6073200006en

Technical Data
Safety switch
Series SKT - ASI – with separate actuator
Description
Article number
ASI SKT
6073200006
Operating symbol
Fixierte Positionierung für
Sicherheitsanwendungen
Befestigungsschraube
nach DIN 912 M5
Operating diagram
Actuator
withdrawn
inserted
ON
OFF
Tolerances
Operating point: ± 0,25 mm;
Operating force: ± 10%
Electrical data
Operating voltage
Operating current
AS-i Specifications
AS-i Inputs
Parameter bits
AS-i Address
U
I
26,5 … 31,6 V; via AS-interface, reverse-polarity proof
< 30mA
Profile S-0.B
IO-Code: 0x0
ID-Code: 0xB
ID-Code1: 0xF
ID-Code2: 0xE
Contact 1: Date bits D0/D1 = static 00
or dynamic code transmission
Contact 2: Date bits D2/D3 = static 00
or dynamic code transmission
no function
preset address: 0
This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims
for defects on account of possible variations of the actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications
subject to change without notice!
Date of issue: 07.09.2009 / Page 1 of 2
Document : 6073200006_en / Last update: 2 / 2433-09
Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica / www.bernstein.eu
Vorlage : 0850174285 Orig. 2
Technical Data
Safety switch
Mechanical data
Enclosure
Cover
Indication
Actuator
Ambient air temperature
Contact type
Mechanical life
Mechanical life, extended actuation force
Switching frequency
Assembly
Safety switch
Actuator
Connection
Plug connection
Weight
Installation position
Protection type
Thermoplastic, glass fibre reinforced (UL94-V0)
Thermoplastic, glass fibre reinforced (UL94-V0)
LEDs for slave and bus state
Separate actuator (St-stainless steel)
-25° C … +70° C
2 NC (slow-action, Zb)
1 x 106 switch operations
1 x 105 switch operations
≤ 30 / min.
2 x M4 or M5
2 x M4 (enclosed)
Plug connector M12 male
1: AS-i +
2: free
3: AS-i 4: free
≈ 0,08 kg
Operator definable
IP65 acc. to IEC/EN 60529
Actuation
To achieve the 8 different actuator points please follow
the next instructions
(1) pull fixing clamp
(2) turn actuator
(3) push fixing clamp
Standards
VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1
EN 50295, EN ISO 13849-1
EU Conformity
acc. to EMC Directive
Safety Classification
according 13849-1 to PL e
MTTFd = high
PFD
= 2,49 * 10-10
Notes
The degree of protection specified (IP code) applies only to a properly closed cover and the use of an equivalent
connector.
The switch may not be used as a mechanical stop.
Tapped holes not in use must be closed with blind plugs.
This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims
for defects on account of possible variations of the actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications
subject to change without notice!
Date of issue: 07.09.2009 / Page 2 of 2
Document : 6073200006_en / Last update: 2 / 2433-09
Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica / www.bernstein.eu
Vorlage : 0850174285 Orig. 2
Similar pages