F9153

SAW Bandpass Filter F9153
Features
RF bandpass filter
Usable bandwidth 5MHz
High attenuation
No matching 50Ω single-ended operation
Ceramic Surface Mounted Device Package ( 3.0 mm × 3.0 mm )
RoHS compliant
Package Dimensions
1
2
I
9153
915
3
3
6
6
1
5
5
2
4
4
3
Dimensions shown are nominal in millimeters
Pin Configurations
Body : Al2O3 Ceramic
Lid : Kovar, Ni Plated
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um
Ni Plating
2
Input
5
Output
1, 3, 4, 6
Case ground
Maximum Ratings
Parameters
Unit
Minimum
Typical
Maximum
Operating Temperature Range
°C
-40
25
85
Storage Temperature Range
°C
-45
25
85
Power Handling Capability
dBm
15
Electrostatics Sensitive Device (ESD)
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F9153
Rev. Date
2010-03-15
Rev.
NR8011-AS03
1/7
SAW Bandpass Filter F9153
Specifications
Minimum
Typical
Maximum
Unit
Center Frequency ( Fc )
-
915
-
MHz
Insertion Loss (In Fc ±2.5 MHz)
-
2.5
3.5
dB
Amplitude Ripple (In Fc ±2.5 MHz)
-
0.5
1.0
dB
VSWR (In Fc ±2.5 MHz)
-
1.5
2.0
40
30
35
25
50
40
40
30
-
Relative Attenuation
0.3 MHz ~ 840 MHz
869 MHz ~ 894 MHz
970 MHz ~ 1500 MHz
1500 MHz ~ 3000 MHz
Input/Output Impedance
dB
50
Ohm
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F9153
Rev. Date
2010-03-15
Rev.
NR8011-AS03
2/7
SAW Bandpass Filter F9153
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input
50Ω
Output
50Ω
Marking Configuration
1)
I 2)
91533)
1) Pad Number 1 Index
2) Manufacturer name
3) Marking Number
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F9153
Rev. Date
2010-03-15
Rev.
NR8011-AS03
3/7
SAW Bandpass Filter F9153
Frequency Response
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F9153
Rev. Date
2010-03-15
Rev.
NR8011-AS03
4/7
SAW Bandpass Filter F9153
Input / Output VSWR Charts
Input / Output Smith Charts
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F9153
Rev. Date
2010-03-15
Rev.
NR8011-AS03
5/7
SAW Bandpass Filter F9153
Packing Specification
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel )
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
0~15 degree
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Carrier tape
Part No.
F9153
Rev. Date
2010-03-15
Rev.
NR8011-AS03
6/7
SAW Bandpass Filter F9153
Carrier Tape Dimensions [unit : mm]
A
3.40 ± 0.1
B
3.40 ± 0.1
C
7.25 ± 0.1
D
1.70 ± 0.1
E
12.00 ± 0.1
F
8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F9153
Rev. Date
2010-03-15
Rev.
NR8011-AS03
7/7