Catalog

lnGaAs camera
C12741-11
FEATURES
High sensitivity in near-infrared region
Resolution: 640 × 512 pixels
Low dark current with -70 ˚C peltier cooling
(water cooling)
Exchangeable between air/water cooling
APPLICATIONS
Solar cell evaluation
Semiconductor failure analysis
LED failure analysis
EL/PL image acquisition
Optical communication device analysis
The C12741-11 is a near-infrared camera that employs a
640 × 512 pixels InGaAs sensor. -70 ˚C peltier cooling
significantly reduces dark current which leads to
improved image quality and also allows imaging with long
exposure time.
The C12741-11 can detect weak IR light signal with high
S/N ratio, of which image is difficult to take by CCD or
CMOS camera and is suitable for use to evaluate solar
cell or optical communication device analysis.
Non-invasive in-vivo imaging
SYSTEM CONFIGURATION
C-mount
Lens
Standard
InGaAs camera
C12741-11
AC adapter
PC
Frame grabber board
Camera Link interface cable
Circulating water cooler
Software
SPECTRAL RESPONSE
SPECIFICATIONS
* This is typical, not guaranteed.
C12741-11
Type number
100
Quantum efficiency (%)
Forced air-cooled head
Camera head type
Water-cooled head
InGaAs sensor
Imaging device
Effective number of pixels
640 (H) × 512 (V)
20 μm (H) × 20 μm (V)
Pixel size
12.8 mm (H) × 10.24 mm (V)
Effective area
Over 50 % (at 1100 nm)
Quantum efficiency
Full well capacity
300 000 electrons
Cooling method
Forced-air cooled / Water cooled
Cooling temperature
Forced-air cooled
Frame rate
Standard scan
40
20
−60 ˚C
0
800
1100
1200 1300
1400 1500
1600
Wavelength (nm)
This spectral response graph is measured at sensor level.
500 electrons
Readout noise (median) Normal scan mode (typ.)
Dark current
Air cooled (-60 ℃) typ.
500 electrons
300 electrons
130 electrons
16 bit
A/D converter
Exposure time (Internal mode)
1000 7.2 frames/s
Normal scan mode (typ.)
Water cooled (-70 ℃) typ.
900
−70 ˚C
(Full resolution, CameraLink)
Readout noise (rms)
-60 ℃
60
(Ambient temperature: +40 ˚C)
Water cooled
-70 ℃
80
DIMENSIONAL OUTLINES
138.5 ms to 10 s (at Rolling shutter mode)
(Unit : mm)
100 μs to 10 s (at Global shutter mode)
Trigger input connector
Trigger output
110
0 to10 s in 10 μs steps
SMA / CameraLink I/F
3 programmable timing outputs,
Trigger ready output,
Binning
2×2/4×4
Interface
CameraLink base configuration
Camera control
CameraLink
Output signal
CameraLink
6
SMA
Trigger output connector
Image processing functions
60
Global exposure timing output
1-32UN C-mount D=5
4×M4×6-6H
1/4UNC×5
CameraLink
Background subtraction
Shading correction
Software interface
Lens mount
Connector
Power supply
Power consumption
C-mount
AC 100 V to AC 240 V, 50 Hz/60 Hz
Approx. 70 VA
0 ˚C to +40 ˚C
30 % to 80 %
(at Forced-air cooled with
no condensation)
Ambient storage humidity
120
20
40
Mini-Camera Link
Ambient operating humidity
Ambient storage temperature
46.5
63.5
DCAM-SDK
Ambient operating temperature
Performance guaranteed temperature
2×M6×6-6H
4×M3×6-6H
40
20
External control interface
189
(23)
Trigger delay function
Edge trigger, Level trigger, Start trigger
108
External trigger input mode
● Camera head (Approx. 3.4 kg)
Yes
External trigger input
0 ˚C to +40 ˚C
−10 ˚C to +50 ˚C
OPTIONS
● External trigger cable SMA-BNC 5 m: A12106-05
● External trigger cable SMA-SMA 5 m: A12107-05
30 % to 80 %
(with no condensation)
Product and software package names noted in this documentation are trademarks or registered trademarks of their respective manufacturers.
● Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult your local sales representative.
● Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications and external
appearance are subject to change without notice.
© 2016 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Systems Division
812 Joko-cho, Higashi-ku, Hamamatsu City, 431-3196, Japan, Telephone: (81)53-431-0124, Fax: (81)53-435-1574, E-mail: [email protected]
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J 08807, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected]
Germany: Hamamatsu Photonics Deutschland GmbH.: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-265-8 E-mail: [email protected]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court,10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, UK, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: [email protected]
North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected]
Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6 20020 Arese (Milano), Italy, Telephone: (39)02-93581733, Fax: (39)02-93581741 E-mail: [email protected]
China: Hamamatsu Photonics (China) Co., Ltd.: B1201 Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected]
Cat. No. SCAS0100E01
FEB/2016 HPK
Created in Japan
Similar pages