370

SENSITRON
SEMICONDUCTOR
SHD226412
SHD226412R
TECHNICAL DATA
DATA SHEET 370, REV. A
HERMETIC POWER MOSFET
N-CHANNEL
DESCRIPTION: 100 VOLT, 33 AMP, 0.06 OHM MOSFET IN A HERMETIC TO-257 PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE AT TA = 25 C UNLESS OTHERWISE SPECIFIED.
RATING
GATE TO SOURCE VOLTAGE
CONTINUOUS DRAIN CURRENT
VGS=10V, TC = 25 C
VGS=10V, TC = 100 C
PULSED DRAIN CURRENT
@ TC = 25 C
OPERATING AND STORAGE TEMPERATURE
TERMAL RESISTANCE JUNCTION TO CASE
TOTAL DEVICE DISSIPATION @ TC = 25 C
SYMBOL
VGS
ID
MIN.
-
TYP.
-
MAX.
20
33
20
99
+150
0.80
150
IDM
TOP/TSTG
R JC
PD
-55
-
BVDSS
RDS(ON)
gfs
UNITS
Volts
Amps
Amps(pk)
C
C/W
Watts
100
-
-
Volts
8.0
-
0.06
-
S(1/ )
-
-
ELECTRICAL CHARACTERISTICS
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = 250 A
DRAIN TO SOURCE ON STATE RESISTANCE
ID = 16.5A, VGS = 10V@TJ = 25 C
FORWARD TRANSCONDUCTANCE
VDS = 80Vdc, IDS = 16.5A
ZERO GATE VOLTAGE DRAIN CURRENT
VDS = 100Vdc, VGS = 0Vdc
VDS = 100Vdc
VGS = 0Vdc, TJ = 125 C
GATE TO BODY LEAKAGE CURRENT
VGS = 20Vdc,
VDS = 0Vdc
TOTAL GATE CHARGE
(VGS = 10 Vdc,
GATE TO SOURCE CHARGE
VDS = 80Vdc,
GATE TO DRAIN CHARGE
ID = 33Adc)
TURN ON DELAY TIME
(VDD = 50V,
RISE TIME
ID = 33Adc,
TURN OFF DELAY TIME
VGS = 10 Vdc,
FALL TIME
RG = 9.1 )
FORWARD VOLTAGE,
(IS = 33Adc, VGS = 0V)
(IS = 33Adc, VGS = 0Vdc, TJ = 125 C)
REVERSE RECOVERY TIME
(IS = 33Adc, VGS = 0Vdc
REVERSE RECOVERY CHARGE
di/dt = 100A/ sec)
INPUT CAPACITANCE
(VDS = 25 Vdc,
OUTPUT CAPACITANCE
VGS = 0 Vdc,
REVERSE TRANSFER CAPACITANCE
f = 1 MHz)
IDSS
IGSS
Qg
Qgs
Qgd
td(ON)
tr
td(ON)
tf
VSD
trr
Qrr
Ciss
Coss
Crss
10
100
-
-
-
52
12
32
18
164
48
83
1.0
0.98
1830
678
559
+100
-100
110
40
330
100
170
2.0
144
.93
2500
1200
1100
A
nA
nC
nsec
Volts
nsec
C
pF
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web Site - www.sensitron.com E-mail Address - [email protected]
SHD226412
SHD226412R
SENSITRON
DATA SHEET 370
REVISION A
MECHANICAL DIMENSIONS: in Inches / mm
.150 (3.81
Dia.
.140 3.56)
.665 (16.89
.645 16.38)
.537 (13.64
.527 13.39)
1.132 (28.75
1.032 26.21)
.200 (5.08
.190 4.82)
.420 (10.67
.410 10.41)
1
2
.045 (1.14
.035 0.89)
.430 (10.92
.410 10.41)
3
.035 (0.89
.025 0.63)
3 Places
.100(2.54) BSC
2 Places
.120(3.05) BSC
TO-257
PINOUT TABLE
DEVICE TYPE
MOSFET IN A TO-257 PACKAGE
STANDARD VERSION
‘R’ VERSION
PIN 1
PIN 2
PIN 3
DRAIN
GATE
SOURCE
DRAIN
GATE
SOURCE
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve
product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the
latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic
equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature
assured safety or by means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the
datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting
from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application
will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any
third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related
laws and regulations.
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web Site - www.sensitron.com E-mail Address - [email protected]