1 2 3 4 5 TECHNICAL CHARACTERISTICS MATERIAL INSULATOR: PA 9T FLAMABILITY RATING: UL94-V0 COLOR: BLACK CONTACT MATERIAL: COPPER ALLOY CONTACT TYPE: STAMPED SHIELDING: BRASS NI PLATED PLATING: - CENTER PIN: GOLD - SHUNT TERMINAL: TIN - TIP SPRING: TIN QUALITY CLASS: 5000 MATING CYLCES A ENVIRONMENTAL OPERATING TEMPERATURE: -40°C UP TO +85°C COMPLIANCE: LEAD FREE AND ROHS PCB LAYOUT - COMPONENT VIEW TOLERANCE ± 0.05 ELECTRICAL CURRENT RATING: 5.5 A WORKING VOLTAGE: 20 VDC INSULATION RESISTANCE: >100 MΩ DIELECTRIC WITHSTANDING VOLTAGE: 500 VAC/MIN CONTACT RESISTANCE: 30 mΩ max B SOLDERING JEDEC LEAD FREE WAVE SOLDERING PROCESS PACKAGING TAPE & REEL C RoHS Compliant PROJECTION: G F E D C APPROVAL: RJ B GENERAL TOLERANCE X = +/- 0.50 .X = +/- 0.30 .XX = +/- 0.20 UNIT: MM DESCRIPTION: DC POWER JACK - RIGHT ANGLED - THT - 1.65Ø SIZE WERI PART NO: 694 105 309 102 A4 SCALE: A 08-SEP-14 PDF AS SHEET: 1/3 REV DATE FILE BY DRAW: AS D 1 2 3 4 5 Unreeling direction 320 pcs A COVER G.P.PASS 320 pcs/reel 10 reels/carton 3200pcs/carton B C Unreeling direction RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: RJ B UNIT: MM DESCRIPTION: DC POWER JACK - RIGHT ANGLED - THT - 1.65Ø SIZE WERI PART NO: 694 105 309 102 A4 SCALE: A 23-JUL-14 PDF AS SHEET: 2/3 REV DATE FILE BY DRAW: AS D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 3/3 REV DATE FILE BY DRAW: QL D