USB
Internal USB cable
1x Internal USB to 1x USB device
NOTE:
The cable is required to install USB tape drive only.
Internal USB cable
1x pin-header for front panel USB to 1x USB device and 1x front
panel USB port
NOTE:
The cable is required to install internal flash memory and USB
tape drive.
A USB tape drive occupies one front USB port.
(Standard)
Internal DAT (USB)
DDS3 / DDS4 / DAT72, Native capacity 36 GB
NOTE: DDS1 / DDS2 format are not supported
N8151-69
Cable
Required
Drive
1 bays available
NEC Corporation
Revision 1.0, February 2012
K410-255(00)
K410-245(00)
24
6.2.2
RDX
Category
Product Name / Description
Part Number
Controller
Internal USB Controller
1 x USB port or 1 x pin-header for front panel USB
Internal USB cable
1x Internal USB to 1x USB device
NOTE:
The cable is required to install USB tape drive only.
Internal USB cable
1x pin-header for front panel USB to 1x USB device and 1x front
panel USB port
NOTE:
The cable is required to install internal flash memory and USB
tape drive.
A USB tape drive occupies one front USB port.
(Standard)
Internal RDX (USB)
N8151-86
Cable
Required
Drive
1 bays available
K410-255(00)
K410-245(00)
7 Internal Flash Memory
Available socket: 1
Product Name / Description
Part Number
Internal Flash Memory
Internal flash memory to enable software and tools in the EXPRESSBUILDR DVD without
DVD media
NOTE:
Before use, software and tools must be copied from the EXPRESSBUILDER DVD to the
flash memory.
The following operations can be performed with the flash memory:
- Installation of Windows server with express setup
- Installation of Starter Pack—the package of NEC qualified drivers and system setting
tools
- Installation of NEC ESMPRO Agent and Universal RAID Utility
- Performance of the Test and Diagnosis Tool
N8115-05
NEC Corporation
Revision 1.0, February 2012
25
8 PCI Card
8.1
LAN Controller
Category
Product Name / Description
Part Number
LAN
1000BASE-T Adapter (2ch)
Broadcom NetXtreme II 5709 Dual port Network Interface Card
PCIe x4, LP / FH
NOTE:
Teaming and bonding features across the standard LAN and the
LAN controller are supported on Windows Server 2003R2 / 2008
/ 2008R2 and Red Hat Linux 5.x Operating system.
Up to 2 teams per system and 2 ports per team is supported in
the teaming and bonding feature.
N8104-134
8.2
Serial Port Adapter
Product Name / Description
Part Number
Serial port adapter
Serial port fixed to PCI bracket
N8117-01A
9 Other Add-in Components
9.1
Input Devices
Product Name / Description
Part Number
Keyboard and Mouse Pack (US)
1 x 104-keys White USB keyboard, 1 x USB White Optical Wheel Mouse
(Standard)
10 Add-on Components
10.1
Server Management License
The server integrates the EXPRESSSCOPE Engine 3 as standard. Refer to Server Management for the
standard management features. For more extensive remote KVM and remote media features, choose the
following kit.
Product Name / Description
Part Number
Remote KVM and Media License kit
N8115-04
License for one server.
Remote KVM and remote media are enabled regardless of OS status.
Remote KVM:
Displays a graphics console on the web browser of the remote terminal
(PC/server).
Controls keyboard and mouse via the remote terminals' web browser
Remote media:
Enables the user to use the CD / DVD / FD / Flash memory of the remote terminals
(PC/server) as if accessing the local drives.
NEC Corporation
Revision 1.0, February 2012
26
10.2
Dust / Insect Proof Kit
The server supports the dust resistant feature. Choose the following kit to install the system in dusty
places.
Category
Product Name / Description
Part Number
Front Bezel
Dust Proof Bezel with Sensor
Including 1 set of filter replacement sensors, 1 set of dust proof
filters
Dust proof filter (5 pcs.)
For N8146-19 Dust Proof filter
Removal capacity of particles : Up to 1 μm-sized
N8146-19
Filter
10.3
N8147-22
Flash FDD
Choose the Flash FDD if you need to prepare an alternative device for a floppy drive.
Product Name / Description
Part Number
Flash FDD
USB flash emulating USB floppy disk, Native capacity 1.44 MB
N8160-86
10.4
Medium and Cartridge
Category
Product Name
Drive supported
Part Number
RDX
RDX Cartridge (320GB)
N8151-86
N8152-26
RDX Cartridge (500GB)
N8151-86
N8152-27
RDX Cartridge (1TB)
N8151-86
N8152-33
DAT72(36GB) Medium 5 pack
N8151-69
N8152-08
DAT
NEC Corporation
Revision 1.0, February 2012
27
References
Note for Ordering
Parts number provided may be needed to modify by country/region when you order the products.
For example, the operable parts number for N8100-1738F in EMEA is N8100-1730F-O, adding "-O", the
country-specific identifier for EMEA, after the parts number.
Please consult our sales representative for your country identifier.
Server Management
The EXPRESSSCOPE Engine 3, integrated into the GT110d-S server, provides superior remote control
and system management features listed in the table below.
Standard
Hardware
monitoring
With Remote KVM
and Media License
kit
Temperature/voltage/power/
fan /degeneration (memory/hard drive)


Hardware event log collection


Boot monitoring
Booting, BIOS/POST stall, OS stall,
shutdown


Alerting
HW error, Boot error and OS panic
(by SNMP, E-Mail)


Remote KVM
POST/BIOS setup, DOS utility


(via LAN)
Panic screen, Boot screen


Text-based screen (OS console)


GUI-based screen (OS console)
-

Remote control
Remote reset/power on-off/ dump


(via LAN)
Configure power capping setting


Configure BIOS setting (items limited)


OS shutdown


Remote media (CD/DVD/FD)
-

Server Management Command Line
Protocol (DMTF compliant)


Remote control via Web browser
(without dedicated app)


Remote batch


Scheduling (without UPS)


Maintenance
Save/restore BIOS/BMC setting to/from a
dedicated flash memory


Others
Set automatic IP address via DNS/DHCP


Remote wakeup
Wake On LAN, Wake On Ring


Centralized
management
Industry standard
Monitoring and control of multiple servers


IPMI
2.0
2.0
NEC Corporation
Revision 1.0, February 2012
28
OS Support Matrix for PCI Cards
VMware ESXi 5.0
RHEL 6 x64
RHEL 6
RHEL 5 x64
RHEL 5
WS 2003R2 x64
WS 2003R2
WS 2008 x64
WS 2008
WS 2008R2
Part Number
Product Name
N8103-128
RAID Controller
         -
N8103-129
RAID Controller
         
N8103-130
RAID Controller
         
N8103-134
RAID Controller
         
N8104-134
1000BASE-T Adapter
         -
Supporting PCI Cards and Installable Slots
Part Number
Product Name
Slots
Remarks
Slot # :
#1
#2
#3
#4
PCI Slot:
x4
x4
x16
32-bit
Card height:
LP
Slot type:
x8
x8
x16
5V
Installable card length (mm) :
167
N8103-128
RAID Controller (128MB, RAID 0/1)
[PCIe 2.0 x8]

-
-
-
N8103-134
RAID Controller (512MB, RAID 0/1/5/6)
[PCIe 2.0 x8]

-
-
-
N8103-129
RAID Controller (256MB, RAID 0/1)
[PCIe 2.0 x8]

-
-
-
N8103-130
RAID Controller (256MB, RAID 0/1/5/6)
[PCIe 2.0 x8]

-
-
-
N8104-134
1000BASE-T Adapter(2ch)
[PCIe x4]



-
N8117-01A
Serial Port Adapter




NEC Corporation
Revision 1.0, February 2012
Max. 1
29
Copyright Notice and Liability Disclaimer
The information contained herein is subject to change without notice.
Microsoft and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries
Intel and Xeon are registered trademarks or trademarks of Intel Corporation or its subsidiaries in the United
States and other countries.
Linux is a trademark of Linus Torvalds.
Red Hat is a registered trademark of Red Hat, Inc. in the U.S.
All other products, brands, or trade names used in this document are trademarks or registered trademarks
of their respective holders.
NEC shall not be liable for technical or editorial errors or omissions contained herein.
For hard drive capacity measurements, 1 GB = 1 billion bytes. Actual formatted capacity is less.
The USB interface is not guaranteed to work properly for all USB devices.
NEC Corporation
Revision 1.0, February 2012
30
Revision History
Revision
Date
Description
1.0
February 13, 2011
Initial release
NEC Corporation
Revision 1.0, February 2012
31