Switches Plastic-bodied limit switches Biggy With four different mounting holes, Protection class IP 65 Hinged snap lid Two cable entries M 16 x 1.5 q l l l l l l l l l l l Wide selection of actuators Snap action or slow make & break Galvanically separated contacts Forced disconnection of NC contacts (type dependant) Protection class IP 65 Body and lid PA 6 which is self extinguishing (UL-94 V0) cover PC (UL-94 V0) 4 x 90° actuator positions Adjustment of the AH lever arm position in 90° increments Two cables entries M 16 x 1.5 Terminals numbered in accordance with DIN EN 50013 International approvals Mounting a) Adjustable – two slots for M 4 screws (22 mm centres) b) Adjustable – two slots for M 4 screws (42 mm centres) c) Fixed – two holes for M 5 screws for safety applications (21 mm centres) Mounting screw according to DIN 912 M5 Options l Contact lock (safety pull button reset) l Contact LED display (LED protected within terminal chamber) l Additional lid security with fixing screw d) Fixed - two holes for M 5 screws for safety applications (41 mm centres) Benefits l Two cable entries allow “through wiring” l Hinged snap lid for quick and easy access (screwdriver release) l Lid hinges open to 135° (can also be simply detached) l Internal cover protects the contacts during mounting l Screw terminals with self lifting clamps for easy wiring l Transparent cover for easy adjustment and inspection Accessory equipment page 53 Contact configuration Contact type Switch function Switch contacts Reference Max. Voltage Max. constant current Slow make & break Snap action Slow make & break Changeover Changeover Changeover 1NF/1NO 1NF/1NO 2NF U1/U1Z SU1Z A2Z 500 V 500 V 400 V 10 A 10 A 5A 23 Designation Part number Circuit diagram p Forced disconnect to IEC 947-5-1 chapter 3 Za: not galvanically separated contacts Zb: galvanically separated contacts Slow make & break/snap-action Internal seal (iw)/external seal (w) BI-U1Z w 608.5103.001 BI-SU1Z w 608.5153.008 BI-A2Z w 608.5803.036 BI-U1Z Riw 608.5117.002 BI-SU1Z Riw 608.5167.009 11 12 13 14 11 12 11 12 13 14 23 24 21 22 21 22 23 24 21 22 p Zb l/– w p Zb –/l w p Zb –/l w p Zb l/– iw p Zb –/l iw Voltage max. Permanent current max. In-rush current complies with standards IEC 947-5-1 AC 15/DC 13 Switching frequency max. Mechanical life – number of switching actions Operating temperature min./max. 500 V AC 10 A l 500 V AC 10 A l 500 V AC 10 A l 500 V AC 10 A l 500 V AC 10 A l 100/min. 10 x 106 –30 °C/+80 °C –22 °F/+176 °F 100/min. 10 x 106 –30 °C/+80 °C –22 °F/+176 °F 100/min. 10 x 106 –30 °C/+80 °C –22 °F/+176 °F 100/min. 10 x 106 –30 °C/+80 °C –22 °F/+176 °F 100/min. 10 x 106 –30 °C/+80 °C –22 °F/+176 °F Approvals UL, CSA UL, CSA UL, CSA UL, CSA UL, CSA Weight Delivery: ex-stock/built to order 0.08 kg/0.18 lb l/– 0.08 kg/0.18 lb l/– 0.08 kg/0.18 lb 0.08 kg/0.18 lb –/l l/– Contact travel mm (inch) Tol. ± 0.25 mm Actuator force N Tol. ± 10% Actuator angle ° Tol. ± 3.5° Actuator torque Ncm Tol. ± 10% On Off 0.08 kg/0.18 lb l/– All dimensions in mm (inch) 10 (0.39") Ø14 (0.55") 59 (2.32") 24 32 (1.26") 62 (2.44") 16 (0.63") 20 (0.78") 42 (1.65") 22 (0.88") 40 (1.57") 50 (1.97") 4 (0.16") 8 (0.31") 10.5 (0.41") M20 80 (3.15") 20 (0.79") 3 (0.12") 10 (0.39") 31 (1.22") 20 (0.79") Ø8 (0.31") 27 (1.06") Ø4.2 (0.17") 33 (1.31") 22 (0.87") Switches BI-SU1Z AH 608.5185.012 BI-SU1 AV 608.5186.013 BI-SU1Z Hw 608.5171.017 13 14 13 14 13 14 21 22 21 22 21 22 Zb –/l iw p Zb –/l w 500 V AC 10 A l 500 V AC 10 A l 500 V AC 10 A l 100/min. 10 x 106 –30 °C/+80 °C –22 °F/+176 °F 100/min. 10 x 106 –30 °C/+80 °C –22 °F/+176 °F 100/min. 10 x 106 –30 °C/+80 °C –22 °F/+176 °F UL, CSA UL, CSA UL, CSA 0.12 kg/0.26 lb l/– 0.13 kg/0.29 lb l/– 0.09 kg/0.20 lb l/– Ø25 (0.98") 8 (0.31") 10 (0.39") 5 (0.19") 78 (3.08") 29.5 (1.16") 25.5 (1.00") 93.5-130 (3.68"-5.12") 17 (0.67") 21 (0.83") 23.5 (0.93") 32 (1.26") Ø13.5 (0.53") 96 (3.78") 21 (0.83") 23.5 (0.93") 47 (1.86") 8 (0.31") 17 (0.67") 24 (0.94") 49 (1.92") Ø18 (0.71") 19.5-55 (0.77"-2.16") p Zb –/l iw 25