Specs

JFW Industries, Inc.
Phone: 317-887-1340
[email protected]
www.jfwindustries.com
SPECIFICATION SHEET
JFW MODEL 50SA-455
SWITCH ASSEMBLY
Frequency Range
2-6 GHz
Configuration/Notes
8 individually controlled 1P4T self-terminating
solid-state RF switches
(Valid port settings: 1, 2, 3, 4)
(RF switches have no all off state)
Enclosure Type
19 inch rack mount @ 2RU high
Startup/Default States
(configurable)
RF switches to port J1 at startup (see SWITCH command)
DHCP enabled (see NET command)
4 Ethernet users (see NET command)
Prompts off (see PROMPT command)
Impedance
50 Ohms nominal
VSWR
1.6:1 typical / 2.0:1 maximum
Insertion Loss
3.0 dB typical / 4.0 dB maximum
Isolation
95 dB typical / 80 dB minimum
RF Input Power
+20 dBm maximum
Switching Speed
500 nanoseconds typical
(after command is received and processed)
(typical processing time is 3 milliseconds)
Manual Control
20-Button Keypad and LCD display
(IP Address configurable via keypad)
(Net mask configurable via keypad)
(Gateway configurable via keypad)
(Baud rate configurable via keypad)
Control
Ethernet (DHCP, TCP/IP, 10/100, up to 12 users)
RS-232 (up to 115200 Baud)
Command Set
RF Switch Control Commands:
Switch, Set Switch, Read Switch, Set All Switches,
Read All Switches
System Commands:
Help, Identification, Store, Recall, Pause, Net,
Serial, Close, Disconnect, MOTD, Date, Message,
Restrict, IDENT, Name, Show Users, Reboot, Uptime,
Prompt
--CONTINUED-Page 1 of 2
JFW FORM E-7-F REV F
JFW Industries, Inc.
Phone: 317-887-1340
[email protected]
www.jfwindustries.com
SPECIFICATION SHEET
JFW MODEL 50SA-455
SWITCH ASSEMBLY
AC Supply
100-240 VAC @ 47-63 Hz
2 Amp 5x20mm "Slo-Blo" AC fuse
Littelfuse #215-002, JFW #025-021
RF Connectors
SMA female
Operating Temperature Range
0º to +65º C
Physical Size
See outline drawing 092-7908
ECR/ECN #
DATE
REV
01/08/2014
24250
Page 2 of 2
06/16/2014
APPR / DATE
ECR/ECN #
BAC 01/08/2014
A
BAC 06/16/2014
JFW FORM E-7-F REV F
DATE
REV
APPR / DATE