Complimentary Analog Products for the TMS320DM36x Digital Media Processor

Complimentary Analog Products for the TMS320DM365 Digital Media Processor
Best Performance
Video
Amplifier
THS7315
™SOIC
TPA2013D1
Class-D
Amplifier
Low Power
Voltage Ref
Audio Codec’s
™DSBGA
™QFN
REF50xx
™SOIC
™MSOP
AIC3107
™QFN
Low-Power Stereo
Video DAC
(Decoder)
Low Power
Touch Screen
Controller
Low Power
Digital Temp Sensor
TVP5150
™TQFP
TSC2008
™QFN
™DSBGA
TMP102
™SOT
• 3 SDTV Video Amplifiers
for CVBS, S-Video, Y’U’V
etc…
• 5.2V/V Gain (14.3dB)
• Constant Output Power
• 1.8-V to 5.5-V Operation
• 2.2-W into an 8-Ω Load
from a 3.6-V Supply
• Low Temperature Drift
(3ppm/°C (max))
• High Accuracy: .05% max
• Low Noise (3uVPP/V)
• Stereo CODEC with
Integrated MONO Class-D
Amp
• Audio ADC + Audio DAC
• Seven Audio Input Pins
Best Value
OPA361
™SC70
TPA2010D1
™DSBGA
REF33xx
™SOIC
™MSOP
AIC3104
™QFN
Low Power
• 3V Video Amp with Internal Gain and Filter
Rail-to-Rail Output
• 2-Pole Reconstruction Filter
Low Quiescent Current: 5.3 mA
• Integrated Level Shifter
Shutdown Current: 1.5uA
• Input Range Includes Ground – DC-Coupled Input
•2.5-W MONO Filter Free
Class-D
• Efficiency: 88% at
400mW, 80% at 100mW
• Improved CMRR, PSRR
TPA2006D1
™SON
• 1.45-W MONO Class-D
• 2.8-mA Quiescent
Current
• 0.5-uA Shutdown Current
• Low Supply Current: 3.9uA (typ)
• Low Temperature Drift: 30ppm/°C (max)
• High Initial Accuracy: ±0.15% (max)
High Output Current: ±5mA
• Stereo Audio DAC+ADC
• Six Audio Output Drivers
• Automatic Gain Control
• 14mW Stereo 48-kHz PB
• 4.1 mW Stereo 48ksps
DAC Playback
• 6.1 mW Stereo 48 ksps
ADC Record
• Low Power Bypass
AIC3254
™QFN
• Ultralow-Power NTSC/PAL Video Decoder
Macrovision Copy Protection Detection
• Two Composite Inputs or One S-Video Input
Ultralow Power Consumption: 113 mw (typical)
• VBI Modes Supported Include: Teletext, Wide Screen Signaling, etc…
Power-Down Mode: <1 mW
• 1.2V to 3.6V, 12-Bit, Nanopower, 4-Wire Micro TOUCH SCREEN CONTROLLER with SPI™
• Effective Throughput Rate: Up to 20kHz (8-Bit) or 10kHz (12-Bit)
1.5 x 2 WCSP-12 and 4 x 4 QFN-16 Packages
• Low Power (12-Bit, 8.2kHz Eq Rate): 30.4mA at 1.2V, fSCLK = 5MHz
44.6mA at 2.7V, fSCLK = 10MHz
• Low Quiescent Current – 10 uA (MAX)
• 10 uA (MAX) shutdown current
• Accuracy: 0.5°C (–25°C to +85°C)
*Please visit ti.com/processorpower for COMPLETE power solutions
12-bit Resolution
Supply Range: 1.4V to 3.6V
SPRT512
Complimentary Analog Products for the TMS320DM365 Digital Media Processor
Best Performance
CDCE913
Clocks
Programmable PLL
Synthesizer
Low Power
Wireless
2.4 GHz RF
Transceiver
Analog
Front End
24/16/8-bit
I/O Expander
™TSSOP
CC2525
™QFN
VSP01M01
™SOIC
™MSOP
TCA6424
™QFN
TSB43EA42
Integrated 1394a
Phy and Link
ESD Protection
±15-kV Array
™BGA
TPD4E001
™SOT
Best Value
Low Power
• Programmable 1-PLL VCXO Clock Synthesizer With 1.8-V and 3.3-V Outputs
Flexible Clock
Driver
• In-System Programmability and EEPROM (Serial Programmable Volatile Register and Nonvolatile EEPROM)
• Flexible Input Clocking Concept (External Crystal: 8 MHz to 32 MHz)
Separate Output Supply
Pins
• Low-Noise PLL Core (PLL Loop Filter Components Integrated and Low Period Jitter (typical 50 ps)
• Wide Supply Range (2.0V – 3.8V)
• Low Current Consumption (27 mA in RX, 31 mA in TX @ 0 dBm)
• -87 dBm sensitivity (at 2 Mbps)
• 10-bit Resolution
• SNR 8 5dB @ 18 dB
Gain
• 2 channel 8-bit DAC
VSP2582
• 24-bit I/O Expander
• No Glitch on Power Up
• 5-V Tolerant I/O Ports
TCA6416
™QFN
™TSSOP
™QFN
™BGA
CC2500
™QFN
• Low Current
Consumption (13.3 mA in
RX, 250 kBaud)
• Programmable data rate
from 1.2 to 500 kBaud
• CCD Signal Processing
• Programmable Gain Amp (PGA)
• 85 mW at 3.0 V and 36 MHz, 1mW in Standby Mode
• 16-bit I/O Expander
• Internal Power-On Reset
• Noise Filter on SCL/SDA
Inputs
TCA6408
™TSSOP
™QFN
™BGA
• 8-bit I/O Expander
• Low Standby Current
Consumption of 1 uA
• Integrated 400/200/100 Mbps 2-port/3-port PHY
2 x 4K-byte isochronous buffers for video data
• Supports bus manager functions and automatic 1394 self-ID verification
• DTCP encryption support on IEEE 1394 bus
SRAM-like 16-bit asynchronous interface
• Support for up to two encrypted/decrypted streams at one time
• Two configurable high-speed data ports for video data, one port serial, one serial or parallel
•4-Channel ESD
Protection
• Low 1.5-pF Input
Capacitance
TPD2E001
™DRY
™DRL
™QFN
*Please visit ti.com/processorpower for COMPLETE power solutions
• 2-Channel ESD Protection
• Low 1-nA (MAX) Leakage Current
• 0.9-V to 5.5-V Supply-Voltage Range
• DRY, DRL and QFN PKG
SPRT512
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DLP® Products
DSP
Clocks and Timers
Interface
Logic
Power Mgmt
Microcontrollers
RFID
RF/IF and ZigBee® Solutions
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/lprf
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Military
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2009, Texas Instruments Incorporated
Similar pages