KTY81 series Silicon temperature sensors Rev. 05 — 25 April 2008 Product data sheet 1. Product profile 1.1 General description The temperature sensors in the KTY81 series have a positive temperature coefficient of resistance and are suitable for use in measurement and control systems. The sensors are encapsulated in the SOD70 2 in-line leads plastic package. Other special selections are available on request. CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling. 1.2 Features n High accuracy and reliability n Positive temperature coefficient; fail-safe behavior n Long-term stability n Virtually linear characteristics 1.3 Quick reference data Table 1. Quick reference data Tamb = 25 °C; in liquid; unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit R25 sensor resistance Isen(cont) = 1 mA KTY81/110 990 - 1010 Ω KTY81/120 980 - 1020 Ω KTY81/121 980 - 1000 Ω KTY81/122 1000 - 1020 Ω KTY81/150 950 - 1050 Ω KTY81/210 1980 - 2020 Ω KTY81/220 1960 - 2040 Ω KTY81/221 1960 - 2000 Ω KTY81/222 2000 - 2040 Ω KTY81/250 1900 - 2100 Ω KTY81 series NXP Semiconductors Silicon temperature sensors 2. Pinning information Table 2. Pinning Pin Description Simplified outline 1 electrical contact 2 electrical contact 2 1 3. Ordering information Table 3. Ordering information Type number KTY81/110 Package Name Description Version - plastic near cylindrical single-ended package; 2 in-line leads SOD70 KTY81/120 KTY81/121 KTY81/122 KTY81/150 KTY81/210 KTY81/220 KTY81/221 KTY81/222 KTY81/250 4. Marking Table 4. Marking codes Type number Marking code KTY81/110 110 KTY81/120 120 KTY81/121 121 KTY81/122 122 KTY81/150 150 KTY81/210 210 KTY81/220 220 KTY81/221 221 KTY81/222 222 KTY81/250 250 KTY81_SER_5 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 05 — 25 April 2008 2 of 15 KTY81 series NXP Semiconductors Silicon temperature sensors 5. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit Isen(cont) continuous sensor current in free air; Tamb = 25 °C - 10 mA Tamb ambient temperature in free air; Tamb = 150 °C - 2 mA −55 +150 °C 6. Characteristics Table 6. Characteristics Tamb = 25 °C; in liquid; unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit R25 sensor resistance Isen(cont) = 1 mA KTY81/110 990 - 1010 Ω KTY81/120 980 - 1020 Ω KTY81/121 980 - 1000 Ω KTY81/122 1000 - 1020 Ω KTY81/150 950 - 1050 Ω KTY81/210 1980 - 2020 Ω KTY81/220 1960 - 2040 Ω KTY81/221 1960 - 2000 Ω KTY81/222 2000 - 2040 Ω KTY81/250 1900 - 2100 Ω - 0.79 - %/K TC temperature coefficient R100/R25 resistance ratio Tamb = 100 °C and 25 °C 1.676 1.696 1.716 R−55/R25 resistance ratio Tamb = −55 °C and 25 °C 0.480 0.490 0.500 ∆R25 drift of sensor resistance at 25 °C 10000 h continuous operation; Tamb = 150 °C - 1.6 - Ω KTY81/1 series - 3.2 - Ω in still air [1] - 30 - s in still liquid [1] - 5 - s in flowing liquid [1] - 3 - s KTY81/2 series τth [1] thermal time constant The thermal time constant is the time taken for the sensor to reach 63.2 % of the total temperature difference. For example, if a sensor with a temperature of 25 °C is moved to an environment with an ambient temperature of 100 °C, the time for the sensor to reach a temperature of 72.4 °C is the thermal time constant. KTY81_SER_5 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 05 — 25 April 2008 3 of 15 KTY81 series NXP Semiconductors Silicon temperature sensors Table 7. Ambient temperature, corresponding resistance, temperature coefficient and maximum expected temperature error for KTY81/110 and KTY81/120 Isen(cont) = 1 mA. Ambient temperature (°C) (°F) Temperature KTY81/110 coefficient (%/K) Resistance (Ω) KTY81/120 Min Typ Max Temperature Resistance (Ω) error (K) Min Typ Max Temperature error (K) −55 −67 0.99 475 490 505 ±3.02 470 490 510 ±4.02 −50 −58 0.98 500 515 530 ±2.92 495 515 535 ±3.94 −40 −40 0.96 552 567 582 ±2.74 547 567 588 ±3.78 −30 −22 0.93 609 624 638 ±2.55 603 624 645 ±3.62 −20 −4 0.91 669 684 698 ±2.35 662 684 705 ±3.45 −10 14 0.88 733 747 761 ±2.14 726 747 769 ±3.27 0 32 0.85 802 815 828 ±1.91 793 815 836 ±3.08 10 50 0.83 874 886 898 ±1.67 865 886 907 ±2.88 20 68 0.80 950 961 972 ±1.41 941 961 982 ±2.66 25 77 0.79 990 1000 1010 ±1.27 980 1000 1020 ±2.54 30 86 0.78 1029 1040 1051 ±1.39 1018 1040 1061 ±2.68 40 104 0.75 1108 1122 1136 ±1.64 1097 1122 1147 ±2.97 50 122 0.73 1192 1209 1225 ±1.91 1180 1209 1237 ±3.28 60 140 0.71 1278 1299 1319 ±2.19 1265 1299 1332 ±3.61 70 158 0.69 1369 1392 1416 ±2.49 1355 1392 1430 ±3.94 80 176 0.67 1462 1490 1518 ±2.8 1447 1490 1532 ±4.3 90 194 0.65 1559 1591 1623 ±3.12 1543 1591 1639 ±4.66 100 212 0.63 1659 1696 1733 ±3.46 1642 1696 1750 ±5.05 110 230 0.61 1762 1805 1847 ±3.83 1744 1805 1865 ±5.48 120 248 0.58 1867 1915 1963 ±4.33 1848 1915 1982 ±6.07 125 257 0.55 1919 1970 2020 ±4.66 1899 1970 2040 ±6.47 130 266 0.52 1970 2023 2077 ±5.07 1950 2023 2097 ±6.98 140 284 0.45 2065 2124 2184 ±6.28 2043 2124 2205 ±8.51 150 302 0.35 2145 2211 2277 ±8.55 2123 2211 2299 ±11.43 KTY81_SER_5 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 05 — 25 April 2008 4 of 15 KTY81 series NXP Semiconductors Silicon temperature sensors Table 8. Ambient temperature, corresponding resistance, temperature coefficient and maximum expected temperature error for KTY81/121 and KTY81/122 Isen(cont) = 1 mA. Ambient temperature (°C) (°F) Temperature KTY81/121 coefficient (%/K) Resistance (Ω) KTY81/122 Min Typ Max Temperature Resistance (Ω) error (K) Min Typ Max Temperature error (K) −55 −67 0.99 471 485 500 ±3.02 480 495 510 ±3.02 −50 −58 0.98 495 510 524 ±2.92 505 520 535 ±2.92 −40 −40 0.96 547 562 576 ±2.74 558 573 588 ±2.74 −30 −22 0.93 603 617 632 ±2.55 615 630 645 ±2.55 −20 −4 0.91 662 677 691 ±2.35 676 690 705 ±2.35 −10 14 0.88 726 740 754 ±2.14 741 755 769 ±2.14 0 32 0.85 794 807 820 ±1.91 810 823 836 ±1.91 10 50 0.83 865 877 889 ±1.67 883 895 907 ±1.67 20 68 0.80 941 951 962 ±1.41 960 971 982 ±1.41 25 77 0.79 980 990 1000 ±1.27 1000 1010 1020 ±1.27 30 86 0.78 1018 1029 1041 ±1.39 1039 1050 1062 ±1.39 40 104 0.75 1097 1111 1125 ±1.64 1120 1134 1148 ±1.64 50 122 0.73 1180 1196 1213 ±1.91 1204 1221 1238 ±1.91 60 140 0.71 1266 1286 1305 ±2.19 1291 1312 1332 ±2.19 70 158 0.69 1355 1378 1402 ±2.49 1382 1406 1430 ±2.49 80 176 0.67 1447 1475 1502 ±2.8 1477 1505 1533 ±2.8 90 194 0.65 1543 1575 1607 ±3.12 1574 1607 1639 ±3.12 100 212 0.63 1642 1679 1716 ±3.46 1676 1713 1750 ±3.46 110 230 0.61 1745 1786 1828 ±3.83 1780 1823 1865 ±3.83 120 248 0.58 1849 1896 1943 ±4.33 1886 1934 1982 ±4.33 125 257 0.55 1900 1950 2000 ±4.66 1938 1989 2041 ±4.66 130 266 0.52 1950 2003 2056 ±5.07 1989 2044 2098 ±5.07 140 284 0.45 2044 2103 2162 ±6.28 2085 2146 2206 ±6.28 150 302 0.35 2124 2189 2254 ±8.55 2167 2233 2299 ±8.55 KTY81_SER_5 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 05 — 25 April 2008 5 of 15 KTY81 series NXP Semiconductors Silicon temperature sensors Table 9. Ambient temperature, corresponding resistance, temperature coefficient and maximum expected temperature error for KTY81/150 Isen(cont) = 1 mA. Ambient temperature (°C) −55 (°F) −67 Temperature KTY81/150 coefficient Resistance (Ω) (%/K) Min Typ Max Temperature error (K) 0.99 524 ±7.04 456 −50 −58 0.98 479 515 550 ±6.99 −40 −40 0.96 530 567 605 ±6.91 −30 −22 0.93 584 624 663 ±6.84 −20 −4 0.91 642 684 725 ±6.77 −10 14 0.88 703 747 791 ±6.69 0 32 0.85 769 815 861 ±6.61 10 50 0.83 838 886 934 ±6.51 20 68 0.80 912 961 1010 ±6.41 25 77 0.79 950 1000 1050 ±6.35 30 86 0.78 987 1040 1093 ±6.55 40 104 0.75 1064 1122 1181 ±6.97 50 122 0.73 1143 1209 1274 ±7.4 60 140 0.71 1226 1299 1371 ±7.85 70 158 0.69 1313 1392 1472 ±8.31 80 176 0.67 1402 1490 1577 ±8.79 90 194 0.65 1495 1591 1687 ±9.29 100 212 0.63 1591 1696 1801 ±9.81 110 230 0.61 1690 1805 1919 ±10.4 120 248 0.58 1791 1915 2039 ±11.28 125 257 0.55 1840 1970 2099 ±11.91 130 266 0.52 1889 2023 2158 ±12.72 140 284 0.45 1980 2124 2269 ±15.21 150 302 0.35 2057 2211 2365 ±20.09 KTY81_SER_5 Product data sheet 490 © NXP B.V. 2008. All rights reserved. Rev. 05 — 25 April 2008 6 of 15 KTY81 series NXP Semiconductors Silicon temperature sensors Table 10. Ambient temperature, corresponding resistance, temperature coefficient and maximum expected temperature error for KTY81/210 and KTY81/220 Isen(cont) = 1 mA. Ambient temperature (°C) (°F) Temperature KTY81/210 coefficient (%/K) Resistance (Ω) KTY81/220 Min Typ Max Temperature Resistance (Ω) error (K) Min Typ Max Temperature error (K) −55 −67 0.99 951 980 1009 ±3.02 941 980 1019 ±4.02 −50 −58 0.98 1000 1030 1059 ±2.92 990 1030 1070 ±3.94 −40 −40 0.96 1105 1135 1165 ±2.74 1094 1135 1176 ±3.78 −30 −22 0.93 1218 1247 1277 ±2.55 1205 1247 1289 ±3.62 −20 −4 0.91 1338 1367 1396 ±2.35 1325 1367 1410 ±3.45 −10 14 0.88 1467 1495 1523 ±2.14 1452 1495 1538 ±3.27 0 32 0.85 1603 1630 1656 ±1.91 1587 1630 1673 ±3.08 10 50 0.83 1748 1772 1797 ±1.67 1730 1772 1814 ±2.88 20 68 0.80 1901 1922 1944 ±1.41 1881 1922 1963 ±2.66 25 77 0.79 1980 2000 2020 ±1.27 1960 2000 2040 ±2.54 30 86 0.78 2057 2080 2102 ±1.39 2036 2080 2123 ±2.68 40 104 0.75 2217 2245 2272 ±1.64 2194 2245 2295 ±2.97 50 122 0.73 2383 2417 2451 ±1.91 2359 2417 2475 ±3.28 60 140 0.71 2557 2597 2637 ±2.19 2531 2597 2663 ±3.61 70 158 0.69 2737 2785 2832 ±2.49 2709 2785 2860 ±3.94 80 176 0.67 2924 2980 3035 ±2.8 2894 2980 3065 ±4.3 90 194 0.65 3118 3182 3246 ±3.12 3086 3182 3278 ±4.66 100 212 0.63 3318 3392 3466 ±3.46 3284 3392 3500 ±5.05 110 230 0.59 3523 3607 3691 ±3.93 3487 3607 3728 ±5.61 120 248 0.53 3722 3817 3912 ±4.7 3683 3817 3950 ±6.59 125 257 0.49 3815 3915 4016 ±5.26 3775 3915 4055 ±7.31 130 266 0.44 3901 4008 4114 ±6 3861 4008 4154 ±8.27 140 284 0.33 4049 4166 4283 ±8.45 4008 4166 4325 ±11.46 150 302 0.20 4153 4280 4407 ±14.63 4110 4280 4450 ±19.56 KTY81_SER_5 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 05 — 25 April 2008 7 of 15 KTY81 series NXP Semiconductors Silicon temperature sensors Table 11. Ambient temperature, corresponding resistance, temperature coefficient and maximum expected temperature error for KTY81/221 and KTY81/222 Isen(cont) = 1 mA. Ambient temperature (°C) (°F) Temperature KTY81/221 coefficient (%/K) Resistance (Ω) KTY81/222 Min Typ Max Temperature Resistance (Ω) error (K) Min Typ Max Temperature error (K) −55 −67 0.99 941 970 999 ±3.02 960 990 1020 ±3.02 −50 −58 0.98 990 1019 1049 ±2.92 1010 1040 1070 ±2.92 −40 −40 0.96 1094 1123 1153 ±2.74 1116 1146 1176 ±2.74 −30 −22 0.93 1205 1235 1264 ±2.55 1230 1260 1290 ±2.55 −20 −4 0.91 1325 1354 1382 ±2.35 1352 1381 1410 ±2.35 −10 14 0.88 1452 1480 1508 ±2.14 1481 1510 1538 ±2.14 0 32 0.85 1587 1613 1640 ±1.91 1619 1646 1673 ±1.91 10 50 0.83 1730 1754 1779 ±1.67 1765 1790 1815 ±1.67 20 68 0.80 1882 1903 1924 ±1.41 1920 1941 1963 ±1.41 25 77 0.79 1960 1980 2000 ±1.27 2000 2020 2040 ±1.27 30 86 0.78 2037 2059 2081 ±1.39 2078 2100 2123 ±1.39 40 104 0.75 2195 2222 2250 ±1.64 2239 2267 2295 ±1.64 50 122 0.73 2360 2393 2426 ±1.91 2407 2441 2475 ±1.91 60 140 0.71 2531 2571 2611 ±2.19 2582 2623 2664 ±2.19 70 158 0.69 2710 2757 2804 ±2.49 2764 2812 2860 ±2.49 80 176 0.67 2895 2950 3005 ±2.8 2953 3009 3065 ±2.8 90 194 0.65 3086 3150 3214 ±3.12 3149 3214 3279 ±3.12 100 212 0.63 3285 3358 3431 ±3.46 3351 3426 3501 ±3.46 110 230 0.59 3488 3571 3655 ±3.93 3558 3643 3728 ±3.93 120 248 0.53 3684 3779 3873 ±4.7 3759 3855 3951 ±4.7 125 257 0.49 3776 3876 3976 ±5.26 3853 3955 4056 ±5.26 130 266 0.44 3862 3967 4073 ±6 3940 4048 4155 ±6 140 284 0.33 4009 4125 4241 ±8.45 4090 4208 4326 ±8.45 150 302 0.20 4112 4237 4363 ±14.63 4195 4323 4451 ±14.63 KTY81_SER_5 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 05 — 25 April 2008 8 of 15 KTY81 series NXP Semiconductors Silicon temperature sensors Table 12. Ambient temperature, corresponding resistance, temperature coefficient and maximum expected temperature error for KTY81/250 Isen(cont) = 1 mA. Ambient temperature (°C) −55 (°F) −67 Temperature KTY81/250 coefficient Resistance (Ω) (%/K) Min Typ Max Temperature error (K) 0.99 1049 ±7.04 911 −50 −58 0.98 959 1030 1101 ±6.99 −40 −40 0.96 1060 1135 1210 ±6.91 −30 −22 0.93 1168 1247 1327 ±6.84 −20 −4 0.91 1283 1367 1451 ±6.77 −10 14 0.88 1407 1495 1583 ±6.69 0 32 0.85 1538 1630 1721 ±6.61 10 50 0.83 1677 1772 1867 ±6.51 20 68 0.80 1824 1922 2021 ±6.41 25 77 0.79 1900 2000 2100 ±6.35 30 86 0.78 1974 2080 2185 ±6.55 40 104 0.75 2127 2245 2362 ±6.97 50 122 0.73 2287 2417 2547 ±7.4 60 140 0.71 2453 2597 2741 ±7.85 70 158 0.69 2626 2785 2943 ±8.31 80 176 0.67 2805 2980 3154 ±8.79 90 194 0.65 2990 3182 3374 ±9.29 100 212 0.63 3182 3392 3602 ±9.81 110 230 0.59 3379 3607 3836 ±10.65 120 248 0.53 3569 3817 4065 ±12.25 125 257 0.49 3658 3915 4173 ±13.45 130 266 0.44 3741 4008 4274 ±15.06 140 284 0.33 3883 4166 4450 ±20.49 150 302 0.20 3982 4280 4578 ±34.35 KTY81_SER_5 Product data sheet 980 © NXP B.V. 2008. All rights reserved. Rev. 05 — 25 April 2008 9 of 15 KTY81 series NXP Semiconductors Silicon temperature sensors mgg699 3 mgg700 5 R (kΩ) R (kΩ) 150 °C 125 °C 4 150 °C 100 °C 125 °C 2 100 °C 75 °C 3 50 °C 75 °C 50 °C 1 0 10−1 25 °C 2 25 °C 0 °C −25 °C −50 °C 0 °C −25 °C −50 °C 1 1 0 10−1 10 1 Isen(cont) (mA) 10 Isen(cont) (mA) To keep the temperature error low, an operating current of Isen(cont) = 1 mA is recommended for temperatures above 100 °C a. KTY81/1 series Fig 1. b. KTY81/2 series Sensor resistance as a function of operating current mgg703 mgg704 20 30 ∆R (Ω) ∆R (Ω) 20 10 10 0 0 −10 −10 0 1 2 0 Isen(cont) (mA) 2 Isen(cont) (mA) Tamb = 25 °C Tamb = 25 °C a. KTY81/1 series b. KTY81/2 series Fig 2. 1 Deviation of sensor resistance as a function of operating current KTY81_SER_5 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 05 — 25 April 2008 10 of 15 KTY81 series NXP Semiconductors Silicon temperature sensors mgg705 12 Isen(cont) (mA) 8 4 0 −50 Fig 3. 0 50 100 150 Tamb (°C) Maximum operating current for safe operation 7. Package outline 0.45 0.40 4.2 3.6 1 4.8 4.4 2 5.2 5.0 2.5 max 0.7 0.5 Dimensions in mm Fig 4. 14.5 12.7 06-09-15 Minimized package outline SOD70 KTY81_SER_5 Product data sheet 0.48 2.54 0.40 © NXP B.V. 2008. All rights reserved. Rev. 05 — 25 April 2008 11 of 15 KTY81 series NXP Semiconductors Silicon temperature sensors 8. Packing information P T A1 ∆h (p) ∆h A H2 H1 W2 H0 W0 L W1 W F1 F2 D0 F t1 t P2 mbh795 P0 Fig 5. Configuration of bandolier: spread leads Note: Types in bulk packaging have a lead-to-lead distance of 2.54 mm (see Figure 4). The lead-to-lead distance of types packaged on reel have a lead-to-lead distance of 5.08 mm, spread leads (see Figure 5). KTY81_SER_5 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 05 — 25 April 2008 12 of 15 KTY81 series NXP Semiconductors Silicon temperature sensors Table 13. Tape specification Symbol Dimension Specifications Remarks Min Typ Max Tolerance Unit A1 body width 4.4 - 4.8 - mm A body height 5 - 5.2 - mm T body thickness 3.6 - 4.2 - mm P pitch of component - 12.7 - ±1 mm P0 P2 feed hole pitch - 12.7 - ±0.3 mm cumulative pitch error −1 - +1 - mm measured over 20 devices feed hole center to component center - 6.35 - ±0.4 mm to be measured at bottom of clinch F lead-to-lead distance - 5.08 - +0.6/−0.2 mm spread leads ∆h component alignment - 0 1 - mm at top of body W tape width - 18 - ±0.5 mm W0 hold-down tape width - 6 - ±0.2 mm W1 hole position - 9 - +0.7/−0.5 mm W2 hold-down tape position - 0.5 - ±0.2 mm H0 lead wire clinch height - 16.5 - ±0.5 mm H1 component height - - 23.25 - mm L length of snipped leads - - 11 - mm D0 feed hole diameter - 4 - ±0.2 mm t total tape thickness - - 1.2 - mm t1 = 0.3 mm to 0.6 mm F1, F2 lead to snipped lead distance - 2.54 - +0.4/−0.2 mm spread leads H2 clinch height - 2.5 - +0.5/0 mm (p) pull-out force 6 - - - N 9. Revision history Table 14. Revision history Document ID Release date Data sheet status Change notice Supersedes KTY81_SER_5 20080425 Product data sheet - KTY81-2SERIES_4 KTY81-1SERIES_3 Modifications: • The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors. • Legal texts have been adapted to the new company name where appropriate. KTY81-2SERIES_4 20000825 Product specification - - KTY81-1SERIES_3 20000825 Product specification - - KTY81_SER_5 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 05 — 25 April 2008 13 of 15 KTY81 series NXP Semiconductors Silicon temperature sensors 10. Legal information 10.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 10.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 10.3 Disclaimers General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. 10.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 11. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] KTY81_SER_5 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 05 — 25 April 2008 14 of 15 KTY81 series NXP Semiconductors Silicon temperature sensors 12. Contents 1 1.1 1.2 1.3 2 3 4 5 6 7 8 9 10 10.1 10.2 10.3 10.4 11 12 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 11 Packing information. . . . . . . . . . . . . . . . . . . . . 12 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 13 Legal information. . . . . . . . . . . . . . . . . . . . . . . 14 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 14 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Contact information. . . . . . . . . . . . . . . . . . . . . 14 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2008. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 25 April 2008 Document identifier: KTY81_SER_5