Plastic Packages for Integrated Circuits Package Outline Drawing L32.4x4A 32 LEAD QUAD FLAT NO-LEAD PLASTIC PACKAGE Rev 5, 2/16 6 PIN 1 INDEX AREA 4.00 ±0.05 A B 8X 0.36 8X 0.179 2.80 28X 0.40 6 PIN #1 INDEX AREA (4X) 2.65 4.00 ±0.05 8X 0.179 0.15 24X 0.40 4 TOP VIEW 32X 0.20 0.10 M C A B BOTTOM VIEW (3.80) (2.80) SEE DETAIL “X” 0.90 ±0.10 // 0.10 C BASE PLANE C SEATING PLANE 0.08 C (2.65) (3.80) SIDE VIEW (28X 0.40) C (32X 0.20) 0.2 REF (32X 0.60) TYPICAL RECOMMENDED LAND PATTERN 5 0.00 MIN 0.05 MAX DETAIL “X” NOTES: 1. Dimensions are in millimeters. Dimensions in ( ) for Reference Only. 2. Dimensioning and tolerancing conform to ASME Y14.5m-1994. 3. Unless otherwise specified, tolerance: Decimal ±0.05 4. Dimension applies to the metallized terminal and is measured between 0.15mm and 0.25mm from the terminal tip. 5. Tiebar shown (if present) is a non-functional feature. 6. The configuration of the pin #1 identifier is optional, but must be located within the zone indicated. The pin #1 identifier may be either a mold or mark feature. 1