COILCRAFT CS4050V-01L

Document 132
Current Sensing Transformers
These low cost Coilcraft current sensing transformers
are designed for use up to 100 kHz. They incorporate
the current and sense windings in one small, encapsulated package requiring minimum board space.
Varying the terminating resistance allows sensitivities of
1 to 100 Volts output per Ampere input.
Coilcraft current sensing transformers are designed to
provide 6 mm creepage/clearance between primary and
secondary windings
Applications include feedback control, overload sensing, detecting load drop or shutdown, and proportional
output.
Coilcraft Designer’s Kit P403 contains the three standard current sensing transformers, sensor-only versions
of each, plus two 50/60Hz current sensors. To order,
contact Coilcraft or visit http://order.coilcraft.com.
Part
number
Turns (N)
pri : sec
Inductance1
min (mH)
Frequency
range2
(kHz)
Sensed
current
range Iin
Terminating
resistance RT3
range (Ohms)
RT for
1 Vout
from 1 A Iin
CS4050V-01L
CS4100V-01L
CS4200V-01L
1 : 50
1 : 100
1 : 200
5
20
80
5 – 25
5 – 50
1 – 100
2 mA – 10 A
5 mA – 24 A
5 mA – 35 A
50 – 5000
100 – 10,000
200 – 20,000
50 Ohms
100 Ohms
200 Ohms
1.
2.
3.
4.
5.
Inductance is for the secondary, measured at 15.75 kHz, 1 Vrms.
Square wave response deteriorates above and below this frequency.
Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation: RT = Vout × Nsec / Iin
Operating temperature range –40°C to +85°C.
Electrical specifications at 25°C.
COILCRAFT
CS-4xxxV
906 xxx
0.75
Typical Circuit
2
I in
Pri
3
19,05
1
0.105/0.150
2,67/3,81
RT
Sec
Vout
CURRENT
4
2
1
0.069
1,76
0.20 ±0.005
5,08 ±0,125
CL
0.088
2,23
3
CL
SENSE
0.03
0,76
0.77
max
19,56
0.30 ±0.005
7,62 ±0,125
4
Recommended
PC Board Layout
3
0.40 ±0.01
10,16 ±0,25
0.57
max
14,48
4
0.041
1,041
0.052
1,321
1
2
0.060 × 0.460
1,52 × 11,68
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2008
max
Weight:
8.8 – 9.3 g
Terminations: Tin-silver over copper
Packaging:
28 per tube
Document 132
Revised 03/20/07