JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50PD-698 2 WAY REACTIVE POWER DIVIDER/COMBINER Frequency Range 700-3000 MHz Impedance 50 Ohms nominal VSWR 1.5:1 maximum < 1.4:1 typical Insertion Loss (above 3 dB split) 1.7 dB maximum 0.18 dB typical @ 700 MHz 1.33 dB typical @ 3000 MHz Amplitude Tracking ± 0.5 dB maximum ± 0.26 dB typical Phase Tracking ± 5º maximum ± 2º typical Isolation 20 dB minimum RF Input Power* 100 Watts average (divider) 25 Watts average per port (combiner) Optional Heatsink* JFW #036-2977 (see outline drawing 092-7955) RF Connector SMA or N female Temperature Range -40ºC to +85ºC (operating) -55ºC to +85ºC (storage) Operating Altitude up to 40,000ft Humidity up to 95% relative humidity (non-condensing) Shock Unit designed to meet but not tested to MIL-STD-202G, Method 213, Test Condition J (30g's, 11ms, 18 shocks in each axis) Vibration Unit designed to meet but not tested to MIL-STD-202G, Method 214A, Condition 1, Test Condition Letter C Physical Size See outline drawing 092-2502 * If combining two signals that are greater than 20 Watts average, an external heatsink may be required to keep the case temperature under 100ºC. ECR/ECN # DATE REV 05/27/2009 Page 1 of 1 APPR / DATE ECR/ECN # DATE REV APPR / DATE TRS 05/27/2009 23878 03/14/2014 C TRS 03/14/2014 26539 04/12/2016 D TRS 04/12/2016 18215 01/29/2010 A TRS 01/29/2010 22514 02/14/2013 B TRS 02/14/2013 JFW FORM E-7-F REV F