JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 75SA-035 SWITCH ASSEMBLY Frequency Range DC-1000 MHz Configuration 1P8T self-terminating electro-mechanical RF switch Enclosure Type 19 inch rack mount @ 2RU high Startup/Default States (configurable) RF switch off at startup (see SWITCH command) DHCP enabled (see NET command) 4 Ethernet users (see NET command) Prompts off (see PROMPT command) All of these default settings can be changed by user. Unit can be configured for up to 12 Ethernet users Impedance 75 Ohms nominal VSWR 1.4:1 maximum Insertion Loss 1.5dB maximum Isolation 85dB typical 80dB minimum RF Input Power +20 dBm Switching Speed 10 milliseconds Manual Control 20-Button Keypad and LCD display (IP Address configurable via keypad) (Net mask configurable via keypad) (Gateway configurable via keypad) (Baud rate configurable via keypad) Remote Control Ethernet (DHCP, TCP/IP, 10/100, up to 12 users) RS-232 (up to 115200 Baud) Remote Commands RF Switch Control Commands: Switch, Set Switch, Read Switch System Commands: Help, Identification, Store, Recall, Pause, Net, Serial, Close, Disconnect, MOTD, Date, Message, Restrict, IDENT, Name, Show Users, Reboot, Uptime, Prompt AC Supply 100-240 VAC @ 47-63 Hz RF Connector BNC or F female Operating Temperature Range 0º to +50º C Physical Size See outline drawing 092-5751 ECR/ECN # DATE REV 04/01/2008 Page 1 of 1 APPR / DATE ECR/ECN # BAC 04/01/2008 15921 05/28/2008 A CLK 05/28/2008 24239 06/17/2015 B TRS 06/17/2015 JFW FORM E-7-F REV F DATE REV APPR / DATE