JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50PMA-110 TRANSCEIVER TEST SYSTEM Frequency Range 30-3000 MHz Configuration 40 Port LC16 Limited Fan-out Transceiver Test System (see 092-8614 for block diagram) (see 092-8615 for attenuator address chart) (all ports are bi-directional) (the ADMIN password is located on rear panel) Limited Fan-out Description 40 Port LC16 means that each of the 32 ports is connection limited to only its 16 neighboring ports. See 092-8615 for a connection example and the chart for all internal connections through the matrix. Enclosure Type 19 inch rack mount @ 23RU high Impedance 50 Ohms nominal Attenuation Range 0-95 dB in 1 dB steps Startup/Default States (configurable) Attenuators to 95dB at startup (see ATTEN command) DHCP enabled (see NET command) 4 Ethernet users (see NET USERS command) Prompts off (see PROMPT command) All of these default settings can be changed by user. Unit can be configured for up to 12 Ethernet users. VSWR 1.8:1 maximum Attenuation Accuracy ± 0.50 dB 1-7dB ± 1.00 dB 8-11dB ± 1.25 or 3% 12-95dB (whichever is greater) (guaranteed monotonic) Insertion Loss 45.7 dB typical 49.1 dB maximum Power Divider Isolation 20 dB minimum RF Input Power 1 Watt average Switching Speed 2 microseconds (after command is received and processed) (3 milliseconds typial processing time) Manual Control 20-Button Keypad and LCD display (IP Address configurable via keypad) (Net mask configurable via keypad) (Gateway configurable via keypad) (Baud rate configurable via keypad) Remote Control Ethernet (DHCP, TCP/IP, 10/100, up to 12 users) RS-232 (up to 115200 Baud) --CONTINUED-Page 1 of 2 JFW FORM E-7-F REV F JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50PMA-110 TRANSCEIVER TEST SYSTEM Remote Commands Attenuator Control Commands: Atten, Set Path, Read Path, Read All Paths, Set Attenuator, Read Attenuator, Set All Attenuators, Read All Attenuators, Read All Extended, Fade Attenuator, Variable Attenuator Handover, Block, Set Block, Read Block, Read All Blocks, Fade Block, Variable Block Handover System Commands: Help, Identification, Store, Recall, Pause, Net, Serial, Close, Disconnect, MOTD, Date, Message, Restrict, IDENT, Name, Show Users, Reboot, Uptime, Prompt RF Connector N, SMA or TNC female Operating Temperature Range 0ºC to +50ºC AC Supply 100-240 VAC @ 47-63 Hz Outline Drawing Number 092-8613 (50PMA-110 SMA) ECR/ECN # DATE 04/25/2016 Page 2 of 2 REV APPR / DATE ECR/ECN # TRS 04/25/2016 JFW FORM E-7-F REV F DATE REV APPR / DATE