171

SHD226403
SHD226403R
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 171, REV. B
Formerly Part Number SHD2263
HERMETIC POWER MOSFET - N-CHANNEL
FEATURES:
• 200 Volt, 0.21 Ohm, 14A MOSFET
• Isolated Hermetic Metal Package
• Fast Switching
• Low RDS (on)
• Ceramic Seals available (Add a “C” to the part number, i.e. SHDC226403)
• Similar to IRFY240
MAXIMUM RATINGS
ALL RATINGS ARE AT TC = 25°C UNLESS OTHERWISE SPECIFIED.
RATING
GATE TO SOURCE VOLTAGE
ON-STATE DRAIN CURRENT VDS ≥ 2VDS(on), VGS = 10V
PULSED DRAIN CURRENT
@ T C = 25°C
OPERATING AND STORAGE TEMPERATURE
THERMAL RESISTANCE, JUNCTION TO CASE
TOTAL DEVICE DISSIPATION @ TC = 25°C
SYMBOL
VGS
ID (on)
IDM
TOP/TSTG
RθJC
PD
MIN.
-55
-
TYP.
-
MAX.
±20
14
±56
+150
2.1
60
UNITS
Volts
Amps
Amps
°C
°C/W
Watts
SYMBOL
BVDSS
MIN.
200
TYP.
-
MAX.
-
UNITS
Volts
VDS(ON)
-
1.8
2.1
Volts
-
0.21
0.40
4.0
-
Ω
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = 250 µA
DRAIN TO SOURCE ON-STATE VOLTAGE
VGS = 10V, ID = 10A
STATIC DRAIN TO SOURCE ON STATE RESISTANCE
VGS = 10V, ID = 10A
VGS = 10V, ID = 10A, TC = 125°C
GATE THRESHOLD VOLTAGE
VDS = VGS, ID = 250µA
FORWARD TRANSCONDUCTANCE
VDS ≥ 2VDS(on), ID = 10A
ZERO GATE VOLTAGE DRAIN CURRENT
VDS = 0.8xMax. Rating, VGS = 0V
VDS = 0.8xMax. Rating, VGS = 0V, TC = 125°C
GATE TO SOURCE LEAKAGE FORWARD
VGS = 20V
GATE TO SOURCE LEAKAGE REVERSE
VGS = -20V
TURN ON DELAY TIME
VDD = 100V,
RISE TIME
ID =14A,
TURN OFF DELAY TIME
RG = 5.0Ω,
FALL TIME
VGS = 10V
DIODE FORWARD VOLTAGE
TC = 25°C, IS = -14A,
VGS = 0V
REVERSE RECOVERY TIME
TJ = 150°C,
If = IS,
diF/ds = 100A/µsec,
INPUT CAPACITANCE
VGS = 0 V
OUTPUT CAPACITANCE
VDS = 25 V
REVERSE TRANSFER CAPACITANCE
f = 1.0MHz
RDS(ON)
VGS(th)
gfs
2.0
6.0
-
Volts
S(1/Ω)
IDSS
IGSS
-
td(ON)
tr
td(OFF)
tf
VSD
-
trr
-
Ciss
Coss
Crss
-
-
0.1
0.2
17
52
36
30
-
0.25
1.0
100
-100
-
mA
nA
nsec
-1.5
Volts
350
1300
400
130
nsec
-
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web Site - www.sensitron.com • E-Mail Address - [email protected] •
pF
SHD226403
SHD226403R
SENSITRON
DATA SHEET 171
REVISION B
MECHANICAL DIMENSIONS: in Inches / mm
.150 (3.81
Dia.
.140 3.56)
.665 (16.89
.645 16.38)
.537 (13.64
.527 13.39)
1.132 (28.75
1.032 26.21)
1
.035 (0.89
.025 0.63)
3 Places
.200 (5.08
.190 4.82)
.420 (10.67
.410 10.41)
2
.045 (1.14
.035 0.89)
.430 (10.92
.410 10.41)
3
.100(2.54) BSC
2 Places
.120(3.05) BSC
TO-257
PINOUT TABLE
DEVICE TYPE
SHD226403
SHD226403R
PIN 1
DRAIN
GATE
PIN 2
SOURCE
DRAIN
PIN 3
GATE
SOURCE
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web Site - www.sensitron.com • E-Mail Address - [email protected]
Similar pages