4213

SENSITRON
SEMICONDUCTOR
1C6327
TECHNICAL DATA
DATASHEET 4213, REV-
ZENER 0.5W VOLTAGE REGULATOR
PART NUMBER: 1C6327
CONFIGURATION: Zener 0.5W Voltage Regulator
-All ratings are @ Tc = 25 °C unless otherwise specified.
-Operating temp.: -55 °C to +175 °C
-Storage temp.: -65 °C to +175 °C
MAXIMUM RATINGS / ELECTRICAL CHARACTERISTICS
NOMINAL ZENER VOLTAGE – 5% @ IZ2
MIN ZENER VOLTAGE @ 250 mA
TEST CURRENT
MAXIMUM IMPEDANCE @ IZ2
REVERSE VOLTAGE
MAXIMUM REVERSE CURRENT
o
MAXIMUM REVERSE CURRENT @ TA = +150 C
MAXIMUM KNEE IMPEDANCE @ 250 mA
MAXIMUM VOLTAGE REGULATION
MAXIMUM TEMPERATURE COEFFICIENT *
POWER DISSIPATION *
SYMBOL
VZ2 NOM
VZ1 MIN
IZ2
Max ZZ
VR
Max IR1
Max IR2
Max ZK
Max VZ(reg)
aVZ
Power
VALUE
13.0
11.9
9.5
8
8.0
0.05
10
550
0.55
0.079
0.5
UNITS
Vdc
Vdc
mAmps dc
ohm
Vdc
uAmps dc
uAmps dc
ohm
Vdc
%/°C
Watts
* Adequate energy absorption should be provided.
MECHANICAL DIMENSIONS: In Inches (mm)
CATHODE
0.020 0.003
(0.508 0.076)
0.034 0.003
(0.864 0.076)
Bottom side metalization: Al - 25 kÅ minimum or
Ti/Ni/Ag - 30 kÅ minimum.
Top side metalization: Al - 25 kÅ minimum or
Ti/Ni/Ag - 30 kÅ minimum.
Bottom side is anode, top side is cathode.
Cathode
0.010 ± 0.001 (0.254 ± 0.025)
Anode
œ 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 œ
œ World Wide Web Site - http://www.sensitron.com œ E-Mail Address - [email protected] œ
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected]
Similar pages