6073201052en

Technical Data
Plastic bodied limit switch
Series BI2
Description
ASI BI2 W
Article number
6073201052
Operating symbol
Operating diagram
LED, GN
LED, RD
On
Off
Tolerance:
Operating point ± 0,25 mm;
Actuating force ± 10 %
Fixed positioning for safety applications
Mounting screw M5 according to DIN 912 or
DIN EN ISO 4762
This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims
for defects on account of possible variations of the actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications
subject to change without notice!
Date of issue: 09.06.2011 / Page 1 of 2
Document : 6073201052_en / Last update : 1 / 2366-11
Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica / www.bernstein.eu
Vorlage : 0850174281 Orig. 1
Technical Data
Plastic bodied limit switch
Electrical data
Operating voltage
Operating current
AS-i Specifications
AS-i Inputs
Parameter bits
AS-i Address
Mechanical data
Enclosure
Cover
Indication
Actuator
Ambient air temperature
Contact type
Mechanical life
Switching frequency
Assembly
Connection
Plug connection
Weight
Installation position
Protection type
U
I
26,5 … 31,6 V; via AS-interface, reverse-polarity proof
< 30 mA
Profile S-0.B
IO-Code: 0x0
ID-Code: 0xB
ID-Code1: 0xF
ID-Code2: 0xE
Contact 1: Date bits D0/D1 = static 00
or dynamic code transmission
Contact 2: Date bits D2/D3 = static 00
or dynamic code transmission
no function
preset address: 0
Thermoplastic, glass fibre reinforced
Thermoplastic, glass fibre reinforced
LEDs for slave and bus state
Lever (thermoplastic)
-25° C … +70° C
2 NC (slow-action, Zb)
1 x 106 switching cycles
≤ 100 / min
2 x M4 / 2 x M5 / 2 x M3 front mounting
Plug connector M12 male
1: AS-i +
2: free
3: AS-i 4: free
≈ 0,15 kg
operator definable
IP65 acc. to EN 60529; DIN VDE 0470 T1
Actuation
The push bolt actuator is mainly intended to be actuated along it’s axis.
Side actuation will considerably reduce switch life.
Standards
VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1
EN 50295, EN ISO 13849-1
EU Conformity
acc. to EMC Directive
Safety Classification
according 13849-1 to PL e
MTTFd = high
PFD
= 2,49 * 10-10
Notes
The degree of protection specified (IP code) applies only to a properly closed cover and the use of an equivalent
connector.
This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims
for defects on account of possible variations of the actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications
subject to change without notice!
Date of issue: 09.06.2011 / Page 2 of 2
Document : 6073201052_en / Last update : 1 / 2366-11
Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica / www.bernstein.eu
Vorlage : 0850174281 Orig. 1
Similar pages