4067

SHD220212
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4067, REV B
HERMETIC POWER MOSFET
N-CHANNEL
FEATURES:
• 30 Volt, 0.019 Ohm MOSFET
• Hermetically Sealed
• Add a “C” after the SHD for ceramic seals (SHDC220212)
• Surface Mount Package
MAXIMUM RATINGS
ALL RATINGS ARE AT TA = 25°C UNLESS OTHERWISE SPECIFIED.
RATING
GATE TO SOURCE VOLTAGE
CONTINUOUS DRAIN CURRENT VGS = 10V, TC = 25°C
VGS = 10V, TC = 100°C
PULSED DRAIN CURRENT
@ TC = 25°C
OPERATING AND STORAGE TEMPERATURE
THERMAL RESISTANCE JUNCTION TO CASE
TOTAL DEVICE DISSIPATION @ TC = 25°C
SYMBOL
VGS
ID
MIN.
-
TYP.
-
UNITS
Volts
Amps
-
MAX.
± 20
13
9
40
+150
1.7
75
IDM
TOP/TSTG
RθJC
PD
-55
-
BVDSS
30
-
-
Volts
-
-
Amps
°C
°C/W
Watts
ELECTRICAL CHARACTERISTICS
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = 250 μA
DRAIN TO SOURCE ON STATE RESISTANCE
VGS = 10V, ID = 7.3A
VGS = 4.5V, ID = 3.7A
GATE THRESHOLD VOLTAGE VDS = VGS, ID = 250μA
ZERO GATE VOLTAGE DRAIN CURRENT, TJ = 25°C
(VDS = 30V, VGS = 0V), TJ = 125°C
GATE TO SOURCE LEAKAGE FORWARD
VGS = 16V
GATE TO SOURCE LEAKAGE REVERSE
VGS = -16V
TOTAL GATE CHARGE
VGS = 10V,
GATE TO SOURCE CHARGE
VDS = 24V,
GATE TO DRAIN CHARGE
ID = 7.3A
TURN ON DELAY TIME
VDD = 15V,
RISE TIME
ID = 7.3A,
TURN OFF DELAY TIME
RG = 6.2Ω,
FALL TIME
VGS = 10V
DIODE FORWARD VOLTAGE
TJ = 25°C, IS = 7.3A
VGS = 0V
REVERSE RECOVERY TIME
TJ = 25°C,
IS = 7.3A,
di/dt = 100A/μsec,
REVERSE RECOVERY CHARGE
VDD = 25V
INPUT CAPACITANCE
VGS = 0V, VDS = 25V,
OUTPUT CAPACITANCE
f = 1MHz
REVERSE TRANSFER CAPACITANCE
RDS(ON)
VGS(th)
IDSS
1.0
-
-
IGSS
-
-
Qg
Qgs
Qgd
td(ON)
tr
td(OFF)
tf
VSD
-
-
-
-
20
80
80
80
-
trr
-
Qrr
Ciss
Coss
Crss
-
Ω
0.019
0.030
3.0
25
250
100
-100
80
20
23
-
Volts
μA
nA
nC
nsec
1.0
Volts
110
-
nsec
300
1640
660
220
-
μC
©2003 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 •
PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • [email protected] •
pF
SHD220212
SENSITRON
DATA SHEET 4067, REV. B
MECHANICAL DIMENSIONS: in Inches / mm
LCC-5
PINOUT TABLE
DEVICE TYPE
N Channel Mosfet
PIN 1
DRAIN
PIN 2
GATE
PIN 3
SOURCE
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
©2003 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 •
PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • [email protected]