Download

DATASHEET
BC SERIES ULTRACAPACITORS
FEATURES AND BENEFITS*
TYPICAL APPLICATIONS
Up to 500,000 duty cycles or 10
year life
Low internal resistance
High power performance
310F and 350F capacitance
values
Radial terminals for PCB
mounting
Wind turbine pitch control
Automotive subsystems
Small UPS systems
Consumer and industrial
electronics
Medical equipment
Portable tools
PRODUCT SPECIFICATIONS
ELECTRICAL
BCAP0310
BCAP0350
Rated Capacitance1
310 F
350 F
Minimum Capacitance, initial1
310 F
350 F
2.2 mΩ
3.2 mΩ
31 A
35 A
2.70 V
2.70 V / 2.50 V
2.85 V
2.85 V
250 A
170 A
0.45 mA
0.30 mA
Minimum
-40oC
-40oC
Maximum
65oC
65oC / 70oC
Minimum
-40oC
-40oC
Maximum
70oC
70oC
60 g
60 g
Terminals
Radial Tab
Radial Tab
Vibration
IEC 60068.2.6, SAE J2380
IEC 60068.2.6, SAE J2380
Shock
IEC 60068.2.27, SAE J2464
IEC 60068.2.27, SAE J2464
BCAP0310
BCAP0350
6,600 W/kg
4,600 W/kg
14,000 W/kg
9,500 W/kg
5.2 Wh/kg
5.9 Wh/kg
0.31 Wh
0.35 Wh
Maximum ESR DC, initial1
Test Current for Capacitance and ESRDC1
Rated Voltage
Absolute Maximum Voltage
2
Absolute Maximum Current
Leakage Current at 25 C, maximum
o
3
TEMPERATURE
Operating temperature range
(Cell case temperature)
Storage temperature range
(Stored uncharged)
PHYSICAL
Mass, typical
POWER & ENERGY
Usable Specific Power, Pd4
Impedance Match Specific Power
Specific Energy, Emax
Stored Energy
5
6
7,11
*Results may vary. Additional terms and conditions, including the limited warranty, apply at the time of purchase.
See the warranty details and enclosed information for applicable operating and use requirements.
Page 1
Document number: 1017105.4
maxwell.com
DATASHEET
BC SERIES ULTRACAPACITORS
PRODUCT SPECIFICATIONS (Cont’d)
SAFETY
BCAP0310
BCAP0350
1,200 A
840 A
UL810a, RoHS
UL810a, RoHS
10.9oC/W
10.9oC/W
Thermal Capacitance (Cth), typical 8
60 J/oC
60 J/oC
Maximum Continuous Current
(ΔT = 15oC)8
25 ARMS
21 ARMS
Maximum Continuous Current
(ΔT = 40oC)8
41 ARMS
34 ARMS
1,500 hours
1,500 hours
Capacitance Change
20%
20%
ESR Change
100%
100%
10 years
10 years
Capacitance Change
20%
20%
ESR Change
100%
100%
500,000 cycles
500,000 cycles
Capacitance Change
20%
20%
ESR Change
100%
100%
Test Current
31 A
35 A
4 years
4 years
Short Circuit Current, typical
(Current possible with short circuit from rated
voltage. Do not use as an operating current.)
Certifications
TYPICAL CHARACTERISTICS
THERMAL CHARACTERISTICS
Thermal Resistance (Rca, Case to
Ambient), typical8
LIFE
DC Life at High Temperature1
(at Rated Voltage & Maximum Operating
Temperature)
(% decrease from minimum initial value)
(% increase from maximum initial value)
Projected DC Life at 25oC 1
(held continuously at Rated Voltage)
(% decrease from minimum initial value)
(% increase from maximum initial value)
Projected Cycle Life at 25oC 1,9,10
(% decrease from minimum initial value)
(% increase from maximum initial value)
Shelf Life
(Stored uncharged at 25oC)
Page 2
Document number: 1017105.4
maxwell.com
DATASHEET
BC SERIES ULTRACAPACITORS
ESR AND CAPACITANCE VS TEMPERATURE
180%
Capacitance
DC ESR
Percentage change from value at 25°C
170%
160%
150%
140%
130%
120%
110%
100%
90%
80%
-60
-40
-20
0
20
40
60
80
Temperature (°C)
NOTES
1. Capacitance and ESRDC measured at 25°C using
specified test current per waveform below.
2. Absolute maximum voltage, non-repeated. Not to
exceed 1 second.
3. After 72 hours at rated voltage. Initial leakage current
can be higher.
0.12V2
4. Per IEC 62391-2, Pd = ESR x mass
DC
5. Pmax =
6. Emax =
V2
4 x ESRDC x mass
½ CV2
3,600 x mass
7. Estored = ½ CV2
3,600
Page 3
Document number: 1017105.4
maxwell.com
8. ∆T=IRMS2 x ESR x Rca
9. Cycle using specified test current per waveform
below.
10. Cycle life varies depending upon application-specific
characteristics. Actual results will vary.
11. Per United Nations material classification UN3499, all
Maxwell ultracapacitors have less than 10 Wh capacity
to meet the requirements of Special Provisions
361. Both individual ultracapacitors and modules
composed of those ultracapacitors shipped by
Maxwell can be transported without being treated
as dangerous goods (hazardous materials) under
transportation regulations.
DATASHEET
BC SERIES ULTRACAPACITORS
MOUNTING RECOMMENDATIONS
MARKINGS
Do not reverse polarity. Please refer to document
number 1008238, available at maxwell.com for
soldering recommendations.
BCAP0350 E270 T11
1
2
Products are marked with the following information:
Rated capacitance, rated voltage, product number,
name of manufacturer, positive terminal, warning
marking, serial number.
3
5
4
A
7
1.5
Limit of Tin (Sn)
Plating Area
3
7.7 ±0.5
6
4.9
E
DETAIL E
SCALE 2 : 1
61.5 Max
L
64.9 Max
B
C
F
33.3
D Max
+
Electrical
polarity
45°
Safety vent location
D
Board drillings
Board thickness : 1.5 to 3.2 mm
3.5
E
7
12
6 .3 5
Only for
5.2 (3x)
CQ
1
TEB
1
SBE
1
EPM
1
Modif. Date
6
2.
01
02
03
04
x)
(3
10.1 10.1
F
© All rights Reserved / Maxwell technologies
1
data matrix
code 16x16
(4x4mm)
VIEW F
2
Part Description
BCAP0350 E270 T11
Disposal to third persons or reproduction even in part,
prohibited without writen authority from the compagny.
3
61.5
-
Object
Radial Energy D Cell
P/N: BCAP0350
Depart.
Visa
DATE
Drawn
Design
GiL
08.04.10
Checked
EPM
DeM
10.08.09
Approuv.
QSE
Dimensions (mm)
L (max)
D (max)
4
-
General tolerances ISO 2768 mK, EN ISO 13920
33.3
xx.xx.xx
Material
-
Weight [Kg]
62 g
SolidWorks / All dimensions in [mm]
Package Quantity
250
Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice.
Please contact Maxwell Technologies directly for any technical specifications critical to application.
Page 4
Document number: 1017105.4
maxwell.com
Drawing ref.
BCAP0350 E270 T11 Custome
Echelle:
1:1
DATASHEET
BC SERIES ULTRACAPACITORS
BCAP0310 P270 T10
1
2
3
5
4
6
7
8
3
1.9
7.7 ±0.5
7.2 ±0.15
A
E
1.2
Limit of Tin (Sn)
Plating Area
3.4
1.5
12°
65.55 Max
L
61.5 Max
B
DETAIL E
SCALE 2 : 1
C
F
33.3 Max
D
Electrical
polarity
+
-
45 °
Safety vent location
D
3.5
2.6
E
data matrix
code 16x16
(4x4mm)
VIEW F
3.5
5
Board drillings
Board thickness : 1.5 to 3.2 mm
12
Only for Custom
3.5
6 .3
CQ
1
SBE
1
Part Description
1
2
01
02
03
04
Disposal to third persons or reproduction even in part,
prohibited without writen authority from the compagny.
Dimensions (mm)
L (max)
D (max)
3
BCAP0310 P270 T10
1
EPM
1
General tolerances ISO 2768 mK, EN ISO 13920
Modif. Date
5
F
© All rights Reserved / Maxwell technologies
TEB
4
61.5
Object
Drawing released
26.06.2010 Updated dim.
Depart.
Visa
DATE
Drawn
Design
GiL
07.09.09
Checked
EPM
DeM
10.08.09
Approuv.
QSE
33.3
Rte d
CH-1
Switz
Radial Power D Ce
P/N: BCAP0310 P270 T1
Material
-
Weight [Kg]
62 g
SolidWorks / All dimensions in [mm]
Package
Quantity
xx.xx.xx
Mo
Echelle:
1:1
Sheet format:
250
Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice.
Please contact Maxwell Technologies directly for any technical specifications critical to application. All products featured on this datasheet are covered by the following
U.S. patents and their respective foreign counterparts: 6643119, 7295423, 7307830, 7342770, 7352558, 7384433, 7492571, 7508651, 7791860, 7791861, 7883553, 7935155,
8072734, 8279580, and patents pending.
Maxwell Technologies, Inc.
Global Headquarters
3888 Calle Fortunada
San Diego, CA 92123
USA
Tel: +1 858 503 3300
Fax: +1 858 503 3301
Maxwell Technologies SA
Route de Montena 65
CH-1728 Rossens
Switzerland
Tel: +41 (0)26 411 85 00
Fax: +41 (0)26 411 85 05
Maxwell Technologies, GmbH
Leopoldstrasse 244
80807 München
Germany
Tel: +49 (0)89 / 4161403 0
Fax: +49 (0)89 / 4161403 99
Maxwell Technologies
Shanghai Trading Co. Ltd.
Unit A2,C 12th Floor
Huarun Times Square
500 Zhangyang Road,
Pudong New Area
Shanghai 200122,
P.R. China
Phone: +86 21 3852 4000
Fax: +86 21 3852 4099
MAXWELL TECHNOLOGIES, MAXWELL, MAXWELL CERTIFIED INTEGRATOR, ENABLING ENERGY’S FUTURE, BOOSTCAP, C CELL, D CELL and their respective
designs and/or logos are either trademarks or registered trademarks of Maxwell Technologies, Inc. and may not be copied, imitated or used, in whole or
in part, without the prior written permission Maxwell Technologies, Inc. All contents copyright © 2013 Maxwell Technologies, Inc. All rights reserved. No
portion of these materials may be reproduced in any form, or by any means, without prior written permission from Maxwell Technologies, Inc.
Page 5
Document number: 1017105.4
maxwell.com
0
Drawing ref.
BCAP0310 P270 T10 Customer Drawing
Maxwell Technologies Korea, Ltd.
Room 1524, D-Cube City
Office Tower, 15F #662
Gyeongin-Ro, Guro-Gu,
Seoul, 152-706
South Korea
Phone: +82 10 4518 9829
A3