JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50S-1820 1P2T SOLID STATE RF SWITCH Frequency Range 800-2700 MHz Configuration 1P2T Impedance 50 Ohms nominal VSWR 1.4:1 maximum Insertion Loss 0.60 1.00 0.80 1.20 Isolation 75 65 70 60 Switching Speed 10 microseconds maximum 6 microseconds typical (50% TTL to 10% or 90% RF) RF Input Power (Cold Switched) 100 Watts average (-20ºC to +50ºC) 75 Watts average (+50º to +70ºC) RF Input Power (Hot Switched) 30 Watts average (-20ºC to +70ºC) Spurious Noise (Out-of-band) This switch shall produce: < -73dBm (100-800MHz) < -50dBm (1-100MHz) dB dB dB dB dB dB dB dB typical maximum typical maximum typical minimum typical minimum 800-2000 MHz 800-2000 MHz 2000-2700 MHz 2000-2700 MHz 800-2000 MHz 800-2000 MHz 2000-2700 MHz 2000-2700 MHz This is to be tested on the common port with J1 and J2 terminated into 50 Ohms. Control (1 line) TTL "Low" Common to J1 TTL "High" Common to J2 DC Supply +15 Vdc @ 80 mA nominal and +5 Vdc @ 40 mA nominal RF Connector BNC, SMA, TNC or N female Operating Temperature Range -20ºC to +70ºC Storage Temperature Range -55ºC to +85ºC --CONTINUED-Page 1 of 2 JFW FORM E-7-F REV F JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50S-1820 1P2T SOLID STATE RF SWITCH Shock This unit is designed to meet MIL-STD202G, Method 213, Test Condition J (30g's, 11ms, 18 shocks in each axis) (Verification of this specification is to be confirmed by the customer. JFW does not test for this specification.) Vibration This unit is designed to meet MIL-STD202G, Method 214A, Condition 1, Test Condition Letter C. Verification of this specification is to be confirmed by the customer. JFW does not test for this specification. Physical Size ECR/ECN # Page 2 of 2 See outline drawing 092-5197 DATE 03/04/2009 REV APPR / DATE BAC 03/04/2009 17072 04/10/2009 A BAC 04/10/2009 17589 08/20/2009 B BAC 08/20/2009 ECR/ECN # DATE 19334 10/28/2010 JFW FORM E-7-F REV F REV C APPR / DATE BAC 10/28/2010