2
9 PIN (MALE) CONNECTOR WIRING DIAGRAM
7(+)
DECREASE POSITION
1(+)
6(-)
MIN POSITION INDICATOR
3(+)
8(-)
MAX POSITION INDICATOR
B
4
WIPER
POT LEGS
9
PIN 1
PIN 5
9 PIN D SUB MIN.
CONNECTOR, MALE
TRACKING OUTPUT
SEE WIRING DIAGRAM
PIN 9
9 PIN D SUB MIN.
CONNECTOR, FEMALE
OUTPUT TO DEVICE
6.00 [152.4]
5.38 [136.7]
4.75 [120.7]
4X n0.193 THRU
2.00 [50.8]
NOTES: UNLESS OTHERWISE SPECIFIED:
1. ATM MODEL MCM-001 CONTROL MODULE IS DESIGNED TO OPERATE ANY STANDARD
ATM MOTOR DRIVEN ATTENUATOR OR PHASE SHIFTER WITH OPTION "-24" DC MOTOR.
THE MODULE IS EQUIPPED WITH RED (MAX) & GREEN (MIN) LED POSITION INDICATORS
AND TOGGLE SWITCH CONTROL. THERE IS ALSO A 9 PIN MIMIC CONNECTOR THAT ALLOWS
YOU TO READ THE TRACKING POTENTIOMETER ON THE MOTOR DRIVEN UNIT FROM THE CONTROL MODULE.
2. MCM IS ALSO SUPPLIED WITH THE FOLLOWING ITEMS:
(1 EACH) SELF-SWITCHING {120 VAC-230 VAC TO 24 VDC, 1.25 AMPS MAX} POWER SUPPLY.
(1 EACH) 6 FT CABLE USED BETWEEN THE MCM AND MOTORIZED DEVICE.
(1 EACH) POWER CORD 7'6"
DB9 EXTENSION CABLE
POWER CORD
A
B
3.15 [80.0]
5
2.50 [63.5]
1.00 [25.3]
2(-)
CHASSIS MNT
DC JACK
OPERATION
INCREASE POSITION
2.76 [70.1]
pin#
2(+)
7(-)
REV
A
1
REVISION HISTORY
AUTH
DATE
DESCRIPTION
3/11/2009 INITIAL RELEASE
-
2.34 [59.4]
3
0.10 [2.5]
4
A
POWER SUPPLY
2 POSITION TOGGLE SWITCH
THIRD ANGLE
PROJECTION:
APPROVALS
UNLESS OTHERWISE NOTED,
DIMENSIONS ARE IN INCHES,
TOLERANCES ARE:
FRACTIONS: ±1/64
4
3
DRAWN
BF
www.atmmicrowave.com
3-12-09
CHKD.
DECIMALS
2 PLACE
3 PLACE
APRVD.
UNDER 6"
`.02
`.005
MATERIAL
6" - 12"
`.03
`.010
TREATMENT
OVER 12"
`.06
`.015
FINISH
THE INFORMATION IN THIS
DRAWING IS PROPRIETARY AND
SHALL NOT BE USED OR
DISCLOSED WITHOUT THE PRIOR
WRITTEN CONSENT OF ATM, INC.
DO NOT SCALE DWG.
OUTLINE
ANGLES: ±1/2°
BASIC
DIMENSION
2
ADVANCED TECHNICAL MATERIALS, INC.
TEL: (631) 289-0363 FAX: (631) 289-0358
DATE
MOTOR DRIVE CONTROL BOX
SIZE
B
BLACK SEMI GLOSS ENAMEL
MODEL #
CAGE CODE
9499
ATM DWG #
0R8N4
MCM-001
REVISION
SHEET
1
A
1 OF 1