Technical Data Plastic bodied limit switch Series BI2 Description BI2-SU1Z AH Article number 6085185111 Operating symbol Operating diagram 60° Fixed positioning for safety applications On Off Mounting screw M5 according to DIN 912 or DIN EN ISO 4762 Tolerance: Operating point ± 0,25mm; Operating torque ± 10% Electrical data Rated insulation voltage Conv. thermal current Rated operational voltage Utilization category Direct opening action Short-circuit protective device Protection class Ui Ithe Ue 400V AC 10A 240V AC-15, Ue /Ie 240V/3A acc. to IEC/EN 60947-5-1, Annex K Fuse 2A gL/gG II, totally insulated This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims for defects on account of possible variations of the actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications subject to change without notice! Date of issue: 28.11.2005 / Page 1 of 2 Document : 6085185111_en / Last update : 2 / 3015-05 Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica / www.bernstein-ag.de Vorlage : 0850174281 Orig. 1 Technical Data Plastic bodied limit switch Mechanical data Enclosure Cover Actuator Ambient air temperature Contact type Mechanical life Switching frequency Assembly Connection Conductor cross-sections Cable entrance Weight Installation position Protection type Thermoplastic, glass fibre reinforced Thermoplastic, glass fibre reinforced Lever arm housing, roller (thermoplastic) -30°C … +80°C 1 NC, 1 NO (Zb) 6 10 x 10 switching cycles ≤ 100/min 2 x M4 / 2 x M5 / 2 x M3 front mounting 4 screw connections (M3,5) Solid: 0.5 ... 1.5mm² Litz wire with ferrules: 0.5 ... 1.5mm² 2 x M16x1,5 ≈ 0,12kg Operator definable IP65 acc. to EN 60529; DIN VDE 0470 T1 Actuation The actuating device is preferably started from 2 sides. By loosening the 4 screws the actuation assembly can be rotated in 90 degree increments such that 8 actuation directions are possible. The actuation assembly is to be again fastened to the housing using the 4 screws. Standards VDE 0660 T100, DIN EN 60947-1, IEC 60947-1 VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1 EU Conformity Approvals CCSAUS A300, Q300 Notes The degree of protection (IP code) specified applies solely to a property closed cover and the use of an equivalent cable gland with adequate cable. This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims for defects on account of possible variations of the actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications subject to change without notice! Date of issue: 28.11.2005 / Page 2 of 2 Document : 6085185111_en / Last update : 2 / 3015-05 Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica / www.bernstein-ag.de Vorlage : 0850174281 Orig. 1